Structure 4 Panels 60c 30º Inclined Falcat is a support to be able to place the solar panels on a roof without inclination.
Concrete blocks not included.
The Falcat 4 Panel 60c 30º Inclined Structure is a support to be able to place the solar panels on a roof without inclination. The panels are placed vertically on the structure with an inclination of 30º with respect to the surface to which it is installed. The legs are pre-assembled and closed triangles with a large support surface that allows them to be anchored to the metal purlins of a sheet metal roof. In this case, the structure is designed for panels of 60 cells or that do not exceed a maximum height of 1.75 m.
Description Structure 4 Panels 60c 30º Inclined Falcat
The design of this structure serves to support solar panels on a flat surface that does not have the appropriate inclination or orientation. This model is suitable for any type of panel that has a maximum width of 1.10 meters and a maximum length of 1.75 m. In this case, the structure is designed for panels of 60 cells or that do not exceed a maximum height of 1.75 m. The legs are pre-assembled closed triangles that guarantee superior robustness. The support surface is very long so that it can be easily anchored if installed on a sheet metal cover to the straps that support the roof.
This inclined Falcat structure is designed to be installed in the orientation of most interest, always having the panels vertically. The row of panels will have a standard inclination of 30º with respect to the surface on which the structure is anchored.
Structure Materials 4 Panels 60c 30º Inclined Falcat
The materials with which this structure has been manufactured are 6005 T5 anodized aluminum and 304 stainless steel. The anchoring hardware where it will be installed is not included. Depending on the surface on which it is installed (concrete, metal roof, etc.), you will need one type of screws or another that you must purchase on your own.
It must be taken into account that in addition to the weight, the surface where the installation is carried out will also have to withstand the stresses caused by the wind. It is your responsibility to ensure that it is installed in a safe and solid location. The advantage of the structure is the speed with which the structure can be installed, since the triangles are pre-assembled and do not require special tools (only a wrench or pipe wrench and whatever you need to anchor the structure to the surface where it is installed. ).
Anodized aluminum 6005 T5 is a high-strength aluminum alloy, and due to its ability to be anodized, it is used to make structural profiles. All the structures present can be offered in anodized aluminum, whose advantage over raw aluminum structures is greater resistance to corrosion.
The packaging of the structure is unitary for structures of up to 6 units, so if you buy a structure for more than 6 panels you will receive 2 structures as well as a joining kit to join them in a single row. Along with the structure you will also receive a detailed assembly drawing so that you can easily install it.
