Stationary accumulator 1x6 elements 1.100A (C100) - TYS-7 of Enersys. For isolated photovoltaic installations.

1. 2V elements for isolated photovoltaic installations
2. Acid Lead Technology
3. 1.100 amperes capacity (C100)
4. Accumulators available with either the added electrolyte or dry charged
5. Up to 5000 cycles with a discharge depth of 25%
6. Excellent operational safety that includes: Fully insulated connections, explosion-proof plug for each cell, protection of the terminals for transport
7. The range of Elements of 2V EcoSafe TS of EnerSys offers a solution of high performance and long duration for photovoltaic installations and applications of renewable energies.

The EcoSafe TS cells are based on conventional technology, 2V open acid Pb elements and are designed for photovoltaic installations and renewable energy applications where a long life cycle is required with maximum reliability. They are especially indicated for use in solar installations, since they ensure a continuity of the electrical supply during the hours of darkness or during periods of low sunlight.

Its maintenance is reduced due to the use of an additional reserve of electrolyte, which means that the cells only have to be refilled once a year. This helps reduce maintenance costs and makes them an ideal solution for many isolated locations or that do not require supervision.

Positive tubular plates are normally used in accumulators for the most demanding applications. In the TS range they have been optimized to offer a maximum cycle length and also a greater capacity.

Stationary accumulator 1x6 elements 1.200A (C100) - TYS-8. For isolated photovoltaic installations.

1. 2V elements for isolated photovoltaic installations
2. Acid Lead Technology
3. 1.200 A capacity (C100)
4. Accumulators available with either the added electrolyte or dry charged
5. Up to 5000 cycles with a discharge depth of 25%
6. Excellent operational safety that includes: Fully insulated connections, explosion-proof plug for each cell, protection of the terminals for transport
7. The range of Elements of 2V EcoSafe TS of EnerSys offers a solution of high performance and long duration for photovoltaic installations and applications of renewable energies.

The EcoSafe TS cells are based on conventional technology, 2V open acid Pb elements and are designed for photovoltaic installations and renewable energy applications where a long life cycle is required with maximum reliability. They are especially indicated for use in solar installations, since they ensure a continuity of the electrical supply during the hours of darkness or during periods of low sunlight.

Its maintenance is reduced due to the use of an additional reserve of electrolyte, which means that the cells only have to be refilled once a year. This helps reduce maintenance costs and makes them an ideal solution for many isolated locations or that do not require supervision.

Positive tubular plates are normally used in accumulators for the most demanding applications. In the TS range they have been optimized to offer a maximum cycle length and also a greater capacity.

Stationary accumulator 1x6 elements 1.400A (C100) - TYS-9. For isolated photovoltaic installations.

1. 2V elements for isolated photovoltaic installations
2. Acid Lead Technology
3. 1.400 A capacity (C100)
4. Accumulators available with either the added electrolyte or dry charged
5. Up to 5000 cycles with a discharge depth of 25%
6. Excellent operational safety that includes: Fully insulated connections, explosion-proof plug for each cell, protection of the terminals for transport
7. The range of Elements of 2V EcoSafe TS of EnerSys offers a solution of high performance and long duration for photovoltaic installations and applications of renewable energies.

The EcoSafe TS cells are based on conventional technology, 2V open acid Pb elements and are designed for photovoltaic installations and renewable energy applications where a long life cycle is required with maximum reliability. They are especially indicated for use in solar installations, since they ensure a continuity of the electrical supply during the hours of darkness or during periods of low sunlight.

Its maintenance is reduced due to the use of an additional reserve of electrolyte, which means that the cells only have to be refilled once a year. This helps reduce maintenance costs and makes them an ideal solution for many isolated locations or that do not require supervision.

Positive tubular plates are normally used in accumulators for the most demanding applications. In the TS range they have been optimized to offer a maximum cycle length and also a greater capacity.

Stationary accumulator 1x6 elements 1.500A (C100) - TYS-10. For isolated photovoltaic installations.

1. 2V elements for isolated photovoltaic installations
2. Acid Lead Technology
3. 1.500 A capacity (C100)
4. Accumulators available with either the added electrolyte or dry charged
5. Up to 5000 cycles with a discharge depth of 25%
6. Excellent operational safety that includes: Fully insulated connections, explosion-proof plug for each cell, protection of the terminals for transport
7. The range of Elements of 2V EcoSafe TS of EnerSys offers a solution of high performance and long duration for photovoltaic installations and applications of renewable energies.

The EcoSafe TS cells are based on conventional technology, 2V open acid Pb elements and are designed for photovoltaic installations and renewable energy applications where a long life cycle is required with maximum reliability. They are especially indicated for use in solar installations, since they ensure a continuity of the electrical supply during the hours of darkness or during periods of low sunlight.

Its maintenance is reduced due to the use of an additional reserve of electrolyte, which means that the cells only have to be refilled once a year. This helps reduce maintenance costs and makes them an ideal solution for many isolated locations or that do not require supervision.

Positive tubular plates are normally used in accumulators for the most demanding applications. In the TS range they have been optimized to offer a maximum cycle length and also a greater capacity.

Stationary accumulator 1x6 elements 1.800A (C100) - TYS-12. For isolated photovoltaic installations.

1. 2V elements for isolated photovoltaic installations
2. Acid Lead Technology
3. 1.800 A capacity (C100)
4. Accumulators available with either the added electrolyte or dry charged
5. Up to 5000 cycles with a discharge depth of 25%
6. Excellent operational safety that includes: Fully insulated connections, explosion-proof plug for each cell, protection of the terminals for transport
7. The range of Elements of 2V EcoSafe TS of EnerSys offers a solution of high performance and long duration for photovoltaic installations and applications of renewable energies.

The EcoSafe TS cells are based on conventional technology, 2V open acid Pb elements and are designed for photovoltaic installations and renewable energy applications where a long life cycle is required with maximum reliability. They are especially indicated for use in solar installations, since they ensure a continuity of the electrical supply during the hours of darkness or during periods of low sunlight.

Its maintenance is reduced due to the use of an additional reserve of electrolyte, which means that the cells only have to be refilled once a year. This helps reduce maintenance costs and makes them an ideal solution for many isolated locations or that do not require supervision.

Positive tubular plates are normally used in accumulators for the most demanding applications. In the TS range they have been optimized to offer a maximum cycle length and also a greater capacity.

Metal structure for ROPZS batteries to prevent this type of batteries from bulging.

The structure serves for 6 ROPZS vessels, if your installation of 24V will need two structures and if it is 48V you will need 4 structures.

The structure consists of:

• 2 Metal plates
• 2 threaded rods
• Nuts

The 6V 600Ah Tensite OPzS Stationary Battery is perfectly indicated for medium-sized photovoltaic installations.

The Stationary Battery 6V 600Ah Tensite OPzS contains tubular plates that offer a very high performance and at the best price. It is perfectly indicated for medium-sized photovoltaic installations. It is a battery with a long service life and excellent discharge characteristics. You can only find it at AutoSolar.

Characteristics of the Stationary Battery 6V 600Ah Tensite OPzS

The 6V 600Ah Tensite OPzS Stationary Battery differs from others due to its tubular plate construction that provides high performance and superior durability. It is a deep cycle battery with full performance guarantees.

It is manufactured with double insulated positive plates that eliminate the possibility of misalignment or cracks at standoffs, bifurcations, or shorts on the bottom or sides. Each cell has its respective electrolyte level that can be easily seen. Through each glass, which are in the upper part, we can fill with distilled water to carry out periodic maintenance. Tube sheets allow for long service life and excellent performance.

The dimensions of the battery are 343 x 178 x 426 mm and it weighs 55 kg, so it is advisable to have the necessary means for its handling and transport. Battery life is related to the depth of discharge. Below, you can see the information provided by the manufacturer.

Connection of Stationary Batteries 6V 600Ah Tensite OPzS

• To achieve a voltage of 12V with the 6V 600Ah Tensite OPzS stationary battery, two of them must be connected in series, as shown in the following image:

• Finally, in case you want to install a 48V bank, we will need 8 units connected in series as follows:

• Finally, in case you want to install a 48V bank, we will need 8 units connected in series as follows:

Installation of Stationary Battery 6V 600Ah Tensite OPzS

This battery is very easy to install so it can be located in remote places. No special skills or tools are necessary for installation and they can be placed on the ground without the need for metal anchors, however, from AutoSolar we always recommend that the installation be carried out by a professional.

It is important to install them in a well-ventilated location and away from direct sunlight and extreme temperatures to prevent functional damage.

Maintenance of the Stationary Battery 6V 600Ah Tensite OPzS

The 6V 600Ah Tensite OPzS Stationary Battery requires periodic maintenance due to its internal technology. It is a simple maintenance since it is only necessary to carry out a revision of the internal electrolyte and fill with distilled water. It is important that the battery is at its maximum energy charge level with a certain periodicity. The battery capacity must not be exhausted to the maximum and it is recommended that the depth of discharge range between 10 and 60% maximum. Thus the durability of the battery will be close to that stipulated by the manufacturer.

The Stationary Tensite OPZV 2V 1110Ah GEL Battery is a sealed tubular plate model and maintenance-free from the brand

This 1110Ah 2V OPzV Tensite battery model is intended for the supply of energy in photovoltaic, telecommunications installations, or in short, any installation that requires a reliable supply and that does not require any maintenance throughout its useful life.

What is the Stationary Tensite OPZV 2V 1110Ah GEL Battery for?

The Stationary Tensite OPZV 2V 1110Ah GEL Battery, in a solar installation, allows you to store the energy of the solar panels so that later through an inverter or directly to the consumptions to power our electrical devices.

Cycles of a Stationary 2V 1110Ah Tensite OPZV GEL Battery

A cycle of a Stationary Tensite OPZV 2V 1110Ah GEL Battery is a sequence of charging and discharging the battery. In the attached technical sheet and in the curve that appears at the bottom, you can check the life cycle curve of this battery based on the percentage of discharge to which we submit it.

Buy GEL Battery 2V 1110Ah Tensite OPZV Stationary

1110Ah 2V OPzV Tensite batteries are sold in sets of 6 units and multiples, a loose 2V unit will only be supplied when a loose glass from a previously supplied set breaks or malfunctions.

6 units of stationary battery 3 SOPzS390 of 385Ah with easy maintenance and long useful life for isolated solar installations.

The stationary batteries are manufactured with tubular positive plates, special lead alloy and sliding poles, they have an optimized design to store energy in residential areas with structured solar telecommunications installations.

The 3 SOPzS 390 stationary battery is indicated for the energy supply of isolated photovoltaic solar systems, small wind power, hybrid installations with a diesel generator, pumping systems, electrification, telecommunications and signaling, computers, emergency lighting, alarms, airports or navigation. maritime.

This battery is focused on renewable energy are a cost-effective and optimized solution, after extensive experience in the design of industrial batteries, which results in a combination of exceptional advantages.

Features

• Simple maintenance, easy and sporadic filling tasks.
• Long service life, the low concentration of antimony in the alloys make it possible to obtain unique advantages such as extending its periodic operation to a discharge depth of 60% with a service life of 2000 cycles at 20ºC.
• Reliability and performance.
• Optimized space, due to the optimized racks that seek flexibility and comfort in installation.
• Safety since they comply with the European and global operational regulations.
• Optimum total cost of ownership (TCO), cost efficiency per cycle, and long life.

Ficha Técnica

6 units 4 SOPzS493 493Ah stationary battery with simple maintenance and long service life for isolated solar installations.

The stationary batteries are manufactured with tubular positive plates, special lead alloy and sliding poles, they have an optimized design to store energy in residential areas with structured solar telecommunications installations.

The 4 SOPzS 500 stationary battery is indicated for the energy supply of isolated photovoltaic solar systems, small wind power, hybrid installations with a diesel generator, pumping systems, electrification, telecommunications and signaling, computers, emergency lighting, alarms, airports or navigation. maritime.

This battery is focused on renewable energy are a cost-effective and optimized solution, after extensive experience in the design of industrial batteries, which results in a combination of exceptional advantages.

Features

• Simple maintenance, easy and sporadic filling tasks.
• Long service life, the low concentration of antimony in the alloys make it possible to obtain unique advantages such as extending its periodic operation to a discharge depth of 60% with a service life of 2000 cycles at 20ºC.
• Reliability and performance.
• Optimized space, due to the optimized racks that seek flexibility and comfort in installation.
• Safety since they comply with the European and global operational regulations.
• Optimum total cost of ownership (TCO), cost efficiency per cycle, and long life.

Ficha Técnica