The Tensite 6V 600Ah GEL Battery is a sealed GEL technology monobloc battery that does not require maintenance.

Description of the 6V 600Ah Tensite GEL Battery

The 6V 600Ah Tensite GEL battery is a gel battery made up of flat lead plates that provide high performance and long life. The battery is specially designed for the solar energy sector, specifically for photovoltaic solar energy.

Also, being a deep cycle accumulator, it is made of durable materials that provide optimal performance and guaranteed operation over time. It is double insulated on its positive plate, which reduces the likelihood of separator cracking or delineation, but also protects it from bifurcations or shorts on the bottom or sides.

All its cells are internally separated and do not require any type of maintenance, so that we will not have to fill with electrolyte or carry out equalization charges. The way it is manufactured offers us a long service life and excellent performance at a much lower price than the rest of the 2V stationary batteries in exchange for a slightly shorter duration. The useful life of the 6V 600Ah Tensite GEL Battery lasts between eight and ten years.

In addition, all its cells are internally separated and do not require any type of maintenance, so there is no need to recharge electrolytes or make equalization charges.

The way it's built gives us a longer life and great performance at a much lower price than other 2V stationary batteries, but with a slightly shorter lifespan. Approximately, this battery has a useful life of eight to ten years.

Characteristics of the GEL 6V 600Ah Tensite Battery

The 6V 600Ah Tensite GEL Battery has dimensions of around 300 mm wide, 410 mm high, including the terminals and a depth of approximately 180 mm. The weight of the battery is almost 57 kg, so we recommend having the necessary means for its transport and handling.

The duration of the battery is directly linked to the depth of the downloads that we make of it. Next, in the curve you will be able to see, according to the information provided by the manufacturer, the duration of the model depending on the discharge cycles that we proceed.

Installation of the GEL 6V 600Ah Tensite Battery

We do not need many specifications when installing our Tensite batteries, since they do not require large ventilation spaces because their operation is completely sealed and does not emit gases. They can be connected in remote locations, as they do not require maintenance.

In addition, to install them does not require great skills or abilities, we only need a wrench or a pipe wrench to be able to hold the cables that connect the nuts that are also included.

We can place it directly on the ground or on a flat and smooth surface, if special anchors are not needed to hold it, due to its robustness it ensures the rigidity of the battery and it is very difficult for it to bulge on the sides.

We recommend that Tensite 6V 600Ah GEL Batteries be installed in areas away from direct sunlight, as well as extreme hot or cold temperatures, to avoid damage that affects performance and reduces battery life.

Maintenance of the GEL 6V 600Ah Tensite Battery

Due to its composition and manufacturing method, this battery does not require maintenance, we only have to verify that the terminals are tight. We just have to check that the battery terminals are clean, that they have good electrical contact and that they are not loose due to changes in temperature or metal tension.

It is necessary for the battery to reach its maximum energy level every so often. We don't have to completely deplete the battery capacity. We recommend a discharge depth of around 10% with a maximum limit of 60%. In this way, the duration will be established by the manufacturer.