Tensite 6V 250Ah battery is a multi-purpose accumulator with superior performance to classic monobloc batteries.

The Tensite 6V 250Ah Battery is an accumulator with multiple purposes since it can be used for solar energy or for specific devices such as scrubbers and similar machinery. It offers superior performance to classic monobloc batteries for small-sized solar systems.

Characteristics Battery 6V 250Ah Tensite
The Tensite 6V 250Ah Battery is an accumulator designed for all types of use. From photovoltaic solar energy to traction devices such as scrubbers and sweepers. The Tensite 6V 250Ah Battery falls into the deep cycle category, with great robustness and professional manufacturing quality to offer full performance guarantees. Its internal structure with flat cast plates and double insulation together with some polyethylene separators prevent cracks from appearing throughout its useful life. All the technologies that it incorporates help to maximize the useful life and prevent us from problems derived from its use.

The battery has 3 cells, 2V each. To carry out periodic maintenance, there is a cap for each cell where electrolyte must be replaced and which must be maintained between the maximum and minimum marks. Its lead plates allow a long service life, with an average life of more than 6 years as long as the manufacturer's instructions for use are respected and within the estimated life cycles for rational use.

In the event that we intend to use this Tensite 6V 250Ah Battery for a 12V system, we will need 2 units connected in series as shown in the image above.
If, on the other hand, we have a 24V system, we will need 4 units of the 6V 250Ah Tensite Battery and they must be in series as can be seen in the image above.

In the event that our system is 48V, a group of 8 units connected in series will be necessary, as can be seen in the image:

The 6V 250Ah Tensite Battery is deep cycle, offers a construction with full performance guarantees and is from a leading European manufacturer. Overcoming the most demanding manufacturing tests and quality controls on the continent.

Installation of the Battery 6V 250Ah Tensite

For the installation of the battery we must make sure not to mix different models. No special tools are required, beyond a wrench for the nuts that hold the wiring to its terminals. Due to its solid construction, it does not deform throughout its useful life and does not require a special bench to locate it.

Behavior of the cycle of the Battery 6V 250Ah Tensite
The 6V 250Ah Tensite Battery offers a high life cycle rate for this deep cycle model. It provides more than 2000 life cycles for a discharge of around 25% on average at 20º of ambient temperature. If we are around 50% discharge, we will have half the cycles, around 1000. These numbers are the direct result of high-quality manufacturing processes and the use of the best materials to ensure good longevity and an excellent commitment to the cost of production and materials.