Wind turbine for isolated installations of small power AIR 40 Land 12V 160W Southwest Windpower.

The Southwest Windpower AIR 40 Land wind turbine is the latest evolution in the series.

Most of the improvements can be seen inside the turbine. The main improvements of the Southwest Windpower AIR 40 Land consist of eliminating the noises generated with winds higher than 70 Km / h, since now not only its aero-elastic blades regulate the revolutions, but its electronic controller also detects rapid accelerations, smoothing its operation.

SPECIFICATIONS:

1. Potential energy generated approx. 40 kWh per month at 13.4 mph (6.0 m / s)
2. Swept area 1.07 m2
3. 46-inch rotor diameter (1.17 m)
4. Weight 5.9 kg
5. Packing dimensions 686 x 318 x 229 mm 7.7 kg
6. Wind speed at 8 mph (3.58 m / s)
7. 12 VDC voltage
8. Turbine controller based on microprocessor, intelligent internal controller
9. Die-cast aluminum body (3) Compound injection molded blades
10. Permanent magnet brushless alternator
11. Protection against excessive electronic control of torque
12. Wind resistance of 110 mph (49.2 m / s)
13. Recommended post 48 mm outside diameter
14. Five-year limited warranty

Wind turbine for small power installations AIR 40 Land 24V 160W Southwest Windpower.

The Southwest Windpower AIR 40 Land wind turbine is the latest evolution in the series.

Most of the improvements can be seen inside the turbine. The main improvements of the Southwest Windpower AIR 40 Land consist of eliminating the noises generated with winds higher than 70 Km / h, since now not only its aero-elastic blades regulate the revolutions, but its electronic controller also detects rapid accelerations, smoothing its operation.

SPECIFICATIONS:

1. Potential energy generated approx. 40 kWh per month at 13.4 mph (6.0 m / s)
2. Swept area 1.07 m2
3. 46-inch rotor diameter (1.17 m)
4. Weight 5.9 kg
5. Packing dimensions 686 x 318 x 229 mm 7.7 kg
6. Wind speed at 8 mph (3.58 m / s)
7. 24 VDC voltage
8. Turbine controller based on microprocessor, intelligent internal controller
9. Cast aluminum body
10. Blades (3) molded by compound injection
11. Permanent magnet brushless alternator
12. Protection against excessive electronic control of torque
13. Wind resistance of 110 mph (49.2 m / s)
14. Recommended post 48 mm outside diameter
15. Five-year limited warranty

Wind turbine i 1000 24 Volts 48V 5 black blades with charge regulator with manual and automatic brake.

Wind turbine i 1000 24 Volts 48V 5 blades black color with charge regulator, with manual and automatic brake, compatible with the use of manual solar panels in Spanish and telephone technical assistance.

Due to the production of glass fiber reinforced plastic, the rotor blades are very durable and stable, at the same time unusually light. The casing is made of aluminum, which ensures optimal cooling of the generator.

The maintenance-free (carbon-free) sliding contact ensures good current flow and therefore no twisting of the cable in the mast.

Installation on the mast tube by plug connection. Nominal mast tube diameter required: 37mm nominal size.

It can also be used in combination with photovoltaic solar panels.

Charge regulator

New programmable regulator, to adjust values ​​for cut-off due to a charged battery or program starting voltage.

- Charge controller.- The Ista Power solar/wind hybrid charge controller is a smart controller for the wind turbine and solar cells that are controlled at the same time. The high-end device can also be used as a monitoring system. This combination of wind generator and solar module charges and controls the battery safely and efficiently. The discreet appearance, simple operation and built-in protection functions are characterized by high efficiency and low no-load losses. This version of the controller significantly increases the lifespan and stability of the entire system, especially the batteries.

Additionally, control electronics in the control cabinet monitor the system voltage and brake the wind turbine when it reaches the maximum.

Surge.

Special features and product information are listed below:

• Use of external and high quality semiconductor components (Triacs and Hyper Mosfet). Increases controller life.
• Microprocessor controlled charging with integrated voltage and current limiting.
• Electromagnetic brake control
• Integrated three-phase short circuit switch (brake switch)
• Protection against scratches
• Protection against overcharge, deep discharge, short circuit, overload and incorrect reverse polarity.

Data Sheet

i2000 wind turbine 48V white blades, with charge regulator, with manual and automatic brake.

i2000 wind turbine 48V white blades, with charge regulator, with manual and automatic brake, compatible with the use of solar panels.

For optimal operation of the i2000 series, it is necessary that they have enough wind. Since this model has a lot of power, the i1000 48V series runs very smoothly and it is not necessary to have as much wind.

3 year warranty

Our charge regulators are programmable, for cutting off charged batteries and starting voltage, valid for any type of battery, including lithium.

Original iSTA-Breeze i-2000 robust wind generator

Due to the production of glass fiber reinforced plastic, the rotor blades are very durable and stable. The cover of the wind turbine is made of aluminum, which guarantees optimal cooling of the generator.

The maintenance-free (carbon-free) sliding contact ensures good current flow and therefore does not twist the cable in the mast. Installation on mast tube using plug connection.

Required mast tube inner diameter: 37mm nominal size.

2 years manufacturer's warranty.

Charge Controller Product Description:

• The istaPower wind/solar hybrid charge controller is a smart controller for the wind turbine and solar cells that you control at the same time. The device is high-end.
• Programmable voltage for both starting and braking.
• It is used for safe and efficient charging and monitoring of your battery with the wind generator/solar module combination.
• With built-in protection functions, this device has high efficiency and low no-load losses.
• This version of the controller will significantly increase the lifespan and stability of the entire system, especially the batteries.
• Furthermore, the control electronics in the control cabinet monitor the system voltage and brake the wind turbine when a max. Surge.

Details

• Use of high quality external solid state components (Triacs and Hyper Mosfet). Increases the life of the controller.
• Microprocessor controlled charging with built-in voltage and current limiting.
• Electromagnetic brake control.
• Integrated three-phase short circuit switch (brake switch)
• Lightning protection.
• Protection against overload, deep discharge, short circuit, overload and against incorrect polarity reversal.
• Integrated display The generator automatically brakes when the battery is charged or due to strong wind.
• Compatible with the use of solar panels, it increases the useful life of your batteries by suffering fewer discharges.

• Data sheet

i2000 wind turbine 48V black blades, with charge regulator compatible with the use of solar panels.

i2000 wind turbine 48V black blades, with charge regulator, with manual and automatic brake, compatible with the use of solar panels.

For optimal operation of the i2000 series, it is necessary that they have enough wind. Since this model has a lot of power, the i1000 48V series runs very smoothly and it is not necessary to have as much wind.

3 year warranty

Our charge regulators are programmable, for cutting off charged batteries and starting voltage, valid for any type of battery, including lithium.

Original i-2000 robust wind generator

Due to the production of glass fiber reinforced plastic, the rotor blades are very durable and stable. The cover of the wind turbine is made of aluminum, which guarantees optimal cooling of the generator.

The maintenance-free (carbon-free) sliding contact ensures good current flow and therefore does not twist the cable in the mast. Installation on mast tube using plug connection.

Required mast tube inner diameter: 37mm nominal size.

2 years manufacturer's warranty.

Charge Controller Product Description:

• The istaPower wind/solar hybrid charge controller is a smart controller for the wind turbine and solar cells that you control at the same time. The device is high-end.
• Programmable voltage for both starting and braking.
• It is used for safe and efficient charging and monitoring of your battery with the wind generator/solar module combination.
• With built-in protection functions, this device has high efficiency and low no-load losses.
• This version of the controller will significantly increase the lifespan and stability of the entire system, especially the batteries.
• Furthermore, the control electronics in the control cabinet monitor the system voltage and brake the wind turbine when a max. Surge.

Details

• Use of high quality external solid state components (Triacs and Hyper Mosfet). Increases the life of the controller.
• Microprocessor controlled charging with built-in voltage and current limiting.
• Electromagnetic brake control.
• Integrated three-phase short circuit switch (brake switch)
• Lightning protection.
• Protection against overload, deep discharge, short circuit, overload and against incorrect polarity reversal.
• Integrated display The generator automatically brakes when the battery is charged or due to strong wind.
• Compatible with the use of solar panels, it increases the useful life of your batteries by suffering fewer discharges.

• Data sheet

i2000 48V 5-blade white wind turbine, with charge regulator and very durable and stable rotor blades.

i2000 48V 5-blade white wind turbine, with charge regulator, with manual and automatic brake, compatible with the use of solar panels.

For optimal operation of the i2000 series, it is necessary that they have enough wind. Since this model has a lot of power, the i1000 48V series runs very smoothly and it is not necessary to have as much wind.

3 year warranty

Our charge regulators are programmable, for cutting off charged batteries and starting voltage, valid for any type of battery, including lithium.

Original i-2000 robust wind generator

Due to the production of glass fiber reinforced plastic, the rotor blades are very durable and stable. The cover of the wind turbine is made of aluminum, which guarantees optimal cooling of the generator.

The maintenance-free (carbon-free) sliding contact ensures good current flow and therefore does not twist the cable in the mast. Installation on mast tube using plug connection.

Required mast tube inner diameter: 37mm nominal size.

2 years manufacturer's warranty.

Charge Controller Product Description:

• The istaPower wind/solar hybrid charge controller is a smart controller for the wind turbine and solar cells that you control at the same time. The device is high-end.
• Programmable voltage for both starting and braking.
• It is used for safe and efficient charging and monitoring of your battery with the wind generator/solar module combination.
• With built-in protection functions, this device has high efficiency and low no-load losses.
• This version of the controller will significantly increase the lifespan and stability of the entire system, especially the batteries.
• Furthermore, the control electronics in the control cabinet monitor the system voltage and brake the wind turbine when a max. Surge.

Details

• Use of high quality external solid state components (Triacs and Hyper Mosfet). Increases the life of the controller.
• Microprocessor controlled charging with built-in voltage and current limiting.
• Electromagnetic brake control.
• Integrated three-phase short circuit switch (brake switch)
• Lightning protection.
• Protection against overload, deep discharge, short circuit, overload and against incorrect polarity reversal.
• Integrated display The generator automatically brakes when the battery is charged or due to strong wind.
• Compatible with the use of solar panels, it increases the useful life of your batteries by suffering fewer discharges.

• Data sheet

i2000 48V wind turbine with 5 black blades, with charge regulator, compatible with the use of solar panels.

i2000 48V wind turbine with 5 black blades, with charge regulator, with manual and automatic brake, compatible with the use of solar panels.

For optimal operation of the i2000 series, it is necessary that they have enough wind. Since this model has a lot of power, the i1000 48V series runs very smoothly and it is not necessary to have as much wind.

3 year warranty

Our charge regulators are programmable, for cutting off charged batteries and starting voltage, valid for any type of battery, including lithium.

Original  i-2000 robust wind generator

Due to the production of glass fiber reinforced plastic, the rotor blades are very durable and stable. The cover of the wind turbine is made of aluminum, which guarantees optimal cooling of the generator.

The maintenance-free (carbon-free) sliding contact ensures good current flow and therefore does not twist the cable in the mast. Installation on mast tube using plug connection.

Required mast tube inner diameter: 37mm nominal size.

2 years manufacturer's warranty.

Charge Controller Product Description:

• The istaPower wind/solar hybrid charge controller is a smart controller for the wind turbine and solar cells that you control at the same time. The device is high-end.
• Programmable voltage for both starting and braking.
• It is used for safe and efficient charging and monitoring of your battery with the wind generator/solar module combination.
• With built-in protection functions, this device has high efficiency and low no-load losses.
• This version of the controller will significantly increase the lifespan and stability of the entire system, especially the batteries.
• Furthermore, the control electronics in the control cabinet monitor the system voltage and brake the wind turbine when a max. Surge.

Details

• Use of high quality external solid state components (Triacs and Hyper Mosfet). Increases the life of the controller.
• Microprocessor controlled charging with built-in voltage and current limiting.
• Electromagnetic brake control.
• Integrated three-phase short circuit switch (brake switch)
• Lightning protection.
• Protection against overload, deep discharge, short circuit, overload and against incorrect polarity reversal.
• Integrated display The generator automatically brakes when the battery is charged or due to strong wind.
• Compatible with the use of solar panels, it increases the useful life of your batteries by suffering fewer discharges.

• Data sheet

Turbine Greatwatt S700 Dual Voltage 400w nominal Marine and 24v with external regulator

The main features of this wind turbine are :

A wind turbine that will amazed!!

Rotation = load : The S-700 is powered by a technology called "super voltage boosting" which allows the turbine to reach charging voltage battery a wind speed very low (3m / s). The wonderful thing is that with only 300RPM 24V system can start charging. (Note: do not use 12V systems Boosting technology, but with the benefit of the unique design of the blades and alternator, its load is much better.
electronic Aerodynamics and television.

The smallest and Powerful : With the technology applied in the high efficiency blades, control and alternator, the S-700 can provide maximum performance the world in the same size, weight and diameter of rotation.
Maximum protection : the S-700 offers the best protection, for example, the voltage auto-braking, slowing the turbine in strong winds (hysteresis braking), completed during a cyclone off, protecting the battery charge, etc.
Protection speeding : To "use" Fully wind power, the blades are stopped for speeds of 0m / s to 25m / s. Once the turbine sits a wind speed exceeding 25 m / s, will shut down completely and stop charging.
Constant charging current : In the same wind speed condition, when the battery is increasingly full load current of the wind generator will diminishing, but the S-600 can always maintain a constant load current, to make use of wind energy, and at the same time it can also effectively protect the battery.
Material

Wheel CFRP : The blades are made of CFRP, and manufactured by a precise injection process, thus S-700 has the best rigidity and efficiency and minimal vibration.
Magnalium Frameworks : The body is made of magnalium turbine, a very corrosive and hard materials.
Accessories

Stop Switch : We offer a stop switch (50 amps DC), which can be used to "stop" the turbine for service or any other reason. You will find it very useful and necessary. Disconnect breaker: breaker offer a slower rate (15 amps DC), which can be used to disconnect the battery and prevents the possibility of further damage in the event of a system failure or a wind generator. < / li>
Corrosion Inhibitor : a capsule of corrosion inhibitor is included in your wind turbine. Its main features are corrosion, sealing, heat resistant, etc., Is very useful for mounting the blades.

300W mini wind Turbine. Ideal to complement your portable or fixted solar equipment or installation.

Served with cables, controller, inverter and everything needed to assemble and operate.

1. Content:
2. Body of the rotor (generator).
3. Shaft flange.
4. Rudder plate.
5. Controller.
6. Lead Wire: 50 meters.
7. Turbine blades: 3.
8. Section of the tower and support poles.
9. Cables, brackets and screws.
10. Inverter: 300 W / 220 V / 50 Hz
11. Installation Instructions.
12. User Manual.

Vertical axis wind turbine Darrieus rotor combines (supporting) and Savonius (drag) on a single 8-blade rotor.

Vertical axis wind turbine using 100% Spanish.

• Always faces the wind.
• Take advantage of all wind.
• Starts rotating at 3.5 m / s.
• No need braking system.
• Low maintenance.
• Easy urban integration for its low noise level.
• Can be installed in 4 hours.
• Excellent advertising medium.

• Private homes and residential buildings.
• Neighboring communities (elevator, lighting, pool, etc..).
• Hotels, cottages, spas ...
• Sports facilities such as yacht clubs and golf courses.
• Agriculture and livestock. Wineries, farms and dairies, wells and pumping stations.
• Mountain huts, forest watchtowers, ski resorts.

• Vertical axis rotor Kliux Geo1800 (VAWT).
• Gearbox, permanent magnet generator.
• Protected steel mast anticorrosion paint.
• Etesian wind inverter Mini 2600, 2 kW, 230 Vac, 50 Hz (SANTERNO).
• GSM communication module (optional).
• Weather Station (optional).

• + Generator rotor weight and transmit: 116.67 kg. + = 237.04 kg 120.37 kg.
• Mast Weight: from 232.6 kg.
• Rotor diameter: 2.36 m.
• Height of rotor / transmission: 3 m / 0.83 m.
• Mast height: from 6 m.

• Generator rated power: 1.800 W.
• Speed: 3.5 m / s.
• Cut-out wind speed: no need.
• Aerodynamic brake.
• Maximum rotor RPM: 106 RPM.
• Sound level at a distance of 10 m: 32'6 dBA.
• Durability: 25 years.

• Vanes material: expanded polyurethane.
• Output voltage: 230 Vac.
• Certifications: ISO: 9001, 14001 and CE.
• Process Certifications: IEC 61400 -2 / -11 / -12, 9.1 AWEA, BWEA 2009 Standard.