Support for galvanized steel inclined roof for 3 solar collectors of 2 m2 each. Made of galvanized steel according to the regulations.

• Made of galvanized steel according to the regulations.

Support for flat surface of galvanized steel for 2 solar collectors of 2 m2 each. Made of galvanized steel according to the regulations.

• Made of galvanized steel according to the regulations.

Support for flat surface of galvanized steel for 3 solar collectors of 2 m2 each. Made of galvanized steel according to the regulations.

• Made of galvanized steel according to the regulations.

Set of parts without metallic structure for the two-axis solar tracker w backstr of 15 solar panels.

Set of pieces without metallic construction, weighing: 37.2 kg.

You can build the rear structure of the solar tracker yourself using this Kit, which provides you with the following parts:

• Rotating parts
• Actuators
• positioner
• Connections Box
• Cables
• Wind sensor.

To build the steel reinforcement, plans and all documentation to build are available through the purchase of the “license to build” with a minimum purchase of 5 licences.

Aluminum structure for installing solar panels on ground or flat roof. For between 1 and 9 panels.

• Structures for between 1 and 9 panels. Choose yours.
• Valid for panels up to 1.05 meters wide.

The support structure for 1 Thermiko CT 2.0/2.5 collector is an assembly scheme for support on a flat surface.

The equipment must be installed in a place that is not in the shadow of any obstacles. There is a single mounting structure suitable for flat or covered surfaces.

Technical description of the support structure for 1 Thermiko CT 2.0/2.5 collector

• Galvanized steel construction.
• Valid for installation on flat terraces or sloping roofs.
• Suitable for 1 Thermiko CT 2.0 model or Thermiko CT 2.5 model collector.

The support structure for 2 Thermiko CT 2.0 collectors is an assembly scheme for support on a flat surface.

The equipment must be installed in a place that is not in the shadow of any obstacles. There is a single mounting structure suitable for flat or covered surfaces.

Technical description of the support structure for 2 Thermiko CT 2.0 collectors

• Galvanized steel construction.
• Valid for installation on flat terraces or sloping roofs.
• Suitable for 2 Thermiko CT 2.0 collectors

The support structure for 2 Thermiko CT 2.5 collectors is an assembly scheme for support on a flat surface.

The equipment must be installed in a place that is not in the shadow of any obstacles. There is a single mounting structure suitable for flat or covered surfaces.

Technical description of the support structure for 2 Thermiko CT 2.5 collectors

• Galvanized steel construction.
• Valid for installation on flat terraces or sloping roofs.
• Suitable for 2 Thermiko CT 2.5 collectors

The support structure for 3 Thermiko CT 2.0 collectors is an assembly scheme for support on a flat surface.

The equipment must be installed in a place that is not in the shadow of any obstacles. There is a single mounting structure suitable for flat or covered surfaces.

Technical description of the support structure for 3 Thermiko CT 2.0 collectors

• Galvanized steel construction.
• Valid for installation on flat terraces or sloping roofs.
• Suitable for 3 Thermiko CT 2.0 collectors

Side ABS brackets for solar panels allow the correct fixing of solar panels to caravans, motorhomes, vans or similar.

ABS side supports for solar panels allow the correct fixing of solar panels to caravans, motorhomes, vans or similar.
ABS side brackets are recommended to attach large panels to the roof of the vehicle where they are installed.

Support ABS Solar panels Side

ABS supports for solar panels are composed of 2 lateral supports that guarantee the correct fastening of the panels to the roof of the caravan, motorhome, van or similar.
ABS brackets can be fixed using special ABS glue.

If the cables of the panels are going to pass through the roof or the sides of the vehicle where they are installed, it is also necessary to install an ABS cable gland to ensure that rain days do not enter the hole, also to avoid the typical whistles of the wind when the caravan is circulating.

ABS brackets are very good to avoid solar panel overheating, the origin of many problems. This overheating is avoided by raising the solar panel from the roof of the caravan a few centimeters, thus allowing to have an air flow that allows the solar panel to cool.