Solar kit with lithium batteries, for self-consumption and / or isolated system, you can save up to 5 kW of electricity per day with this equipment.

This solar kit has a solar field of 1,590Wp that will give us a daily average of 5000Wh as we recommend an installation with an inclination of 30º and orientation as far as possible, and we will obtain enough energy to have service in the installation based on estimated consumption.

The average life of this type of solar panel is 30 years, with a 25 year warranty granted by the manufacturer.
We will have accumulated 4800Wh in our batteries at 48Vdc, but we will only take advantage of 90% to extend its useful life reaching 6000 cycles under these conditions.

The average life of this type of batteries in this application is 15 years, with a 10 year warranty granted by the manufacturer.

The "brain" of our installation will be the inverter, which has an instantaneous power of 5000W and which will allow us to connect in a timely manner a larger consumer than the estimates; the microwave or some tool ... without protecting the equipment for it.

We configure any kit you need.

With this kit you can connect:

1. 20 light bulbs
2. Mobile charger.
3. Washing machine (cold water)
4. 1 TV
5. Laptop.
6. Pool pump.
7. Refrigerator Combi.
8. Pressure pump.
9. Small air conditioner

Kit features:

• 6 PLATES OF 265W POLYCRYSTALLINE 60 CELLS.
• 1 INVERTER CHARGER REGULATOR AXPER 5K-48V MKS, MPPT 80A
• 2 LITHIUM BATTERIES FROM 2.4 kw / h to 48V
• CONECTORS

The Growatt 3000W 16kWhday Car Charger Lithium Solar Kit, self-consumption system with very low cost and high performance.

Characteristics of the 3000W 16kWhday Growatt Car Charger Lithium Solar Kit system

The photovoltaic system provided in the attached file can generate 6.83 kWh per day in winter (3 hours of sunshine) and 15.93 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 2,275 W
• Maximum output power to housing: 2000W
• Daily production in winter: 6.83 kWh
• Summer: daily production: 15.93 kWh
• Annual average daily production: 11.38 kWh

Components of the Solar Kit Lithium Car Charger 3000W 16kWhday Growatt

7 x Solar Panel 455W JA Solar Mono PERC: guaranteed for 25 years and made of monocrystalline silicon from the famous international brand JA Solar. It offers one of the best products for our photovoltaic systems, as it is one of the best-performing monocrystalline models with excellent value for money. It can supply the solar system with about 1,350 Wh per day in winter and almost twice as much in summer. PERC technology with high performance monocrystalline half cells offers more than 20% efficiency for the size of the module. It measures 2112 x 1052 x 35mm and includes a junction box for each positive and negative cable with MC4 connectors at each end. The solar module includes an attached aluminum frame that allows it to be attached to any structure, allowing for additional dimensions.

1 Inverter x Growatt MIN 3000TL-XH Inverter: product of great nature and with a leftover, compacted and modern project. Internally lower security single-phase of the MIN-XH gradation, with models of even 6000W. All this line of inverters has 2 MPPT trackers and a very wide operating function. These inverters are connected to the electrical fence of the ship, where they are installed to inject the battle that the panels produce and collect on the electricity bill. They offer excellent characteristics for a short amortization due to their exact price. Also, melody compatible with lithium batteries, so they can be co-hosted.

2 x Growatt SPM Single Phase Wattmeter: a meter calibrated to know the amount of energy required by your electrical installation. This also allows the inverter to set whether to supply excess power to the grid. This power meter is compatible with Growatt single-phase inverters. The purchase of a power meter must always be associated with the corresponding inverter. If you buy this power meter without inverter, we will refund your money.

2 x Growatt ARK 2.5H-A1 HV Lithium Battery Module: This high-voltage battery module is suitable for Growatt self-consumption systems that use batteries for surplus storage. This lithium battery offers a long lifespan and can be supplemented with an additional 2.56 kWh module to increase the capacity of our battery bank. With an extensive warranty and more than 6,000 cycles of use, Growatt ARK batteries for self-consumption are a reliable and long-lasting option for your solar system.

1 x Growatt ARK BDC 95045-A1 Lithium Battery BMS: This BMS acts as an interface between the Growatt ARK battery bank and the Growatt MIN-XH self-consuming hybrid inverter. They communicate with each other to optimize battery charging and discharging, and monitor battery status along with the rest of the system.

1 x Growatt ARK Battery Base: This base serves as a bottom bracket for attaching the Growatt ARK Battery to the tower. Must include one per battery tower.

1 x 3.6kW electric car charger Growatt THOR 03AS-S: it is capable of charging up to 3.6 kW with single-phase current, it is compatible with electric vehicles from Tesla, Nissan, Hyundai, BYD, BMW and Renault, and has Wi-Fi connectivity.

1 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.

1 x Structure 3 Panels 30-45mm Coplanar Falcat: support to allow the placement of 3 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Growatt ARK XH-MIN Wiring: This cable is used to connect the ARK battery tower type HV-XH to the corresponding inverter. They include suitable connection terminals to make the installation of the system as easy as possible.

1 x Growatt Shine-Link X Monitoring: used to establish the Internet connection to the inverters of the Growatt MIN-X range. With this device, Wi-Fi is not required, as the monitoring plugin consists of two components. A router with base and internet connected to a socket, and an adapter connected to an inverter. An automatic connection is established between the two, making the inverter available to the Internet and allowing its operation to be monitored on the portal provided by the manufacturer.

1 x Unifilar Cable Roll 6mm2 H1Z2Z2-K 30m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Unifilar Cable Roll 6mm2 H1Z2Z2-K 30m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x WEIDMULLER PVStick Connectors - Most recommended if you don't have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.

Solar kit with lithium batteries, for self-consumption and / or isolated system, you can save up to 9 kW of electricity per day with this equipment.

This solar kit has a solar field of 1,590Wp that will give us a daily average of 5000Wh as we recommend an installation with an inclination of 30º and orientation as far as possible, and we will obtain enough energy to have service in the installation based on estimated consumption.

The average life of this type of solar panel is 30 years, with a 25 year warranty granted by the manufacturer.
We will have accumulated 4800Wh in our batteries at 48Vdc, but we will only take advantage of 90% to extend its useful life reaching 6000 cycles under these conditions.

The average life of this type of batteries in this application is 15 years, with a 10 year warranty granted by the manufacturer.

The "brain" of our installation will be the inverter, which has an instantaneous power of 5000W and which will allow us to connect in a timely manner a larger consumer than the estimates; the microwave or some tool ... without protecting the equipment for it.

We configure any kit you need.

With this kit you can connect:

• 1 Fridge A +++
• 8 Led Lights 10W for 4h / day
• 2 Mobile charges for 3h / day
• 1 Flat TV 75W for 8h / day
• 1 Laptop for 4h / day
• 1 Well pump 1CV maximum 1h / day
• 1 microwave
• 1 Working machinery of approximately 1,500W for 2h / day
• 1 Washing machine twice a week (during the day and with cold water)
• 1 alarm

Kit features:

6 PLATES OF 265W POLYCRYSTALLINE 60 CELLS.
1 INVERTER CHARGER REGULATOR AXPER 5K-48V MKS, MPPT 80A
4 LITHIUM BATTERIES FROM 2.4 kw / h to 48V

The Huawei 2000W 10000Whdia Self-Consumption Kit, a very low-cost, high-performance self-consumption system.

Characteristics of the Huawei 2000W 10000Whdia Self-consumption Kit system

The solar energy system proposed in the annex can generate 6.90 kWh per day (3 hours of sunshine) in winter and 16.10 kWh per day (7 hours of sunshine) in summer.

The recommended system characteristics are as follows.

• Installed solar generation: 2,300W
• Household Max Output: 2000W
• Daily production in winter: 6.90 kWh
• Summer daily production: 16.10 kWh
• Annual average daily production: 11.50 kWh

Components of the Huawei 2000W 10000Whdia Self-consumption Kit

5 x JA Solar 460W 24V Monocrystalline PERC panel: made of monocrystalline silicon from the famous international brand JA Solar, guaranteed for 25 years. It offers one of the best products for our photovoltaic systems and is one of the best performing monocrystalline models with excellent value for money. It can supply the solar system with about 1350 Wh per day in winter and almost twice as much in summer. PERC technology with high performance monocrystalline half cells offers more than 20% efficiency for the module size. It measures 2120 × 1052 x 35mm and includes a junction box for each positive and negative wire with MC4 connectors on each end. The solar module includes an assembled aluminum frame that allows for additional dimensions and is ready to be fixed to any structure. 

1 x Structure 5 Panels 30-45mm Coplanar Falcat: support to allow the placement of 5 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Huawei Luna2000 5kWh Lithium Battery Module: a high-voltage energy storage module with a 10-year warranty and compatible with Huawei KTL-L1 and three-phase KTL-M1 single-phase inverters. A BMS is required on top for a complete system to exist and can be expanded with up to two units. 20, 25 or 30 kWh require an additional BMS module and a total of 4.5 or 6 battery modules. It has IP65 protection and has a total expanded capacity of up to 30 kWh for self-consumption systems using Huawei hybrid inverters.

1 x Huawei Luna2000 Lithium Battery BMS: a controller that acts as an interface between the inverter and the Huawei Luna battery. Compatible with Huawei KTL Single-Phase L1 Inverter and KTL Three-Phase M1 Inverter. This BMS sits on top of the battery and is used for systems from 5 to 15 kWh, depending on whether one to three battery modules are installed. 20, 25 or 30 kWh require additional BMS modules and a total of 4.5 or 6 battery modules. It has IP65 protection and an extended capacity of up to 30kWh for our self-consumption systems with Huawei hybrid inverters.

1 x Carlo Gavazzi EM112DIN Wattmeter: a device tuned to measure the amount of energy flowing through your home, optimizing the energy delivery of your inverter to the maximum to avoid feeding the grid or increase production according to your preferences You can control or in a self-consumption configuration. A very popular Carlo Gavazzi model that is widely compatible with many inverters on the market.

1 x Huawei SUN2000-2KTL-L1 2000W inverter: characterized by the availability to work in grid connection installations. Lithium batteries can be added to store additional power for consumption during times of higher consumption than solar power and at night. It includes high-level features such as two MPPT trackers with very wide working ranges. It also includes support for a custom optimizer that prevents partial shadows, but it's perfect for being able to set two directions on the panel. Includes wireless communication, IP65 protection, 5-year manufacturer's warranty and more.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

2 x WEIDMULLER PVStick Connectors – Most recommended if you don't have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.

The Huawei 3000W 15000Whdia Self-Consumption Kit, a very low-cost, high-performance self-consumption system.

Characteristics of the Huawei 3000W 15000Whdia Self-consumption Kit system

The photovoltaic system provided in the attached file can generate 9.56 kWh per day in winter (3 hours of sunshine) and 22.30 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 3,185 W
• Maximum output power to housing: 3000W
• Daily production in winter: 9.56 kWh
• Summer: daily production: 22.30 kWh
• Annual average daily production: 15.93 kWh

Components of the Huawei 3000W 15000Whdia Self-consumption Kit

7 x 455W JA Solar Mono PERC Solar Panel: guaranteed for 25 years and made of monocrystalline silicon from the famous international brand JA Solar. It offers one of the best products for our photovoltaic systems, as it is one of the best-performing monocrystalline models with excellent value for money. It can supply the solar system with about 1,350 Wh per day in winter and almost twice as much in summer. PERC technology with high performance monocrystalline half cells offers more than 20% efficiency for the size of the module. It measures 2112 x 1052 x 35mm and includes a junction box for each positive and negative cable with MC4 connectors at each end. The solar module includes an attached aluminum frame that allows it to be attached to any structure, allowing for additional dimensions.

1 x Structure 3 Panels 30-45mm Coplanar Falcat: support to allow the placement of 3 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.

1 x Huawei Luna2000 5kWh Lithium Battery Module: a high-voltage energy storage module with a 10-year warranty and compatible with Huawei KTL-L1 and three-phase KTL-M1 single-phase inverters. A BMS is required on top for a complete system to exist and can be expanded with up to two units. 20, 25 or 30 kWh require an additional BMS module and a total of 4.5 or 6 battery modules. It has IP65 protection and has a total expanded capacity of up to 30 kWh for self-consumption systems using Huawei hybrid inverters.

1 x Huawei Luna2000 Lithium Battery BMS: a controller that acts as an interface between the inverter and the Huawei Luna battery. Compatible with Huawei KTL Single-Phase L1 Inverter and KTL Three-Phase M1 Inverter. This BMS sits on top of the battery and is used for systems from 5 to 15 kWh, depending on whether one to three battery modules are installed. 20, 25 or 30 kWh require additional BMS modules and a total of 4.5 or 6 battery modules. It has IP65 protection and an extended capacity of up to 30kWh for our self-consumption systems with Huawei hybrid inverters.

1 x Carlo Gavazzi EM112DIN Wattmeter: a device tuned to measure the amount of energy flowing through your home, optimizing the energy delivery of your inverter to the maximum to avoid feeding the grid or increase production according to your preferences You can control or in a self-consumption configuration. A very popular Carlo Gavazzi model that is widely compatible with many inverters on the market.

1 x Huawei SUN2000-2KTL-L1 3000W Inverter: It has an output power of 3000W and is ready to use in grid connection installations. Lithium batteries can be added to store additional power for consumption during times of higher consumption than solar power and at night. It includes high-level features such as two MPPT trackers with very wide working ranges. It also includes support for a custom optimizer that prevents partial shadows, but it's perfect for being able to set two directions on the panel. Includes wireless communication, IP65 protection, 5-year manufacturer's warranty and more.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

2 x WEIDMULLER PVStick Connectors - Most recommended if you don't have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.

The Huawei 3680W 18500Whdia Self-Consumption Kit, a very low-cost, high-performance self-consumption system.

Characteristics of the Huawei 3680W 18500Whdia Self-consumption Kit system

The photovoltaic system provided in the attached file can generate 10.92 kWh per day in winter (3 hours of sunshine) and 25.48 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 3,640 W
• Daily production in winter: 10.92 kWh
• Summer: daily production: 25.48 kWh
• Annual average daily production: 18.20 kWh

Components of the Huawei 3680W 18500Whdia Self-consumption Kit

8 x 455W JA Solar Mono PERC Solar Panel: guaranteed for 25 years and made of monocrystalline silicon from the famous international brand JA Solar. It offers one of the best products for our photovoltaic systems, as it is one of the best-performing monocrystalline models with excellent value for money. It can supply the solar system with about 1,350 Wh per day in winter and almost twice as much in summer. PERC technology with high performance monocrystalline half cells offers more than 20% efficiency for the size of the module. It measures 2112 x 1052 x 35mm and includes a junction box for each positive and negative cable with MC4 connectors at each end. The solar module includes an attached aluminum frame that allows it to be attached to any structure, allowing for additional dimensions.

1 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.

2 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Huawei Luna2000 5kWh Lithium Battery Module: a high-voltage energy storage module with a 10-year warranty and compatible with Huawei KTL-L1 and three-phase KTL-M1 single-phase inverters. A BMS is required on top for a complete system to exist and can be expanded with up to two units. 20, 25 or 30 kWh require an additional BMS module and a total of 4.5 or 6 battery modules. It has IP65 protection and has a total expanded capacity of up to 30 kWh for self-consumption systems using Huawei hybrid inverters.

1 x Huawei Luna2000 Lithium Battery BMS: a controller that acts as an interface between the inverter and the Huawei Luna battery. Compatible with Huawei KTL Single-Phase L1 Inverter and KTL Three-Phase M1 Inverter. This BMS sits on top of the battery and is used for systems from 5 to 15 kWh, depending on whether one to three battery modules are installed. 20, 25 or 30 kWh require additional BMS modules and a total of 4.5 or 6 battery modules. It has IP65 protection and an extended capacity of up to 30kWh for our self-consumption systems with Huawei hybrid inverters.

1 x Carlo Gavazzi EM112DIN Wattmeter: a device tuned to measure the amount of energy flowing through your home, optimizing the energy delivery of your inverter to the maximum to avoid feeding the grid or increase production according to your preferences You can control or in a self-consumption configuration. A very popular Carlo Gavazzi model that is widely compatible with many inverters on the market.

1 x Huawei SUN2000-3.6KTL-L1 3600W Inverter: It has an output power of 3600W and is ready to use in grid connection installations. Lithium batteries can be added to store additional power for consumption during times of higher consumption than solar power and at night. It includes high-level features such as two MPPT trackers with very wide working ranges. It also includes support for a custom optimizer that prevents partial shadows, but it's perfect for being able to set two directions on the panel. Includes wireless communication, IP65 protection, 5-year manufacturer's warranty and more.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

2 x WEIDMULLER PVStick Connectors - Most recommended if you don't have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.

Solar Kit Self-consumption Car Charger 6000W 30kWhdia Ingeteam, its shape and dimensions allow it to use the maximum possible power.

Characteristics of the Ingeteam 6000W 30kWhdia Car Charger Self-consumption Solar Kit system

The photovoltaic system provided in the attached file can generate 19.11 kWh per day in winter (3 hours of sunshine) and 44.59 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 6,370 W
• Daily production in winter: 19.11 kWh
• Summer: daily production: 44.59 kWh
• Annual average daily production: 31.85 kWh

Components of the Self-consumption Solar Kit Car Charger 6000W 30kWhdia Ingeteam

14 x 455W JA Solar Mono PERC Solar Panel: guaranteed for 25 years and made of monocrystalline silicon from the famous international brand JA Solar. It offers one of the best products for our photovoltaic systems, as it is one of the best-performing monocrystalline models with excellent value for money. It can supply the solar system with about 1,350 Wh per day in winter and almost twice as much in summer. PERC technology with high performance monocrystalline half cells offers more than 20% efficiency for the size of the module. It measures 2112 x 1052 x 35mm and includes a junction box for each positive and negative cable with MC4 connectors at each end. The solar module includes an attached aluminum frame that allows it to be attached to any structure, allowing for additional dimensions.

+1 x Ingeteam Ingecon Sun Storage 6TL M Hybrid Inverter: there is the option of storing surplus production in batteries. The electricity can be directly converted to 230V and supplied for consumption, and the extra energy generated by the panel can be stored to charge the battery. At night, the inverter powered the house mainly from battery charges, which could be stored throughout the day. If it is insufficient, it draws energy from the network so that the supply is not lost. When the sun comes out again, it takes over consumption and recharges the battery with solar energy. With two MPPT trackers, compatible with lithium battery packs from different manufacturers such as LG, BYD, Pylontech. It can work in isolated mode or connect to the network for self-consumption.

1 x Carlo Gavazzi EM112DIN Wattmeter: a device tuned to measure the amount of energy flowing through your home, optimizing the energy delivery of your inverter to the maximum to avoid feeding the grid or increase production according to your preferences You can control or in a self-consumption configuration. A very popular Carlo Gavazzi model that is widely compatible with many inverters on the market. 

1 x Orbis Viaris UNI BT2 Type 2 7.4kW electric car charger - Wi-Fi: 7.4kW single-phase smart charger output through type 2 hose with cover. With the e-VIARIS mobile application you can, among other things, monitor the charger and control the requested power.

1 x Orbis 100A single-phase wattmeter direct measurement

2 x Structure 5 Panels 30-45mm Coplanar Falcat: support to allow the placement of 5 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

2 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 60m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 60m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1x WEIDMULLER PVStick Connectors - Most recommended if you don't have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.

The 4000W 20000Whdia Growatt Three-Phase Hybrid Kit, a single-phase solar self-consumption system for private homes and small businesses.

System characteristics of the Three-Phase Hybrid Kit 4000W 20000Whdia Growatt

The photovoltaic system provided in the attached file can generate 12.29 kWh per day in winter (3 hours of sun) and 28.67 kWh in summer (7 hours of sun).

The characteristics of the proposed system are the following:

• Installed solar generation: 4,095 W
• Daily production in winter: 12.29 kWh
• Summer: daily production: 28.67 kWh
• Annual average daily production: 20.48 kWh

Components of the Three-Phase Hybrid Kit 4000W 20000Whdia Growatt

9 x Solar Panel 455W JA Solar Mono PERC: guaranteed for 25 years and made of monocrystalline silicon from the famous international brand JA Solar. It offers one of the best products for our photovoltaic systems, as it is one of the best-performing monocrystalline models with excellent value for money. It can supply the solar system with about 1,350 Wh per day in winter and almost twice as much in summer. PERC technology with high performance monocrystalline half cells offers more than 20% efficiency for the module size. It measures 2112 x 1052 x 35mm and includes a junction box for each positive and negative wire with MC4 connectors on each end. The solar module includes an attached aluminum frame that allows it to be attached to any structure, allowing for additional dimensions.

1 x Structure 5 Panels 30-45mm Coplanar Falcat: support to allow the placement of 5 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.

1 x Growatt ARK XH 7.6kWh Lithium Battery: this group of high voltage batteries is suitable for self-consumption growth systems that can store overproduction. This 7.6kWh lithium battery has a long lifespan and an additional 2.5kWh module can be added to increase the capacity of the battery bank. It includes a base, three modules and a BMS controller to communicate with the Growatt MIN-XH inverter.

1 x Growatt Shine-Link X monitoring: used to establish the Internet connection to the inverters of the Growatt MIN-X range. With this device, Wi-Fi is not required, as the monitoring plugin consists of two components. A router with a base and internet connected to a socket, and an adapter connected to an inverter. An automatic connection is established between the two, making the inverter available to the Internet and allowing its operation to be monitored on the portal provided by the manufacturer.

1 x Growatt MOD 4000TL3-XH Hybrid Three-Phase Inverter: it is the perfect device for small self-consumption photovoltaic installations. Its design is compact, silent and easy to install, which makes it one of the best options on the market. It features two independent MPPT controllers and up to 4000W of power to ensure maximum efficiency from your solar system.

1 x Growatt TPM Three-Phase Wattmeter: you can know exactly the power consumption of your photovoltaic system. The meter sends this data via Modbus protocol to a grid-connected inverter, which determines whether to limit power based on current consumption in the home. You can also avoid feeding too much power into your network, if necessary. It provides data such as the energy produced and required in the home.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Single Wire Cable 6mm2 H1Z2Z2-K 20m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

2 x WEIDMULLER PVStick Connectors - Most recommended if you don't have crimp tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and do not require tools to connect to the cable.

The Huawei 4000W 20000Whdia Self-Consumption Kit, a very low-cost, high-performance self-consumption system.

Characteristics of the Huawei 4000W 20000Whdia Self-consumption Kit system

The photovoltaic system provided in the attached file can generate 12.29 kWh per day in winter (3 hours of sunshine) and 28.67kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 4,095 W
• Maximum output power to housing: 4000W
• Daily production in winter: 12.29 kWh
• Summer: daily production: 28.67 kWh
• Annual average daily production: 20.48 kWh

Components of the Huawei 4000W 20000Whdia Self-consumption Kit

9 x 455W JA Solar Mono PERC Solar Panel: guaranteed for 25 years and made of monocrystalline silicon from the famous international brand JA Solar. It offers one of the best products for our photovoltaic systems, as it is one of the best-performing monocrystalline models with excellent value for money. It can supply the solar system with about 1,350 Wh per day in winter and almost twice as much in summer. PERC technology with high performance monocrystalline half cells offers more than 20% efficiency for the size of the module. It measures 2112 x 1052 x 35mm and includes a junction box for each positive and negative cable with MC4 connectors at each end. The solar module includes an attached aluminum frame that allows it to be attached to any structure, allowing for additional dimensions.

1 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.

1 x Structure 5 Panels 30-45mm Coplanar Falcat: support to allow the placement of 5 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Huawei Luna2000 5kWh Lithium Battery Module: a high-voltage energy storage module with a 10-year warranty and compatible with Huawei KTL-L1 and three-phase KTL-M1 single-phase inverters. A BMS is required on top for a complete system to exist and can be expanded with up to two units. 20, 25 or 30 kWh require an additional BMS module and a total of 4.5 or 6 battery modules. It has IP65 protection and has a total expanded capacity of up to 30 kWh for self-consumption systems using Huawei hybrid inverters.

1 x Huawei Luna2000 Lithium Battery BMS: a controller that acts as an interface between the inverter and the Huawei Luna battery. Compatible with Huawei KTL Single-Phase L1 Inverter and KTL Three-Phase M1 Inverter. This BMS sits on top of the battery and is used for systems from 5 to 15 kWh, depending on whether one to three battery modules are installed. 20, 25 or 30 kWh require additional BMS modules and a total of 4.5 or 6 battery modules. It has IP65 protection and an extended capacity of up to 30kWh for our self-consumption systems with Huawei hybrid inverters.

1 x Carlo Gavazzi EM112DIN Wattmeter: a device tuned to measure the amount of energy flowing through your home, optimizing the energy delivery of your inverter to the maximum to avoid feeding the grid or increase production according to your preferences You can control or in a self-consumption configuration. A very popular Carlo Gavazzi model that is widely compatible with many inverters on the market.

1 x Huawei SUN2000-4KTL-L1 4000W inverter: It has an output power of 4000W and is ready to use in grid connection installations. Lithium batteries can be added to store additional power for consumption during times of higher consumption than solar power and at night. It includes high-level features such as two MPPT trackers with very wide working ranges. It also includes support for a custom optimizer that prevents partial shadows, but it's perfect for being able to set two directions on the panel. Includes wireless communication, IP65 protection, 5-year manufacturer's warranty and more.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

2 x WEIDMULLER PVStick Connectors - Most recommended if you don't have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.

The Fronius 3000W 16kWhdia Hybrid Solar Kit, single-phase solar self-consumption system for private homes and small businesses.

Characteristics of the Fronius 3000W 16kWhdia Hybrid Solar Kit system

The photovoltaic system provided in the attached file can generate 9.56 kWh per day in winter (3 hours of sunshine) and 22.30 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 3,185 W
• Daily production in winter: 9.56 kWh
• Summer: daily production: 22.30 kWh
• Annual average daily production: 15.93 kWh

Components of the Fronius 3000W 16kWhdia Hybrid Solar Kit

7 x 455W JA Solar Mono PERC Solar Panel: guaranteed for 25 years and made of monocrystalline silicon from the famous international brand JA Solar. It offers one of the best products for our photovoltaic systems, as it is one of the best-performing monocrystalline models with excellent value for money. It can supply the solar system with about 1,350 Wh per day in winter and almost twice as much in summer. PERC technology with high performance monocrystalline half cells offers more than 20% efficiency for the size of the module. It measures 2112 x 1052 x 35mm and includes a junction box for each positive and negative cable with MC4 connectors at each end. The solar module includes an attached aluminum frame that allows it to be attached to any structure, allowing for additional dimensions.

2 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.

1 x Structure 3 Panels 30-45mm Coplanar Falcat: support to allow the placement of 3 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Structure 4 Panels 30-45mm Coplanar Falcat:support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x BYD BASE+BCU Lithium Battery for HVS and HVM: it is the control unit and an essential component of the Battery-Box Premium HVS and HVM high-voltage modular batteries. This HVS or HVM requires this BMS and between 2 and 5 HVS modules or between 3 and 8 modules of the HVM model. The base for stacking the modules on top is also included.

2 x BYD Lithium Battery Premium HVS Module 2.55kWh: it is a cobalt-free lithium ferrophosphate battery module compatible with many self-consumption photovoltaic systems. The HVS system consists of a minimum of 2 and a maximum of 5 of these modules in a tower, with the optimal storage capacity for our needs. Each HVS module has a capacity of 2.56 kWh and a nominal operating voltage of 102.4 V. With no series connection or wiring between modules, HVS systems are classified as high voltage systems and require a controller or BMS to communicate with the investor.

1 x FRONIUS Primo GEN24 3kW Hybrid Inverter: state-of-the-art hybrid inverter. For single-phase applications connected to the network, with the option of connecting a battery to accumulate extra self-consumption. Some of its most notable features are: Emergency power supply in case of mains failure (with or without battery), 2 MPPT trackers, 97% maximum performance, and all with online monitoring by the Fronius platform. Maximum reliability and durability.

1 x Fronius Smart Meter Single-Phase TS 100A: this helps control the supply to the electricity grid and comply with Spanish regulations. This system allows you to adjust the output power of the inverter. In this way, the meter sends appropriate signals to the inverter to control the energy that feeds the electrical system. Together with the inverter, this smart meter connects to the internet through a Wi-Fi or cable network to monitor the facilities, access consumption and production data in real time, and track the history of what is generated and consumed until the date. You can check the existing history. This smart meter comes with a 5-year warranty that can be extended to 7 or 10 years.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

2 x Unifilar Cable 16 mm2 SOLAR PV ZZ-F Red: special for electrical installations. Halogen free power cable. It is a flexible power cable designed to meet the most demanding industrial needs.

2 x Unifilar Cable 16 mm2 SOLAR PV ZZ-F Black: special for electrical installations. Halogen free power cable. It is a flexible power cable designed to meet the most demanding industrial needs.

2 x 16 mm2 H07Z1-K (AS) Earth single-wire cable: the 16 mm2 H07Z1-K (AS) grounded solid cable is suitable for installation in homes, installations, offices, electrical panels, domestic and industrial lighting. In other words, it is an application that requires low generation of smoke and toxic gases in the event of a fire. Appropriate methods for installation include pipe, conduit, enclosed, surface, or recessed raceways. In addition, it can be installed in the normal temperature range as internal wiring of electrical equipment and mechanisms.

5 x Category 6 UTP Twisted Cable: unshielded twisted pair cable for transmission at frequencies up to 250MHz. Effectively supporting 1 Gigabit Ethernet speed, this cable operates at frequencies up to 250 MHz.

1 x WEIDMULLER PVStick Connectors - Most recommended if you don't have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.