5000W 48Vhybrid charger inverter with MPPT regulator ideal for small isolated solar installations with lead or lithium batteries

The 5000W 48V hybrid charger inverter is equipped with a MPPT solar charge controller to maximize and regulate the direct current power coming down from the solar panels and charging the battery or battery bank. The transformerless design offers reliable power conversion in a compact size and with high efficiency.
The inverter has an aluminum casing, integrated interface system, it is light and practical, which makes it easy to install.
It is the ideal inverter for small photovoltaic systems or individually for small houses, indoors and outdoors.

CHARACTERISTICS OF THE PWM CHARGER INVERTER

• Pure sine wave inverter
• Integrated MPPT solar charge controller.
• Selectable input voltage range and frequency
• The charging current is adjustable according to your battery type
• AC / solar input priority configurable via LCD settings
• Compatible with mains voltage or generator power
• Automatic restart while AC power is restored
• Protection against overload and short circuit.
• Smart battery charger design for optimized battery performance
• Cold start function
• Parallel operation with up to 9 units available for MKS 5K.

TECHNICAL CHARACTERISTICS

• Rated power: 5,000VA / 4,000W
• Output voltage: 230V
• Frequency range: 50 Hz / 60 Hz (Automatic detection)
• Surge power: 10,000VA
• Peak efficiency: 93%
• Wave Type: Pure Wave
• Battery voltage: 48V
• Floating charge voltage: 54VDC
• Overload protection: 60VDC
• Maximum charge current: 60A
• Charge current: 60A
• Maximum power of solar panels: 3,000 / 4,000W
• MPPT operating voltage range: 60VDC-115VDC
• Maximum power solar field open voltage: 145VDC
• Maximum charge current: 80A
• Standby consumption: 2W
• Dimensions: 140 x 295 x 540mm
• Weight: 13 Kg
• Humidity: 5% to 95% relative humidity (non-condensing)
• Operating temperature: 0º - 55º
• Storage temperature: -15º to 60º

The 5,500W 48V hybrid charger inverter with MPPT 100A regulator with Wifi and GPRS connection can work with batteries or without batteries.

The 5,500W 48V Hybrid Inverter Charger is equipped with a 100A MPPT solar charge controller to maximize and regulate the direct current power coming down from the solar panels and charging the battery or battery bank. This inverter charger has a Wi-Fi connection, which allows you to view all the data of your solar installation from a distance.

The transformerless design offers reliable power conversion in a compact size and with high efficiency.
The inverter has an aluminum casing, integrated interface system, it is light and practical, which makes it easy to install.
It is the ideal inverter for small photovoltaic systems or individually for small houses, indoors and outdoors.

CHARACTERISTICS OF THE MPPT CHARGER INVERTER

• Pure sine wave inverter
• Integrated MPPT solar charge controller.
• Selectable input voltage range and frequency
• The charging current is adjustable according to your battery type
• AC / solar input priority configurable via LCD settings
• Compatible with mains voltage or generator power
• Automatic restart while AC power is restored
• Protection against overload and short circuit.
• Smart battery charger design for optimized battery performance
• Cold start function
• Parallel operation with up to 9 units available for MKS 5K.

TECHNICAL CHARACTERISTICS

• Rated power: 5,500VA / 5,500W
• Output voltage: 230V
• Frequency range: 50 Hz / 60 Hz (Automatic detection)
• Surge power: 11000VA
• Peak efficiency: 97%
• Wave Type: Pure Wave
• Battery voltage: 48V
• Floating charge voltage: 54VDC
• Overload protection: 63VDC
• Charger charging current: 80A
• Maximum open circuit voltage of photovoltaic field: 500VDC
• MPPT range at operating voltage: 120-450VDC
• Standby consumption: 2W
• Dimensions: 100 x 300 x 440mm
• Weight: 12 Kg
• Communication: USB / RS232 / GPRS / WIFI
• Humidity: 5% to 95% relative humidity (non-condensing)
• Operating temperature: 0º - 55º
• Storage temperature: -15º to 60º

The Kostal Piko 1.5-1 MP Plus 1.5kW network inverter is perfect for n single-phase self-consumption installations

The Kostal Piko 1.5-1 MP Plus 1.5kW Inverter can work with or without batteries

If you want to connect batteries, it is compatible with BYD high voltage batteries, however the ability to work with batteries is still under development by the manufacturer. The Kostal Piko 1.5-1 MP Plus 1.5kW Inverter has a two-year warranty that can be extended to 5 if it is registered on the Kostal portal within the first 6 months of its acquisition.

The Kostal Piko 1.5-1 MP Plus 1.5kW inverter is prepared to work in single-phase grid connection facilities, that is, in those installations where it is desired that the consumptions made during the daytime hours in which the solar panels receive radiation Solar is taken as a source of supply the energy supplied by the solar panels, by internal technology this inverter Kostal Piko 1.5-1 MP Plus 1.5kW can work with high voltage batteries in the event that it is desired thanks to the Smart Energy Meter to achieve energy autonomy also the days with less solar radiation and night hours.

The Kostal Piko 1.5-1 MP Plus 1.5kW inverter has a screen on the front that records the data and allows monitoring of the installations, network interfaces and integrated regulation as standard. Monitoring is free through Kostal Solar Portal, Kostal Solar App and the internal Webserver.

The smaller Kostal Piko MP Plus inverters, such as the Kostal Piko MP Plus 1.5kW hybrid inverter, incorporate a single PMP or MPPT which means that all solar panels are connected through the same input port. While Kostal Piko MP Plus inverters with higher power have 2 PMP or MPPT, which means that the solar panels can be divided into two distinct groups and connected to the inverter so that the inverter itself is capable of both groups working in its efficiency point at all times without deviations between the different groups affecting the overall performance of the solar installation, this is very useful when you want to install solar panels with two different inclinations or in different locations so that according to the time of day a group receives more solar radiation than another.

PIKO MP plus: the flexible single-phase inverter
He who says that small photovoltaic installations are not worth it, is wrong in the case of PIKO MP plus. And this KOSTAL photovoltaic inverter with its power classes of 1.5 to 4.6 kW can already be used from three modules and is therefore ideal for small installations in the home itself. The PIKO MP plus provides extremely stable production and its wide range of input voltage allows multiple connection possibilities for photovoltaic modules.
Thanks to its good equipment, it can be connected both as a photovoltaic inverter in a new installation or mounted as an accumulator in an existing installation only on the CA * side. The extension with the KOSTAL Smart Energy Meter * allows use as an energy accumulator * without an additional inverter.

* available later by software update

Product characteristics

• PIKO MP plus: the small to the big
• Flexible use
• One or two PMP followers
• Extended PMP range: perfect for "repowering" (Repowering)
• Smart connected
• Display, data logging, facility monitoring, network and regulatory interfaces integrated as standard
• Free monitoring of the photovoltaic system through the KOSTAL Solar Portal, the KOSTAL Solar App and the internal Webserver
• Here efficiency is written in capital letters
• Smart performance
• Possibility of integration of energy meters
• High efficiency
• Dynamic control of active power and 24-hour measurement
• Possibility of zero injection
• Easy installation
• Single phase power
• Convenient connection without opening the device
• Integrated DC disconnect device
• Simple menu-guided operation and installation
• Optimal protection against dust and water for outdoor use (protection type IP 65)

Extension for photovoltaic installation suitable for battery *
With the KOSTAL Smart Energy Manager you can connect a battery to the PIKO MP plus with two PMP followers
On devices with two PMP followers, one of the PMP followers can be used as a bidirectional input *
Ideal for repowering
On devices with a PMP tracker, the battery function is also given as a battery connection with AC coupling
Ideal for new installations
Battery function in devices with two PMP trackers for battery connection with DC coupling *
* available later by software update
PIKO MP plus: has something special
With the PIKO MP plus you will achieve that even small photovoltaic systems achieve maximum efficiency. And since KOSTAL inverters are well designed products, all the important components for the design of the installation have already been taken into account and are available.

Smart optimization
Above all, the smallest photovoltaic installations of single-family homes benefit from the KOSTAL PIKO MP plus inverter. From three modules, the PIKO MP plus already achieves maximum efficiency and supplies the home with power. Also, from the first quarter of 2019 it will also be possible to connect a battery to the small force package. And all other components for the design of the installation are also assembled.

Smart interaction
The PIKO MP plus has nothing to envy its older brothers regarding the issue of communication. With its extensive package that includes data logging, Webserver and solar portal, this inverter is perfectly equipped as standard and meets all requirements.

The SMA Sunny Boy 2.0 self-consumption inverter is a high quality inverter and ideal for small domestic self-consumption installations.

The Sunny Boy 2.0 grid inverter is the perfect inverter for customers with small self-consumption solar energy systems. For example, it is versatile due to its wide input voltage range from 80 to 600 V, flexible in the selection of photovoltaic modules and easy to install due to its low weight.

After an easy commissioning via WebUI, the Sunny Boy 2.0 allows you to monitor your electricity consumption through the device's wireless network or for online monitoring with Sunny Portal or Sunny Places.

It is the ideal inverter for smaller photovoltaic systems.

Flexible

• Wide input voltage range
• Integrated WLAN interface and Speedwire / Webconnect

informative

• New communication concept thanks to WebUI through the wireless home network
• System data monitoring via WebUI on all smartphones and tablets

Trustworthy

• Latest technology
• Maintenance free thanks to convection cooling.

Easy

• SUNCLIX DC plug-in system
• Easy installation, light weight, without transformer.
• Easy commissioning through WebUI
• Manufacturer's 5 year warranty
• SMA SMA warranty extension Comfort possible up to 25 years

characteristics

• Alternating current: 2 kW
• Manufacturer: SMA Technology AG
• intgr. Data Logger: and
• MPP-Tracker: 1
• Shortcuts: and
• 1 phase

Recharge your electric car with chargers Gafraje basic Ingeteam, firm leader in its sector.

The INGEREV® Garage Basic range allows recharging an electric vehicle in a practical, simple and functional way.

This product is especially suitable for installation in private environments, both in private garage or community or business.

Its design incorporates a steel body and aluminum front that provide great strength and durability, as well as the possibility of use outdoors.

These stations have been designed according to the international standard IEC 61851, offering the possibility of loading vehicles according to mode 3 of said standard.

The station integrates the connection cable with the vehicle in its design, avoiding the repetitive daily task of deploying and picking up the vehicle's own cable, which results in greater comfort and cleanness of the recharging operation.

The INGEREV® Garage Basic is available in single and three-phase versions, with powers between 3.7 and 22 kilowatts. Therefore, it is possible to fully charge an electric vehicle in times ranging from 1 hour to a maximum of 6 or 7 hours, depending on vehicle type and charger.

There are two variants of the model depending on the intake required for vehicle recharging, equipped respectively with the Type 1 and Type 2 sockets as defined by the IEC 62196-2 standard.

It has the possibility to select between a nominal or limited load power, thus allowing a higher level of consumption to the rest of the installation. Both nominal and limited power are configurable by the user within the permissible technical limits.

Through its USB connection it is possible to modify configuration parameters and access usage records, as well as carry out firmware updates, allowing improvements and updates to be added throughout its useful life.

Functionality

• Installation on the wall.
• Loading of vehicles in Mode 3 (IEC 61851).
• Maximum load power from 3.7 to 22 kW.
• Integrated connection cable, Type 1 or Type 2 (connection mode C of IEC 61851).
• Cable support included.
• Activation by key.
• Selection of nominal or limited power.
• Light status indication.
• Updates and configuration via USB.
• Download reports via USB.
• Access to protections through lower cover.
• Optional measurement element.

Recharge your electric car with chargers Gafraje basic 4,6 Kw Ingeteam, firm leader in its sector.

The INGEREV® Garage Basic range allows recharging an electric vehicle in a practical, simple and functional way.

This product is especially suitable for installation in private environments, both in private garage or community or business.

Its design incorporates a steel body and aluminum front that provide great strength and durability, as well as the possibility of use outdoors.

These stations have been designed according to the international standard IEC 61851, offering the possibility of loading vehicles according to mode 3 of said standard.

The station integrates the connection cable with the vehicle in its design, avoiding the repetitive daily task of deploying and picking up the vehicle's own cable, which results in greater comfort and cleanness of the recharging operation.

The INGEREV® Garage Basic is available in single and three-phase versions, with powers between 3.7 and 22 kilowatts. Therefore, it is possible to fully charge an electric vehicle in times ranging from 1 hour to a maximum of 6 or 7 hours, depending on vehicle type and charger.

There are two variants of the model depending on the intake required for vehicle recharging, equipped respectively with the Type 1 and Type 2 sockets as defined by the IEC 62196-2 standard.

It has the possibility to select between a nominal or limited load power, thus allowing a higher level of consumption to the rest of the installation. Both nominal and limited power are configurable by the user within the permissible technical limits.

Through its USB connection it is possible to modify configuration parameters and access usage records, as well as carry out firmware updates, allowing improvements and updates to be added throughout its useful life.

Functionality

• Installation on the wall.
• Loading of vehicles in Mode 3 (IEC 61851).
• Maximum load power from 3.7 to 22 kW.
• Integrated connection cable, Type 1 or Type 2 (connection mode C of IEC 61851).
• Cable support included.
• Activation by key.
• Selection of nominal or limited power.
• Light status indication.
• Updates and configuration via USB.
• Download reports via USB.
• Access to protections through lower cover.
• Optional measurement element.

Recharge your electric car with chargers Gafraje basic Ingeteam 7,4 Kw, firm leader in its sector.

The INGEREV® Garage Basic range allows recharging an electric vehicle in a practical, simple and functional way.

This product is especially suitable for installation in private environments, both in private garage or community or business.

Its design incorporates a steel body and aluminum front that provide great strength and durability, as well as the possibility of use outdoors.

These stations have been designed according to the international standard IEC 61851, offering the possibility of loading vehicles according to mode 3 of said standard.

The station integrates the connection cable with the vehicle in its design, avoiding the repetitive daily task of deploying and picking up the vehicle's own cable, which results in greater comfort and cleanness of the recharging operation.

The INGEREV® Garage Basic is available in single and three-phase versions, with powers between 3.7 and 22 kilowatts. Therefore, it is possible to fully charge an electric vehicle in times ranging from 1 hour to a maximum of 6 or 7 hours, depending on vehicle type and charger.

There are two variants of the model depending on the intake required for vehicle recharging, equipped respectively with the Type 1 and Type 2 sockets as defined by the IEC 62196-2 standard.

It has the possibility to select between a nominal or limited load power, thus allowing a higher level of consumption to the rest of the installation. Both nominal and limited power are configurable by the user within the permissible technical limits.

Through its USB connection it is possible to modify configuration parameters and access usage records, as well as carry out firmware updates, allowing improvements and updates to be added throughout its useful life.

Functionality

• Installation on the wall.
• Loading of vehicles in Mode 3 (IEC 61851).
• Maximum load power from 3.7 to 22 kW.
• Integrated connection cable, Type 1 or Type 2 (connection mode C of IEC 61851).
• Cable support included.
• Activation by key.
• Selection of nominal or limited power.
• Light status indication.
• Updates and configuration via USB.
• Download reports via USB.
• Access to protections through lower cover.
• Optional measurement element.

Charger for electric car for private house with dynamic regulation of single phase power up to 32A and 7.2 KW and cable 5 meters

With the private electric car charger you can charge your electric car or plug-in hybrid anywhere, you just have to hang it up, plug it into the electrical network and connect it to your car.

         What's included in the car charger

• Mode 3 charging point compliant with IEC 61851-1
• 5 meter cable with Type 2 Connector on the vehicle side
• Network monitoring - immediate reduction in load while a network overload is detected - no more tripped circuit breakers
• BatteryCare: Battery Balancing - Special routine to balance the battery and increase battery life and capacity.
• 2.8 inch LCD touch screen - human interface with menus that can monitor and modify all parameters (including intensity) while charging
• Variable recharge speed between 6 and 32 amps. 230V. Adjustable maximum power. (Max 7.4kW)
• Aluminum / Plastic Enclosure - IP54 - IK10

         Features of the car charger

• Type A Differential Protection, advanced protection against overload and overheating.
• Variable recharge speed between 16 and 32 amps. 230V. Adjustable maximum power.
• Total and Partial Energy Meter
• BatterySafe: Battery Balancing - Special routine to balance the battery and increase battery life and
• capacity.
• Aluminum / Plastic Enclosure - IP54 - IK10
• Easily portable to move from residence

The electric car charger for community garage with powers of 3.6 Kw provides a safe charge to any type of vehicle.

With the electric car charger and community garage you can charge your electric car or plug-in hybrid in any of any building.

Metal 04 is a charging point with a modern design that guarantees cost-effectiveness, sustainability and comfort thanks to a well-designed and highly flexible product concept: intelligent connection, efficient control mechanisms, user-friendliness, link with home automation concepts and control by application.
Modern communication standards such as the OCPP protocol and the integrated GSM (2G / GPRS) function establish the connection to the central system without the need for additional cables. The authentication and activation of the cargo operations is carried out by means of RFID.
You can program, monitor and control your Metal 04 very easily, at any time, through an application on the phone (Android or iOS)

Or easily integrate it into your home automation system, and you will also save money, for example by limiting the vehicle charging time to the cheapest electricity rate.
Its robust aluminum housing, its innovative design and the many possible variants and the high degree of connectivity make Metal 04 the perfect solution for any current field of application, as well as for all types of electric vehicles.
It has been awarded the RED DOT award for the best product for its high quality of design.

        
        Technical options:

• Wifi. Smart APP: 802-11n 1x1 Android or IOS

        EVC02 version 3.7 Kw

• Power: 3.7 Kw
• Voltage: 230V AC 1-Phase
• Current intensity: 1 x 16A
• Connection type: TYPE 2 EU
• Weight: 12.5 Kw
• Dimensions: 647 x 180 x 184 mm
• IP protection: IP54
• Impact protection IK10 IK:

The electric car charger for community garage with powers of 3.6 Kw provides a safe charge to any type of vehicle.

With the electric car charger and community garage you can charge your electric car or plug-in hybrid in any of any building.

Metal 04 is a charging point with a modern design that guarantees cost-effectiveness, sustainability and comfort thanks to a well-designed and highly flexible product concept: intelligent connection, efficient control mechanisms, user-friendliness, link with home automation concepts and control by application.
Modern communication standards such as the OCPP protocol and the integrated GSM (2G / GPRS) function establish the connection to the central system without the need for additional cables. The authentication and activation of the cargo operations is carried out by means of RFID.
You can program, monitor and control your Metal 04 very easily, at any time, through an application on the phone (Android or iOS)

Or easily integrate it into your home automation system, and you will also save money, for example by limiting the vehicle charging time to the cheapest electricity rate.
Its robust aluminum housing, its innovative design and the many possible variants and the high degree of connectivity make Metal 04 the perfect solution for any current field of application, as well as for all types of electric vehicles.
It has been awarded the RED DOT award for the best product for its high quality of design.

        
        Technical options:

• Wifi. Smart APP: 802-11n 1x1 Android or IOS

        EVC02 version 3.7 Kw

• Power: 7.2 Kw
• Voltage: 230V AC 1-Phase
• Current intensity: 1 x 32A
• Connection type: TYPE 2 EU
• Weight: 12.5 Kw
• Dimensions: 647 x 180 x 184 mm
• IP protection: IP54
• Impact protection IK10 IK: