The Ja Solar 460W 24V Monocrystalline Perc Panel offers great power for our photovoltaic solar system thanks to PERC technology.

Details of JA Solar Panel 460W 24V Monocrystalline Perc

The JA Solar 460W 24V Monocrystalline Perc Panel is a high-power photovoltaic module from the international manufacturer JA Solar. The JAM72S20 MR range is a series that offers the latest technology with very good technical characteristics.

One of its most outstanding features is its PERC-type monocrystalline half cells that offer superior production and better thermal performance. Its greater efficiency results in a higher production with practically the same capture surface as a normal 72-cell panel.

All the manufacturing technologies of this panel allow an efficiency of up to approximately 20.7% to be obtained. The progressive improvement in the efficiency of the cells results in higher powers and all with a very similar external appearance with hardly any increase in size.

JA Solar is a large company in the photovoltaic sector, with more than 15 years of history producing panels and more than 20,000 employees. It is a world leading manufacturer and therefore appears in all Tier 1 reports for its high production capacity and great recognition and settlement within the photovoltaic sector.

JA Solar, in addition to assembling the modules, is also a manufacturer of photovoltaic cells for all types of ranges, including premium models with the latest technology. In its wide range of models, it offers this family of panels with great performance and top-level features.

Its monocrystalline PERC half cells are arranged in two groups to maximize shade tolerance and minimize performance impact. It incorporates a high capture bus technology, using up to 9 buses that run through all the cells to cause fewer hot spots and less shadowing on the cell surface.

With all this, JA Solar panels have a very favorable value for money, since they incorporate premium solar panel technologies at a very good price.

The electrical characteristics of the JA Solar 460W 24V Monocrystalline Perc Panel are first class, as evidenced by its 20.2% module efficiency. The JA Solar Panel 460W 24V Monocrystalline Perc offers the following production data:

- Peak Power (PMAX): 460W

- Voltage at maximum power (VMPP): 42.13V

- Intensity at maximum power (IMPP): 10.92A

- Open Circuit Voltage (VOC): 50.01V

- Short-circuit current (ISC): 11.45A

These production data are under standard irradiation conditions of 1000W/m², at a cell temperature of 25ºC and with an air mass of 1.5AM. The tolerance of the output power is ± 5W.

The JA Solar Panel 460W 24V Monocrystalline Perc undergoes strict quality controls to guarantee its durability and production throughout its useful life.

It offers a 12-year mechanical guarantee against manufacturing defects and a 25-year guarantee of at least 80% of its nominal power when it was new. It has the international certifications required in the sector, and thanks to this it can be installed in any photovoltaic solar system.

Each JA Solar panel, with half cell technology, and incorporates a total of 144 units. In its rear part it has 3 watertight boxes. From the ones at the ends, the cables come out with the positive and negative terminals respectively. Inside its central junction box are the bypass diodes.

Characteristics of the JA Solar Panel 460W 24V Monocrystalline Perc

The JA Solar 460W 24V Monocrystalline Perc Panel is slightly larger than a standard 24V panel and is usual in this power environment, given that its composition of slightly larger half-cells organized in two groups requires additional space in its distribution .

It measures 2120 x 1052 x 35 mm, and weighs about 25Kg. The panel frame is made of anodized aluminum. It gives it high resistance so that it can be anchored to the structure on which the panel is placed and thus also prevent the module from torsion to ensure its integrity.

JA Solar Panel Installation 460W 24V Monocrystalline Perc

The orientation and inclination is extremely important to achieve maximum solar production. The solar panel must be installed in an optimal position to maximize its production throughout the day and throughout the year. There should be no shadows on the solar panel to ensure its maximum production throughout all hours of sunlight.

This module, due to its dimensions, may not be compatible with the standard width of panel structures and may require an extension to allow its correct installation.

Consult us so that we can advise you on the structure you need to know if you need or not you need the complement for additional width.