The Permanent Home Solar Kit 10000W 48V 32000Whdia with OPzS battery, a system that covers the self-consumption of the permanent home.

Characteristics of the Solar Kit Permanent Housing System 10000W 48V 32000Whdia with OPzS battery

The photovoltaic system proposed in the annex can generate 24.00 kWh per day (3 hours of sun) in winter and 56.00 kWh per day (7 hours of sun) in summer.

The recommended system characteristics are as follows.

• Installed solar generation: 8,000W
• Daily production in winter: 24.00 kWh
• Summer daily production: 56.00 kWh
• Average annual production: 40.00 kWh
   

Components of the Permanent Housing Solar Kit 10000W 48V 32000Whdia with OPzS battery

16 x Solar Panel 500W Deep Blue 3.0 JA Solar: It has some very special features. It contains a half cell that provides a very high level of efficiency at 500W of power. It uses PERC technology and is made by the world-famous manufacturer JA Solar. The 500W Deep Blue Solar Panel is a JA Solar brand panel, one of the best manufacturers seen in the industry today. This range has PERC-type monocrystalline cells that give the panels magnificent technical properties. These cells offer the potential for higher productivity and efficiency than regular panels with the same number of cells.

2 x Must Solar 5000W 48V MPPT 80A Inverter Charger: provides a very convenient solution for isolated solar power systems, as all system components can be integrated into the same device. You can see how power is flowing in addition to battery voltage and state of charge, real-time solar panel input amperage and battery output amperage, and a small graph on the same screen. When we leave the support generators we can have. The output power of the inverter is 5000W, the maximum load of the battery charger is 60A, and it integrates an 80A MPPT Maximizer charge controller to connect the panel up to 4000W. After the thirteenth solar panel, the additional installation of a charge controller is required.

2 x Must Solar Inverter Parallel Connection Kit: parallel connection is possible with these compatible models.

24 x OPzS 1256Ah 2V Formula Star Solar Battery: depending on the depth of discharge, they have an average useful life of more than 2500 cycles, understanding a cycle as a complete process of charging and discharging the battery. In general, it is strongly recommended not to discharge the battery more than 30% of its full capacity. This will extend the life of the battery to more than 15 years of use. It is a battery model with minimal maintenance as. B. Periodic check of electrolyte level. Made in Europe, Formula Star batteries offer great value for money.

4 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

2 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.

2 x Victron 600A 8P Busbar + cover: A high current switchgear that also provides connectivity to batteries and/or DC devices. 600A model with 8 high current connections.

2 x Waterproof Box 150×110×70mm: ideal for installing the Legrand energy distributor inside. Both 40A and 100A are available for large installations.

2 × 100A Module Parallel Connection Splitter: perfect for connecting the cables coming out of your solar panels to a splitter. From this point on, only two wires (one positive and one negative) can go to the charge controller. Get significant savings on cable meters.

6 x WEIDMULLER PVStick Connectors – Most recommended if you don't have crimp tools that can connect regular MC4 connectors. They are compatible with all connector models that come standard with solar panels and do not require tools to connect to the cable.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

60 x Single Wire Cable 16 mm2 SOLAR PV ZZ-F Red: special for electrical installations. Halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial needs.

60 x Single Wire Cable 16 mm2 SOLAR PV ZZ-F Black: special for electrical installations. Halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial needs.

4 x Single Wire Cable 50 mm2 POWERFLEX RV-K Red: special for electrical installations. Halogen-free power cable. It is a flexible power cable designed for the most demanding industrial needs, such as: low voltage industrial connections, urban networks, building installations.

4 x Single Wire Cable 50 mm2 POWERFLEX RV-K Black: special for electrical installations. Halogen-free power cable. It is a flexible power cable designed for the most demanding industrial needs, such as: low voltage industrial connections, urban networks, building installations.

2 × 95 mm2 single-wire cable POWERFLEX RZ1-K “green”: these are cables that carry electricity from the battery to the solar inverter. Single core cables are used because the current transmitted between these devices can be very high and can overheat if the wrong cable is used. A PVC jacketed cable that covers all your needs. Due to their great flexibility, they are suitable for complex installations and can even be installed in wet and dry areas without compromising their useful life.

4 x 50mm Cable Eye Terminal - 8mm Eye: used to crimp 50mm gauge cables and connect 8mm diameter bolts.

4 x 50mm Cable Eye Terminal - 10mm Eye: used to crimp 50mm gauge cables and connect 10mm diameter screws.

4 x Eye Terminal – Cable 95mm, eye 10mm: used to crimp 10mm cables and connect 10mm diameter screws.