100 / 50Ah 12-24v Victron Smartsolar Mppt Solar Regulator

Product no.: VICTRON-100/70

Old price 230.00 €

173.00 €

Tax included and free shipment to spain

Description

With the Victron Smartsolar Mppt Solar Regulator of 100 / 50Ah of 12-24v it has continuous / peak charging current of 50A.

The Victron Smartsolar 100 / 50Ah 12-24v Mppt Solar Regulator has an ultra fast monitoring of the maximum power point of the photovoltaic panels to get the maximum daily production from your solar installation. It allows the connection of 2 panels in series of up to 72 cells and can operate 24 volt panels in 12 volt systems. The victron 100 50Ah mppt regulator can carry a maximum of 700w of panels in 12 volt systems and 1400w in 24 volt systems.

Advantages of a Victron Smartsolar 100 / 50Ah 12-24v Mppt Solar Regulator
On the market there are two types of regulators, maximizers or mppt like victron 100/50 and there are also so-called pwm (pulse width modulation). Mppt regulators have many advantages over pwm and are the recommended option as long as the budget allows.

In the first place, an mppt regulator allows the series connection of panels, that is, we can enter the regulator at a voltage higher than that of the battery. In this victron 50Ah regulator we have a maximum of 100 volts in open circuit of photovoltaic input, so for example in a 24 volt system we can connect two 200w 72-cell panels in series. By being able to enter a higher voltage, we facilitate series connection by reducing the wiring section and minimizing losses due to voltage drop.
Secondly, with an mppt regulator we obtain more production than with a pwm, the mppt takes advantage of 100% of what the photovoltaic panel produces, obtaining yields of up to 30% higher than pwm. With fewer panels we obtain the same performance as with a pwm regulator and more panels, so the higher investment of the mppt is justified by lowering the investment in the photovoltaic panel. For example, 8 300w panels with a pwm dimmer will perform roughly the same as 6 300w panels with a mppt dimmer.
Thirdly, we have that the mppt charges more on cloudy days since by connecting panels in series and entering a higher voltage, on cloudy days the mppt will charge earlier thanks to the fact that it will always have enough voltage to exceed that of the battery . In an mppt regulator like the victron we enter 60 or 75 volts, if it is cloudy we can go down to 40-50v, which is higher than the 24 volts of the system and therefore will contribute the load produced by the panels. In the pwm we enter 35 volts, so if it is cloudy we can have less than 24 volts at certain times and we cannot exceed the battery voltage and therefore charge.

Screen for Victron Smartsolar 100 / 50Ah 12-24v Mppt Solar Regulator

There is the possibility of adding an external screen to all victron Smartsolar mppt regulators such as 75/15, 100/15, 100/50, 150/45, 150/60 ... thanks to V.E direct communication. The screen is recessed and with it you can view battery voltages, load watts, load amps among other parameters and also configure the regulators for each type of battery. Screen for victron blue solar regulators.

Main characteristics of the victron Smartsolar mppt 100 / 50Ah regulator

Battery voltage: 12/24 V Automatic selection.
Maximum battery current: 50 A.
Maximum PV power, 12V 1a, b) 700 W (MPPT range 15 V to 90 V) Maximum PV power, 24 1a, b) 1400 W (MPPT range 30 V to 90 V).
Maximum PV open circuit voltage: 100 V.
Peak efficiency: 98%.
Own consumption: 10 mA.
Voltage in charge "Absorption": 14.4 V / 28.8 V 'Float' charge voltage: 13.8 V / 27.6 V.
Charging algorithm: multi-stage adaptation.
Temperature compensation: -16 mV / ° C respectively. -32 MV / ° C.
Continuous / Peak Charge Current: 50A / 58A.
Low voltage load shedding: 11.1V / 22.2V or 12V / 24V or BatteryLife algorithm.
Low voltage charge reconnection: 13.1V / 26.2V or 14V / 28V or BatteryLife algorithm.
Protection against: Reverse polarity of the battery (fuse), Output short circuit, Overtemperature, Operating temperature -30 to +60 ° C (full power rating up to 40 ° C) 100% humidity, non-condensing.