Brackets for the Pylontech US3000 48V lithium battery allow safe connection of the modules.

The brackets for the Pylontech 3.5kWh US3000 48V lithium battery allow the safe connection of the 3.5kWh Pylontech US3000 48V lithium battery modules with the necessary space for ventilation between the modules and correct fixation. The Pylontech 3.5kWh US3000 48V brackets are mandatory whenever a rack cabinet is not available for this battery model.

Description Brackets Pylontech 3.5kWh US3000 Plus 48V
The Pylontech 3.5kWh US3000 Plus 48V brackets allow the attachment of the 3.5kWh Pylontech US3000 48V lithium batteries when connected in parallel to increase the system capacity.

The Pylontech 3.5kWh US3000 Plus 48V brackets replace the Pylontech battery rack, since the objective of both products is the correct fixation of the batteries, the facilitation of the relevant connections and optimal ventilation between them, since the installation of the batteries Lithium without a rack or special brackets for the model, that battery model can generate strong overheating that can lead to fatal consequences. For your safety and for the integrity of the AutoSolar system, it requires that the Pylontech lithium batteries be installed either within a rack compatible with the model or with the Pylontech 3.5kWh US3000 Plus 48V brackets.

Installation of the Pylontech 3.5kWh US3000 Plus 48V Brackets
The installation of the Pylontech 3.5kWh US3000 Plus 48V Brackets is simple and can be carried out by someone with basic knowledge in this regard, although it is advisable to take into account the considerable weight of the Pylontech US3000 48V modules.

To carry out the installation correctly, first the screws on the side of the Pylontech US3000 48V batteries must be removed, then the bracket must be inserted and finally screwed into the holes located on the side parts. Each battery must be installed with a front bracket and a rear bracket on which the installed Pylontech modules will rest thanks to the rubber pads that the brackets incorporate.

Connection of the Pylontech 2.5kWh US3000 48V Batteries with the Brackets
The manufacturer recommends that the brackets be used to connect a maximum of 4 batteries horizontally and two vertically as shown in the image. If you are interested in connecting more units, it is recommended that you opt for a rack.