The Isolated Housing Solar Kit 3000W 24V 9600Whdia, system suitable for own consumption or frequent use, ideal for summer.

Characteristics of the Solar Kit system Isolated House 3000W 24V 9600Whdia

The photovoltaic system provided in the attached file can generate 7.29 kWh per day in winter (3 hours of sunshine) and 17.01 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 2,430 W
• Maximum output power to the box: 3000VA
• Daily production in winter: 7.29 kWh
• Summer: daily production: 17.01 kWh
• Annual average daily production: 12.15 kWh

Components of the Solar Kit Isolated House 3000W 24V 9600Whdia

6 x 405W Deep Blue 3.0 JA Solar Mono Solar Panel:  has very particular characteristics. It contains half cells that offer very high efficiency with 405W of power. It has PERC technology and is from the world-renowned manufacturer JA Solar.

1 x Structure 6 Panels 30-45mm Coplanar Falcat: It is a support to be able to place 6 solar panels on a roof that has a correct inclination and orientation. The panels are placed vertically on the structure, and this will have the same inclination as the surface to which it is installed. In this case, the structure is designed for panels of any length and has universal clamps that accept a panel profile of between 30 and 45mm. It is the perfect type of structure for roofs with metal decks, sandwich panels or concrete slabs. This product is shipped in a single pack and can be joined to more of the same structures using the corresponding joining kit.

4 x 6V 600Ah Tensite OPzS Stationary Battery: the 6V 600Ah Tensite OPzS Stationary Battery contains tubular plates that offer very high performance and at the best price. It is perfectly indicated for medium-sized photovoltaic installations. It is a battery with long life and excellent discharge characteristics. You can only find it at AutoSolar.

1 x Victron Smart Solar MPPT 150V 85A Regulator: It is a controller with a charge current of up to 85A and a voltage of up to 150V. In addition, the Smart Solar MPPT 150/85 charge controller has ultra-fast Maximum PowerPoint Tracking (MPPT). The Smart Solar MPPT 150/85 charge controller has advanced detection of the maximum PowerPoint in the event of partial cloud cover. On the other hand, the Smart Solar MPPT 150/85 charge controller model, offered by AutoSolar, has exceptional conversion efficiency, a flexible charging algorithm, reprogrammable auxiliary relay, as well as extensive electronic protection. It has a 5 year guarantee.

1 x Victron Multiplus 24V 3000VA 70+50A Inverter: which can absorb this power at the same time. In addition to being a pure sine wave inverter, it also includes a battery charger. This inverter can be connected to the grid or to a generator, and when the battery runs out, the same inverter will start the generator (if the generator has auto start function). Alternatively, the main power supply is responsible for charging the battery, so there are no power outages and the battery charge level does not matter. The battery is charged as soon as the generator or grid comes in, and when the optimum level is reached, the inverter cuts off the supply to the grid or generator and returns to normal operation to charge the battery with the solar panel. The charger of this inverter is 70A at 24V.

2 x Victron 150A 4P Busbar + cover: device used for high current distribution that also provides connections for batteries and/or DC equipment. Model with 4 high current connections and 150A.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Roll Unifilar Cable 10mm2 H1Z2Z2-K 10m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Roll Unifilar Cable 10mm2 H1Z2Z2-K 10m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Unifilar Cable 16 mm² SOLAR PV ZZ-F Red: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements.

1 x Unifilar Cable 16 mm² SOLAR PV ZZ-F Black: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements.

2 x Unifilar Cable 50 mm² POWERFLEX RV-K Red: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements, such as low voltage industrial connections, urban networks, installations in buildings.

2 x Unifilar Cable 50 mm² POWERFLEX RV-K Black: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements, such as low voltage industrial connections, urban networks, installations in buildings.

3 x Battery Interconnection Cable: iIt is made to measure with the requested terminals, depending on the diameter of the battery screw to which it is going to be connected. It has all the technical characteristics that allow the interconnection of batteries with total safety.

1 x Watertight Box 150x110x70mm: perfect for installing the Legrand Current Distributor inside, both 40A and 100A for larger installations.

1 x 100A Modules Parallel connection distributor: Perfect for gathering the cables coming from the solar panels and connecting them to the distributor. From this moment, we can go with only 2 cables (1 positive and 1 negative) to the charge regulator. Produces significant savings in meters of wiring.

2 x WEIDMULLER PVStick Connectors: they are the most recommended in the case of not having a crimper to be able to connect the usual MC4 connectors. They are compatible with all connector models that are offered as standard in solar panels and do not require any type of tool to be able to assemble them on the cable.

2 x 16mm Cable Eye Terminal - 6mm Eye: prepared for use with 16mm section wiring and for a 6mm diameter screw. 

4 x 50mm Cable Eye Terminal - 8mm Eye: used to crimp 50mm section cables and make the connection on a 8mm diameter screw.

4 x 50mm Cable Eye Terminal - 6mm Eye: prepared for use with 50mm section wiring and for a 6mm diameter screw.