Using our Isolated Solar Equipment 1 of 750w winter and 1500w summer you will have lighting and television wherever you are.

The solar equipment 1 750w / 1500w is indicated for isolated homes that need lighting, television and use a tool occasionally. This isolated solar equipment 1 with battery is designed for isolated houses or huts that require electricity for small consumption. It produces up to 750w in unfavorable winter months and up to 1500w in summer months.

Insulated Solar Equipment1 750/1500: Produces up to 1500 watts in summer and 750 watts in winter. The solar kit has 1000w of nominal power and 2000w of peak for 5 seconds. 2 years warranty on components and 25 years on panels.

Photovoltaic solar equipment composed of:

• 1 CSUN Perc 340w solar panel
• 1 cynetic gel carbon 250Ah gel battery
• 1 multiple 1000w axpert inverter with 40Ah mppt regulator and charger.
• Mounting kit (wiring and connectors)

The solar equipment allows to use:

• 32 inch TV (80w) 5 hours
• Drill, jigsaw (400w) 1/2 hour
• Water pump (150w) 1 hour
• Led lighting 4 light points 5w 4 hours
• Charge mobiles

All our solar equipment come with the charge controller and the inverter configured for the equipment's batteries.
We are interested in that the isolated solar equipment works perfectly and our clients do not have problems in the batteries, normally the most critical point of the solar installation. That is why we program our own charging curves in all hybrid inverters and regulators of the solar kits for the battery that the customer purchases. In this way you only have to worry about connecting it without having to program anything, we already do it to get the maximum life from your batteries.

Components of Solar Equipment 1 750w / 1500w for isolated houses

• 1 340w PERC CSUN solar panel: It is a high efficiency polycrystalline solar panel, it has a high transmission of electricity thanks to its 5 bus bar connections in the cells. The PERC cells of the module are a dielectric layer that allows to take advantage of radiation that before it ended in the last layer of aluminum of the panel. By taking advantage of it to increase power, we reduce the heat that is transmitted to this last layer in a conventional cell and improve performance. CSUN is a TIER 1 manufacturer with a high quality in the production processes of its solar panels.
• 1 cynetic gel carbon 250Ah battery: This battery accumulates the energy generated by the two 150w panels to be able to use it at any time it is needed. It is a 12 volt 250Ah C100 gel monoblock battery without maintenance with a micro carbon additive to extend its useful life. The cynetic gel carbon 250 battery is prepared to withstand the charge and discharge cycles of the installation and due to its low internal resistance it has a high charging efficiency. We will not have to replace distilled water throughout its useful life.
• 1 hybrid inverter 12 1000 axpert mppt 40: The axpert hybrid inverter is a multifunction device that has a pure wave inverter of nominal 1000w and 2000w peak, a 40Ah mppt charge regulator and a 20Ah battery charger. Being the mppt type regulator, we obtain the maximum power from the panel at every moment of the day. The built-in 20Ah charger can be used by connecting a generator to recharge the battery when it is low and also supply electricity to the home. Watchpower monitoring software and connection cable included.
•  

Assembly equipment:

The following mounting material is included in the equipment price:

• 10 meters 6mm solar cable
• 2 meters 35mm solar cable
• Male and female weidmuller pv stick
• Battery terminals

Solar kit to install in a camper van or motorhome with a 400W panel and up to 2,800W of production in summer.

The solar kit for camper van 500W 12V 2000Whdia is ideal for vans, caravans, motorhomes and boats since these usually have a service battery already installed

The solar kit comes with all the components to make it work so you don't need anything else.

The solar kit includes:

• 1 Solar Panel 400W Deep Blue 3.0 JA Solar Mono
• 1 ABS Solar panel support for caravans
• 1 Fischer ABS Glue for Brackets and Grommets
• 1 GEL 12V 300Ah Tensite Battery
• 1 Regulator MPPT 100V 30A LCD 12/24V
• 1 Victron Phoenix 12V 500VA Inverter
• 5 Unifilar Cable 6 mm2 SOLAR PV ZZ-F Red
• 5 Unifilar Cable 6 mm2 SOLAR PV ZZ-F Black
• Rest of wiring, terminals and connections

 By including a high-power 400W Monocrystalline Perc panel and an MPPT regulator with LCD screen, the solar kit has first-rate features.

Thanks to its large GEL battery and its Victron pure wave inverter, we will be able to cover the consumption of large caravans. It also includes the ABS structure to hold the plate to the ceiling.

Characteristics and powers of the offered system:

• Installed Photovoltaic Solar Power: 400 W
• Maximum output power to housing: 500VA
• Daily production in WINTER: 1.20 kWh
• Daily production in SUMMER: 2.80 kWh
• Annual AVERAGE daily production: 2.00 kWh

The characteristics of the components are:

- Solar Panel 400W Deep Blue 3.0 JA Solar Mono: it has a length of less than 180cm, it contains half cells that offer a very high efficiency that deliver 400W of power. It has PERC technology and is from the world-renowned manufacturer JA Solar.

- ABS solar panel support for caravans: Accompanied by the grommet to introduce the solar panel cable and its Sika brand glue from the outside.

- 12V 300Ah Tensite GEL Battery: Monobloc battery with GEL electrolyte technology and high capacity. Being GEL does not emit gases or require maintenance

- Regulator MPPT 100V 30A LCD 12/24V: Current controller up to 30A of SRNE that works at a voltage of 12V and 24V

- Victron Phoenix 12V 500VA inverter: This is a high-performance compact inverter, with a 2-year warranty. The strong points of the 500VA Victron pure wave inverter are its starting capacity and its stability in energy delivery.

The MPPT 8000Whdia Solar Expansion Kit is an extension that is used for solar installations.

• The MPPT 8000Whdia Solar Expansion Kit is an extension that is used for 24 and 48V solar installations in which we want to have a greater energy capture capacity. The regulator includes an LCD screen to be able to view and configure the parameters of our installation. If we use it in a 48V installation, the 60A of the MPPT would allow us to connect twice as many panels. It must be taken into account that this kit does not include a battery, a structure to hold the solar panels, or a 230Vac inverter, it is an extension that also includes wiring and accessories to make the corresponding connections.

Characteristics:

• Installed Photovoltaic Solar Power: 1,620 W
• Daily production in WINTER: 4.86 kWh
• Daily production in SUMMER: 11.34 kWh
• Annual AVERAGE daily production: 8.10 kWh

Kit Components:

• 4 x 405W Deep Blue 3.0 JA Solar Mono Solar Panel: The 405W Deep Blue 3.0 JA Solar Mono Solar Panel has some very particular characteristics. It contains half cells that offer a very high efficiency with 405W of power. It has PERC technology and is from the world renowned manufacturer JA Solar.
• 1 x MPPT 150V 60A LCD 12/24/48V regulator: This SR-ML MPPT charge regulator is a current controller up to 60A that works at a voltage of 12V, 24V, 36V and 48V. This charge regulator has advanced technology for monitoring the maximum power point of solar panels to optimize its efficiency at all times. Specifically, this MPPT charge regulator is capable of increasing efficiency between 15 and 20% compared to other PWM regulators. This charge regulator has an LCD screen for device configuration and data monitoring. Overheating protection of the regulator prolongs the life of the batteries.
• 1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
• 1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
• 5 x Single Wire Cable 16 mm2 SOLAR PV ZZ-F Red: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements.
• 5 x Single Wire Cable 16 mm2 SOLAR PV ZZ-F Black: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements.
• 3 x WEIDMULLER PVStick Connectors: They are the most recommended in the case of not having a crimper to be able to connect the usual MC4 connectors. They are compatible with all connector models that are offered as standard in solar panels and do not require any type of tool to assemble them on the cable.
• 1 x Parallel Connectors 2 Flexible MC4 PV Panels: They are the perfect complement to make a parallel connection of up to 2 panels in our solar installation

The 12V 1000Whdia Flexible Panel Kit offers the advantage of semi-flexible panels with a bending capacity of approximately 20°.

Characteristics of the 12V 1000Whdia Flexible Panel Kit system

The photovoltaic system provided in the attached file can generate 0.60 kWh per day in winter (3 hours of sunshine) and 1.40 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 200 W
• Daily production in winter: 0.60 kWh
• Summer: daily production: 1.40 kWh
• Annual average daily production: 1.00 kW

Components of the 12V 1000Whdia Flexible Panel Kit

2 x Flexible Solar Panel 100W 12V: it features high efficiency and offers flexibility, such as a curvature of up to 20°. Manufactured with maximum efficiency cells that allow excellent production in all types of atmospheric conditions. Its great power makes it ideal for boats, caravans, campers and other applications that require a source of solar energy, adaptable to all types of surfaces and lightweight.

1 x monoblock battery with high-performance GEL electrolyte technology: gelation does not generate gas and does not require maintenance. This is a great option if you plan to install the battery in an area with no ventilation. It is recommended to install it in a natural position. Never connect in parallel. To maximize the life of this battery model, the charging voltage must be considered. The price-performance ratio is remarkable, and the manufacturer offers a two-year warranty.

1 x Victron Smart Solar MPPT 75V 15A Regulator: regulator with charge current up to 15A and voltage up to 75V. In addition, the Smart Solar 75V 155A charge controller features ultra-fast Maximum PowerPoint Tracking (MPPT). The Smart Solar 75V 10A charge controller features advanced maximum PowerPoint detection in partly cloudy conditions. For its part, the Autosolar.es Smart Solar 75V 10A charge regulator model stands out for its conversion efficiency, flexible charging algorithms, reprogrammable auxiliary relays and complete electronic protection. It comes with a 5-year warranty. All Smart models have built-in Bluetooth, allowing you to set up and monitor the controller from your phone, tablet or PC using the Victron app.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

2 x 6mm Cable Eye Terminal - 8mm Eye: used to crimp 6mm gauge cables and connect with 8mm diameter screws.

1 WEIDMULLER PVStick Connector: Most recommended if you don't have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable

1 x Parallel Connectors 2 PV Panels MC4 Flexible: ideal for connecting up to 2 modules in parallel in a photovoltaic system.

Full housing, villas and cottages weekends and summer solar system. Valid for lighting, small TV and other small loads.

The system consists of:

• 330W Polycrystalline Solar Panel 12V 24V 48V.- It is one of the most powerful in the 24V range for use in 12 volt solar installations, 24 volt solar installations and 48 volt solar installations. Thanks to 5 buses each cell to produce maximum solar efficiency. It has been manufactured using high-performance polycrystalline silicon cells. It has extra-resistant glass, wiring and MC4 connectors for easy installation. It allows you to generate electricity from solar radiation and use it for any type of electrical consumption that is needed, the 330W polycrystalline 24 volt solar panel offers good performance in the range of 24 volt solar panels.

• 12V / 24V 20A PWM Must Solar Regulator.- It has automatic identification of the system voltage level, intelligent PWM charging mode and adjustable charge and discharge protection. In addition, the 12V / 24V 20A PWM Must Solar Regulator has several algorithms charging based on our battery technology, as well as battery reverse discharge protection. Another of the most attractive features of the 12V/24V 20A PWM Must Solar Regulator has overvoltage protection and 2 USB outputs with 1A of charging power. This PWM regulator supports, depending on the working voltage, the following maximum power:                                                 - 12V: Up to 350W in 12V panels. - 24V: Up to 700W in 24V panels.

• 2 AGM 12V 250Ah Tensite battery for solar installations.- sealed monoblock battery, so it does not require any maintenance. It allows the battery to be installed in places with little ventilation, since no type of gas is emitted during its useful life. Made with ABS, so it withstands demanding extreme conditions and resists the sulfuric acid stored inside. It is characterized by its high quality, durability, versatility and competitiveness compared to other competing batteries in the photovoltaic sector.

• 1 Inverter Charger 3000W 24V MPPT Tensite.- Perfect solution designed and designed for photovoltaic installations isolated from the electrical grid. This Tensite inverter charger has a maximum power of 3000W and is compatible with 24V batteries. The integrated 60A MPPT charge regulator allows efficient charging of the batteries using the maximum power generated by the solar panels at any time of the day.

The system is useful for a maximum daily intake of 1,400 W.

To calculate the electrical consumption elemetos list, look at the wattage of each item and provide the time of use of each device, this will give you your daily intake. (No. of items x power x hours).

The Solar Kit 800W 12V 1000Whdia, recharging systems for small consumption such as lights, televisions and mobile phones.

Characteristics of the Solar Kit for Caravans 800W 12V 1000Whdia system

The photovoltaic system provided in the attached file can generate 0.60 kWh per day in winter (3 hours of sunshine) and 1.40 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 200 W
• Maximum output power to housing: 800VA
• Daily production in winter: 0.60 kWh
• Summer: daily production: 1.40 kWh
• Annual average daily production: 1.00 kWh

Components of the Solar Kit for Caravans 800W 12V 1000Whdia

1 x MUST 200W 12V Monocrystalline Solar Panel: suitable for caravans and 12V installations. It consists of 32 monocrystalline cells, weighs 10.3 kg and has dimensions of 1290 × 760 × 30 mm. The efficiency of the module is 20.4%, making it a very good option for small isolated houses with 3 or 4 panels and a 12V battery installed.

1 x Victron Phoenix 12V 800VA Inverter – This is a high performance compact inverter with a 2-year warranty. The strength of the Victron 800VA Pure Wave Inverter is its starting capacity and the stability of the power output. It can handle the spikes that various electronic devices can have, such as small refrigerators and other devices that do not exceed about 1200W. top performance. Equipped with an LED light that constantly shows the status of the inverter. The Victron brand is a leader in the design and manufacture of sine wave inverters. A very reliable and at the same time compact inverter. Wiring to connect to the battery is included, and the power outlet is a European Schuko plug.

1 x Tensite 12V 250Ah GEL Battery: monoblock battery with high performance GEL electrolyte technology. Gelation does not generate gas and does not require maintenance. This is a great option if you plan to install the battery in an area with no ventilation. It is recommended to install it in a natural position. Never connect in parallel. To maximize the life of this battery model, the charging voltage must be considered. The price-performance ratio is superb, and the manufacturer offers a two-year warranty.

1 x Regulator 12V / 24V 20A PWM Must Solar: the 20A charge regulator works with a 12Vdc or 24Vdc battery and reports all the battery charge information (general operating status, battery voltage, current produced and temperature) from the panel Includes an LCD screen to display. In addition, this 10A solar charge controller from the manufacturer Must Solar can be easily configured to accurately charge batteries regardless of technology, ensuring perfect results and long battery life. It has a 12Vdc or 24Vdc output for charging with DC power, 2 USB ports to charge mobile devices and offers a 2-year manufacturer's warranty. The charge controller has protection against PV array short circuit, PV reverse connection, battery reverse connection, overload and output short circuit. Available from 10A to 60A in 12V DC and 24V DC models.

1 x Structure 1 Falcat Coplanar Panel: it is a support that allows installing the solar panels on the roof with the correct inclination and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal clamping device that allows panel profiles from 30 to 45 mm. It is the best type of construction for metal roofs, sandwich panels or roofs with concrete floors. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

4 x 6mm Cable Eye Terminal - 8mm Eye: used to crimp 6mm gauge cables and connect with 8mm diameter screws.

1 x WEIDMULLER PVStick Connectors – Most recommended if you don't have crimp tools that can connect regular MC4 connectors. They are compatible with all connector models that come standard with solar panels and do not require tools to connect to the cable.

The MPPT 10000Whdia Solar Expansion Kit is an expansion kit for 24 and 48 V solar systems.

Characteristics of the Solar Kit Expansion MPPT 10000Whdia system

The photovoltaic system provided in the attached file can generate 6.08 kWh per day in winter (3 hours of sun) and 14.18 kWh in summer (7 hours of sun).

The characteristics of the proposed system are the following.

• Installed solar generation: 2,025W
• Daily production in winter: 6.08 kWh
• Summer daily production: 14.18 kWh
• Annual average daily production: 10.13 kWh

Components of the MPPT 10000Whdia Expansion Solar Kit

5 x 405W Deep Blue 3.0 JA Solar Mono Solar Panel:  has very particular characteristics. It contains half cells that offer very high efficiency with 405W of power. It has PERC technology and is from the world-renowned manufacturer JA Solar.

1 x MPPT 250V 70A LCD 12/24/48V Regulator: It is a solar charge controller that allows you to recharge batteries from the energy produced by photovoltaic solar panels. This charge regulator, by having MPPT technology, obtains up to 30% more production than if we used one with PWM technology. This regulator supports a maximum working voltage from 250V panels and provides a maximum charge to 70A batteries.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x WEIDMULLER PVStick connectors: They are the most recommended in the case of not having a crimper to be able to connect the usual MC4 connectors. They are compatible with all connector models that are offered as standard on solar panels and do not require any type of tool to be able to assemble them on the cable.

Portable E-Box photovoltaic system designed especialmete RV and bungalows. Practical and easy to use.

• Ready to use. 
• No additional costs for maintenance use. 
• portable 
• Ability to feed 12V and 220V appliances 

• Photovoltaic module CPV36P145 - 145Wp 
• Support for mounting on horizontal surfaces 
• Photovoltaic Cable 2mm - 2 x 10 m 
• PV charge controller STECA
• PV inverter 300W STECA
• Stationary battery 80 Ah 
• Functional safety 

The 1000W 12V 2000Whdia Solar Panel Kit with charger provides up to 1000W of power to cover the consumption of household appliances.

Characteristics of the 1000W 12V 2000Whdia Solar Panel Kit system with charger

The photovoltaic system provided in the attached file can generate 1.22 kWh per day in winter (3 hours of sunshine) and 2.84 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 405 W
• Maximum output power to housing: 1000W
• Daily production in winter: 1.22 kWh
• Summer: daily production: 2.84 kWh
• Annual average daily production: 2.03 kWh

Components of the Solar Panel Kit 1000W 12V 2000Whdia with charger

1 x Solar Panel 405W Deep Blue 3.0 JA Solar Mono: they have very special properties. It contains a half cell that provides a very high level of efficiency with a power of 405W. Powered by PERC technology and supplied by world renowned manufacturer JA Solar.

1 x Voltronic 1000W 12V Inverter Charger Pre-Assembled with Guards – This is a pre-assembled kit containing a Voltronic 1000W 12V Isolated Inverter that provides up to 1000W of output power from a 12V battery. The inverter has one input for the solar panel used to supply power and charge the 12V battery. This energy passes through an internal MPPT type charge controller with a charging power of 40A and is used to increase the charge of the battery and make it usable. A 12V battery charger with up to 20A charging force is also included in case you need to recharge the battery from a compatible generator or external mains power. The entire set is pre-assembled and wired on a metal plate that can be easily hung on the wall. Simply connect the input of the solar panel to the corresponding input of the fuse that protects it, and the consumption to the output of the circuit breaker. The shield plate must be placed high enough for the battery cables to properly reach the terminals.

1 x Tensite 12V 250Ah GEL Battery: monoblock battery with high performance GEL electrolyte technology. Gelation does not generate gas and does not require maintenance. This is a great option if you plan to install the battery in an area with no ventilation. It is recommended to install it in a natural position. Never connect in parallel. To maximize the life of this battery model, the charging voltage must be considered. The price-performance ratio is superb and the manufacturer offers a two-year warranty.

1 x Structure 1 Falcat Coplanar Panel: structures of the same type using the appropriate connection kit. Support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple.

1 x WEIDMULLER PVStick Connectors – Most recommended if you don't have crimp tools that can connect regular MC4 connectors. They are compatible with all connector models that come standard with solar panels and do not require tools to connect to the cable.

1 x Roll 10mm2 H1Z2Z2-K 15m Black Single Wire Cable: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Single Wire Cable 10mm2 H1Z2Z2-K 15m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

Full housing, houses or huts weekend and summer solar system. It is valid for consumption.