The Solar Pumping Kit for 1cv, a direct solar pumping system adapted to 230V three-phase pumps with a maximum power of 1cv.

Characteristics of the Solar Pumping Kit system for 1cv

The photovoltaic system provided in the attached file can generate 7.29 kWh per day in winter (3 hours of sunshine) and 17.01 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 2,430 W
• Daily production in winter: 7.29 kWh
• Summer: daily production: 17.01 kWh
• Annual average daily production: 12.15 kWh

Components of the Solar Pumping Kit for 1cv

6 × 405W Deep Blue 3.0 JA Solar Mono Solar Panel:  have very special properties. It contains a half cell that provides a very high level of efficiency with a power of 405W. Powered by PERC technology and supplied by world-renowned manufacturer JA Solar.

1 x Structure 6 Panels 30-45 mm Coplanar Falcat: support to allow the placement of 6 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x INVT BPD 1HP 0.75KW Solar Pumping Controller: This pump controller can be used for single-phase and three-phase pumps up to 1CV, perfect for running 230V water pumps. It has an LCD screen that allows you to check the operation of the pump. It also has an IP65 degree of protection.

1 x WEIDMULLER PVStick Connectors – Most recommended if you don't have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.

The Solar Pumping Kit for 1.5cv, a direct solar pumping system adapted to 230V three-phase pumps with a maximum power of 1.5cv.

Characteristics of the Solar Pumping Kit system for 1.5cv

The photovoltaic system provided in the attached file can generate 10.94 kWh per day in winter (3 hours of sunshine) and 25.52 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 3,645 W
• Daily production in winter: 10.94 kWh
• Summer: daily production: 25.52 kWh
• Annual average daily production: 18.23 kWh

Components of the Solar Pumping Kit for 1.5cv

9 × 405W Deep Blue 3.0 JA Solar Mono Solar Panel: have very special properties. It contains a half cell that provides a very high level of efficiency with a power of 405W. Powered by PERC technology and supplied by world-renowned manufacturer JA Solar.

1 x Structure 5 Panels 30-45mm Coplanar Falcat: support to allow the placement of 5 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x INVT BPD 2HP 1.5KW Solar Pumping Controller: This pump controller can be used for single-phase and three-phase pumps up to 2HP and is ideal for 230V water pumps. It has an LCD screen that allows you to check the operation of the pump. Includes IP65 degree of protection.

1 x WEIDMULLER PVStick Connectors – Most recommended if you don't have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.

The Solar Pumping Kit for 2cv, a direct solar pumping system adapted to 230V three-phase pumps with a maximum power of 2cv.

Characteristics of the Solar Pumping Kit system for 2cv

The photovoltaic system provided in the attached file can generate 12.15 kWh per day in winter (3 hours of sunshine) and 28.35 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 4,050 W
• Daily production in winter: 12.15 kWh
• Summer: daily production: 28.35 kWh
• Annual average daily production: 20.25 kWh

Components of the Solar Pumping Kit for 2cv

10 × 405W Deep Blue 3.0 JA Solar Mono Solar Panel: have very special properties. It contains a half cell that provides a very high level of efficiency with a power of 405W. Powered by PERC technology and supplied by world-renowned manufacturer JA Solar.

2 x Structure 5 Panels 30-45 mm Coplanar Falcat: support to allow the placement of 5 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Falcat Universal Union Kit up to 45mm: Contains all the necessary elements to join the solar panels when making a solar installation with structures. Specifically, this kit is made for joining 2 Falcat structures prepared for panels with a profile thickness of up to 45mm.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 30m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 30m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x INVT BPD 2HP 1,5KW Solar Pumping Controller: This pump controller can be used for single-phase and three-phase pumps up to 2CV, perfect for running 230V water pumps. It has an LCD screen that allows you to check the operation of the pump. It also has an IP65 degree of protection.

3 x WEIDMULLER PVStick Connectors - Most recommended if you don't have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.

1 x Parallel Connectors 2 PV Panels MC4 Flexible: They are the perfect complement to make a parallel connection of up to 2 panels in our solar installation.

The Solar Pumping Kit for 3cv, a direct solar pumping system adapted to 230V three-phase pumps with a maximum power of 3cv.

Characteristics of the Solar Pumping Kit system for 3cv

The photovoltaic system provided in the attached file can generate 17.01 kWh per day in winter (3 hours of sunshine) and 39.69 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 5,670 W
• Daily production in winter: 17.01 kWh
• Summer: daily production: 39.69 kWh
• Annual average daily production: 28.35kWh

Components of the Solar Pumping Kit for 3cv

14 x Solar Panel 405W Deep Blue 3.0 JA Solar Mono: they have very special properties. It contains a half cell that provides a very high level of efficiency with a power of 405W. Powered by PERC technology and supplied by world renowned manufacturer JA Solar.

2 x Structure 6 Panels 30-45mm Coplanar Falcat: structures of the same type using the appropriate connection kit. Support to allow the placement of 6 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple.

1 x Structure 2 Panels 30-45mm Coplanar Falcat: structures of the same type using the appropriate connection kit. Support to allow the placement of 2 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple.

1 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 30m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 30m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x INVT BPD 3HP 2.2KW Solar Pump Controller: This pump controller can be used for single-phase and three-phase pumps up to 2HP and is ideal for 230V water pumps. It has an LCD screen that allows you to check the operation of the pump. Includes IP65 degree of protection.

3 x WEIDMULLER PVStick Connectors – Most recommended if you don't have crimping tools that can connect regular MC4 connectors. They are compatible with all connector models that come standard with solar panels and do not require tools to connect to the cable.

1 x Parallel Connectors 2 Flexible MC4 PV Panels: ideal for connecting up to 2 modules in parallel in a photovoltaic system.

The Solar Pumping Kit for 4cv, a direct solar pumping system adapted to 230V three-phase pumps with a maximum power of 4cv.

Characteristics of the Solar Pumping Kit system for 4cv

The photovoltaic system provided in the attached file can generate 21.87 kWh per day in winter (3 hours of sunshine) and 51.03 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 7,290 W
• Daily production in winter: 21.87 kWh
• Summer: daily production: 51.03 kWh
• Annual average daily production: 36.45 kWh

Components of the Solar Pumping Kit for 4cv

18 × 405W Deep Blue 3.0 JA Solar Mono Solar Panel: have very special properties. It contains a half cell that provides a very high level of efficiency with a power of 405W. Powered by PERC technology and supplied by world-renowned manufacturer JA Solar.

3 x Structure 6 Panels 30-45 mm Coplanar Falcat: support to allow the placement of 6 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

2 x Falcat Universal Union Kit up to 45mm: Contains all the necessary elements to join the solar panels when making a solar installation with structures. Specifically, this kit is made for joining 2 Falcat structures prepared for panels with a profile thickness of up to 45mm.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 30m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 30m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x INVT BPD 5.5HP 4KW Solar Pumping Controller: This pump controller can be used for single-phase and three-phase pumps up to 5.5CV, perfect for running 230V water pumps. It has an LCD screen that allows you to check the operation of the pump. It also has an IP65 degree of protection.

3 x WEIDMULLER PVStick Connectors – Most recommended if you don't have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.

1 x Parallel Connectors 2 PV Panels MC4 Flexible: They are the perfect complement to make a parallel connection of up to 2 panels in our solar installation.

The Solar Pumping Kit for 5.5cv, a direct solar pumping system adapted to 230V three-phase pumps with a maximum power of 5.5cv.

Characteristics of the Solar Pumping Kit system for 5.5cv

The photovoltaic system provided in the attached file can generate 26.73 kWh per day in winter (3 hours of sunshine) and 62.37 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 8,910 W
• Daily production in winter: 26.73 kWh
• Summer: daily production: 62.37 kWh
• Annual average daily production: 44.55 kWh

Components of the Solar Pumping Kit for 5.5cv

22 × 405W Deep Blue 3.0 JA Solar Mono Solar Panel: have very special properties. It contains a half cell that provides a very high level of efficiency with a power of 405W. Powered by PERC technology and supplied by world-renowned manufacturer JA Solar.

2 x Structure 6 Panels 30-45 mm Coplanar Falcat: support to allow the placement of 6 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

2 x Structure 5 Panels 30-45 mm Coplanar Falcat: support to allow the placement of 5 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

3 x Falcat Universal Union Kit up to 45mm: Contains all the necessary elements to join the solar panels when making a solar installation with structures. Specifically, this kit is made for joining 2 Falcat structures prepared for panels with a profile thickness of up to 45mm.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 60m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 60m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x INVT BPD 5.5HP 4KW Solar Pumping Controller: This pump controller can be used for single-phase and three-phase pumps up to 5.5CV, perfect for running 230V water pumps. It has an LCD screen that allows you to check the operation of the pump. It also has an IP65 degree of protection.

4 x WEIDMULLER PVStick Connectors - Most recommended if you don't have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.

1 x Parallel Connectors 3 Flexible PV Panels MC4: they are the perfect complement to connect to 3 panels in our photovoltaic installation.

With the 230V single or three-phase 0.5hp solar pumping kit you can run a pump at its maximum performance in the summer months.

This direct solar pumping kit without batteries is valid to operate a single-phase or three-phase 230v pump of up to 0.5hp and with a generator or light input to power the system even on cloudy days. The direct solar pumping kit allows operation with only 3 solar panels thanks to its internal voltage booster. Up to 6 hours a day at 50Hz of operation.

The solar kit for pumping up to 0.5 hp works as follows:

The solar pumping kit for single-phase or three-phase 230v pumps up to 0.5hp allows the use of energy from solar panels to operate a pump of up to 0.5hp. The INVT 0.75hp pumping panel starts and operates the pump when solar energy is available.
Using this direct solar pumping kit we can run a 0.5 hp pump for up to 6 hours a day in summer months at full 50Hz performance. Calculated for a central area of ​​Spain.

Direct solar pumping kit is expandable
With this direct solar pumping kit we can add more solar panels if we want to increase the hours of irrigation or use of the pump. Using 2 more panels we can reach 9 hours of daily operation at 50Hz. The pumping panel allows the use of pumps up to 0.75kw.

Components of the solar kit for direct pumping up to 0.5 hp

• 3 solar panels 340w PERC CSUN: It is a high efficiency polycrystalline solar panel, it has a high transmission of electricity thanks to its 5 bus bar connections in the cells. The PERC cells of the module are a dielectric layer that allows to take advantage of radiation that before it ended in the last layer of aluminum of the panel. By taking advantage of it to increase power, we reduce the heat that is transmitted to this last layer in a conventional cell and improve performance. CSUN is a TIER 1 manufacturer with a high quality in the production processes of its solar panels.
• Invert 0.75cv pump controller: It is a control panel for single-phase and three-phase 230v pumps with a maximum power of 0.75cv). It has a screen for viewing and adjusting the pumping parameters, it also has different inputs for well probes to stop and start the pump depending on the level conditions. It has an input to use an alternative source such as a generator or 230v light.
• Structure for 3 panels 30º floor or roof: In the kit we include an aluminum structure for photovoltaic modules with 30º inclination prepared to be installed on the ground or in metal sandwich-type roofs. The structure comes with all the hardware for assembly and the instruction manual with a detailed plan.
• Solar wiring and connectors: The kit includes 20 meters of 6mm unipolar RV-K solar cable for connecting the panels to the controller and the pump, as well as a set of easy-to-mount Pv stick mc weidmuller connectors.

With the 230v single-phase or three-phase solar pumping equipment, a 0.75 hp pump will work up to 6 hours a day in summer.

Direct solar pumping equipment without batteries. Valid to operate a pump up to 0.75cv single-phase or three-phase 230v and with generator or light input to power the system also on cloudy days. The direct solar pumping kit allows operation with only 4 solar panels thanks to its internal voltage booster. Up to 5 hours a day at 50Hz of operation.

Operation of the solar pumping kit up to 0.75 hp

• The solar pumping kit for single-phase or three-phase 230v pumps up to 0.75hp allows the use of energy from solar panels to operate a pump of up to 0.75hp. The INVT 0.75hp pumping panel starts and operates the pump when solar energy is available.
• Through this direct solar pump kit we can run a 0.75 hp pump for up to 6 hours a day in summer months at full 50Hz performance. Calculated for a central area of ​​Spain.

Direct solar pumping kit is expandable
With this direct solar pumping kit we can add more solar panels if we want to increase the hours of irrigation or use of the pump. Using 2 more panels we can reach 8 hours of daily operation at 50Hz. The pumping panel allows the use of pumps up to 0.75kw.

Components of the solar kit for direct pumping up to 0.75 hp

• 4 solar panels 340w PERC CSUN: It is a high efficiency polycrystalline solar panel, it has a high transmission of electricity thanks to its 5 bus bar connections in the cells. The PERC cells of the module are a dielectric layer that allows to take advantage of radiation that before it ended in the last layer of aluminum of the panel. By taking advantage of it to increase power, we reduce the heat that is transmitted to this last layer in a conventional cell and improve performance. CSUN is a TIER 1 manufacturer with a high quality in the production processes of its solar panels.
• Invert 0.75cv pump controller: It is a control panel for single-phase and three-phase 230v pumps with a maximum power of 0.75cv). It has a screen for viewing and adjusting the pumping parameters, it also has different inputs for well probes to stop and start the pump depending on the level conditions. It has an input to use an alternative source such as a generator or 230v light.
• Structure for 4 panels 30º floor or roof: In the kit we include an aluminum structure for photovoltaic modules with 30º inclination prepared to be installed on the ground or on metal sandwich-type roofs. The structure comes with all the hardware for assembly and the instruction manual with a detailed plan.
• Solar wiring and connectors: The kit includes 20 meters of 6mm unipolar RV-K solar cable for connecting the panels to the controller and the pump, as well as a set of easy-to-mount Pv stick mc weidmuller connectors.

The Solar Kit for 1hp mono or three-phase 230v pump is expandable with 2 more panels and works more hours at 50 Hz.

The direct solar pumping kit without batteries, is valid to operate a pump of up to 1hp single-phase or three-phase 230v and with generator or light input to power the system also on cloudy days. The direct solar pumping kit has IP 65 protection and input protection with solar connectors for easy mounting.

The operation of the solar kit for pumping up to 1 cv is as follows:

• The solar pumping kit for single-phase or three-phase 230v pumps up to 1hp will allow the use of energy from solar panels to operate a pump of up to 1Cp. The 1cv INVT pumping panel starts and operates the pump when solar energy is available.
• By means of this direct solar pumping kit we can run a 1hp pump for up to 6 hours a day in summer months at full 50Hz performance. Calculated for a central area of Spain.

The direct solar pumping solar kit is expandable 

This because with this direct solar pump kit we can add more solar panels if we want to increase the hours of irrigation or use of the pump, since by using 2 more panels we can reach 8.5 hours of daily operation at 50Hz.
The pumping panel allows the use of pumps up to 1hp

The solar kit for direct pumping up to 1 is composed of:

• 8 solar panels 340w PERC CSUN: It is a high efficiency polycrystalline solar panel, it has a high transmission of electricity thanks to its 5 bus bar connections in the cells.The PERC cells of the module are a dielectric layer that allows to take advantage of radiation that before it ended in the last layer of aluminum of the panel. By taking advantage of it to increase power, we reduce the heat that is transmitted to this last layer in a conventional cell and improve performance. CSUN is a TIER 1 manufacturer with a high quality in the production processes of its solar panels.
• Invt 1cv pump controller: This is a control panel for single-phase and three-phase 230v pumps with a maximum power of 1cv). It has a screen for viewing and adjusting the pumping parameters, it also has different inputs for well probes to stop and start the pump depending on the level conditions. It has an input to use an alternative source such as a generator or 230v light.
• Structure for 8 panels 30º floor or roof: In the kit we include an aluminum structure for the photovoltaic modules with 30º inclination prepared to be installed on the ground or in metal sandwich-type roofs. The structure comes with all the hardware for assembly and the instruction manual with a detailed plan.
• Solar cabling and connectors: The kit includes 40 meters of 6mm unipolar RV-K solar cable for connecting the panels to the controller and the pump, as well as a set of Pv stick mc weidmuller connectors for easy mounting.

The Solar Kit with 1.5hp mono or three-phase 230v pump is expandable with 2 more panels and works more hours at 50 Hz.

The direct solar pumping kit without batteries, is valid to operate a pump of up to 1.5hp single-phase or three-phase 230v and with generator or light input to power the system also on cloudy days. The direct solar pumping kit has IP 65 protection and input protection with solar connectors for easy mounting.

The operation of the solar kit for pumping up to 1.5 cv is as follows:

• The solar pumping kit for single-phase or three-phase 230v pumps up to 1.5hp will allow the use of energy from solar panels to operate a pump of up to 1.5hp. The 1cv INVT pumping panel starts and operates the pump when solar energy is available.
• By means of this direct solar pumping kit we can run a 1.5 hp pump for up to 6 hours a day in summer months at full 50Hz performance. Calculated for a central area of Spain.

The direct solar pumping solar kit is expandable 

This because with this direct solar pump kit we can add more solar panels if we want to increase the hours of irrigation or use of the pump, since by using 2 more panels we can reach 8.5 hours of daily operation at 50Hz.
The pumping panel allows the use of pumps up to 1.5hp

The solar kit for direct pumping up to 1.5 is composed of:

• 8 solar panels 340w PERC CSUN: It is a high efficiency polycrystalline solar panel, it has a high transmission of electricity thanks to its 5 bus bar connections in the cells.The PERC cells of the module are a dielectric layer that allows to take advantage of radiation that before it ended in the last layer of aluminum of the panel. By taking advantage of it to increase power, we reduce the heat that is transmitted to this last layer in a conventional cell and improve performance. CSUN is a TIER 1 manufacturer with a high quality in the production processes of its solar panels.
• Invt 1,5cv pump controller: This is a control panel for single-phase and three-phase 230v pumps with a maximum power of 1.5cv). It has a screen for viewing and adjusting the pumping parameters, it also has different inputs for well probes to stop and start the pump depending on the level conditions. It has an input to use an alternative source such as a generator or 230v light.
• Structure for 8 panels 30º floor or roof: In the kit we include an aluminum structure for the photovoltaic modules with 30º inclination prepared to be installed on the ground or in metal sandwich-type roofs. The structure comes with all the hardware for assembly and the instruction manual with a detailed plan.
• Solar cabling and connectors: The kit includes 40 meters of 6mm unipolar RV-K solar cable for connecting the panels to the controller and the pump, as well as a set of Pv stick mc weidmuller connectors for easy mounting.