212 liters and two solar panels Hot water equipment by solar energy of the highest efficiency with Drain Back system integrated.

SOLARTERMIC HIGH SELECTIVE photothermal collectors guarantee hot water independently, cleanly and free of charge, for more than 20 years even on cloudy or low radiation days.

The most efficient flat collectors on the market.

With an optical factor of 83.5% and thermal losses of 3.80 W / m2K and 0.009 W / m2K2, the SOLARTERMIC HIGH SELECTIVE collectors produce up to 1,400 KWh / m2 per year, becoming the maximum exponent of the market in this type of technology.

This is achieved thanks to:

• The absorber coated with Titanium Oxide highly selective (Blue-Tinox) through the PVD process.
• The DHP type copper pipes have been welded in meander to the absorber by laser with more than 15 thousand welding points, guaranteeing a transfer of perfect heat on the entire surface.
• High quality black rock wool insulation Minimizes losses to their minimum expression:

1.   - Rear insulation 50 mm thick and 70 Kg / m3 of  density.
2.   - Lateral insulation 20 mm thick and 100 Kg / m3 of  density.

Flexibility and versatility

    Up to 6 SOLARTERMIC HS 2.7 collectors can be connected in parallel, maintaining a uniform flow, thus becoming a single collector of 15.42 m2.

General description

The SOLARTERMIC HS sensors and their accessories are specially designed to facilitate the quick and easy installation of them, guaranteeing maximum safety in adverse environmental conditions and any overpressure caused by steam boiling.

CONNECTION KIT
Composed of 4 clamps and 4 silicone O-rings High quality, 2 NPT female connectors with ¾ "thread and 2
plugs.

UNION KIT
Composed of two sleeves flexible stainless steel 4 clamps and 4 O-rings high quality silicone.

Each collector has a hole in contact with the absorber, especially indicated to house the temperature probe.

Maximum durability and protection to the outdoor

The collector frame is coated aluminum powder with a special treatment to get the maximum resistance in coastal areas.

The 0.4 mm thick back plate is made of Aluzinc high durability (7 times more resistant to corrosion than galvanized steel).

The compression and sealing materials used are made of high quality silicone and polyurethane, especially
designed for resistance to extreme temperatures and Water.

The transparent 3.2 mm cover is tempered glass anti-hail with low iron content.

Supports made of aluminum for inclined and flat roofs, light and easy to transport and install, as well as guaranteeing maximum protection against corrosion in saline environments such as coastal areas.

SOLARTERMIC solar packs are designed to facilitate the selection and installation of individual ACS solutions, including everything necessary for the execution of the same:

• Collectors, supports and connections thereof.
• Drain Back accumulators with drive units and control incorporated.

The Solartermic HS sensors and their accessories are specially designed to facilitate the quick and easy installation of them, guaranteeing maximum safety in adverse environmental conditions and any overpressure caused by steam boiling.

The Connection Kit consists of 4 clamps and 4 high quality silicon gaskets, 2 NPT female connectors with ros "thread and 2 plugs and the Union Kit consists of 2 flexible stainless steel sleeves, 4 clamps and 4 O-rings high quality silicone.

In addition each collector has a hole in contact with the absorber, especially suitable to house the temperature probe.

428 liters and two solar panels Hot water equipment by solar energy of the highest efficiency with Drain Back system integrated.

SOLARTERMIC HIGH SELECTIVE photothermal collectors guarantee hot water independently, cleanly and free of charge, for more than 20 years even on cloudy or low radiation days.

The most efficient flat collectors on the market.

With an optical factor of 83.5% and thermal losses of 3.80 W / m2K and 0.009 W / m2K2, the SOLARTERMIC HIGH SELECTIVE collectors produce up to 1,400 KWh / m2 per year, becoming the maximum exponent of the market in this type of technology.

This is achieved thanks to:

• The absorber coated with Titanium Oxide highly selective (Blue-Tinox) through the PVD process.
• The DHP type copper pipes have been welded in meander to the absorber by laser with more than 15 thousand welding points, guaranteeing a transfer of perfect heat on the entire surface.
• High quality black rock wool insulation Minimizes losses to their minimum expression:

1.   - Rear insulation 50 mm thick and 70 Kg / m3 of  density.
2.   - Lateral insulation 20 mm thick and 100 Kg / m3 of  density.

Flexibility and versatility

    Up to 6 SOLARTERMIC HS 2.7 collectors can be connected in parallel, maintaining a uniform flow, thus becoming a single collector of 15.42 m2.

General description

The SOLARTERMIC HS sensors and their accessories are specially designed to facilitate the quick and easy installation of them, guaranteeing maximum safety in adverse environmental conditions and any overpressure caused by steam boiling.

CONNECTION KIT
Composed of 4 clamps and 4 silicone O-rings High quality, 2 NPT female connectors with ¾ "thread and 2
plugs.

UNION KIT
Composed of two sleeves flexible stainless steel 4 clamps and 4 O-rings high quality silicone.

Each collector has a hole in contact with the absorber, especially indicated to house the temperature probe.

Maximum durability and protection to the outdoor

The collector frame is coated aluminum powder with a special treatment to get the maximum resistance in coastal areas.

The 0.4 mm thick back plate is made of Aluzinc high durability (7 times more resistant to corrosion than galvanized steel).

The compression and sealing materials used are made of high quality silicone and polyurethane, especially
designed for resistance to extreme temperatures and Water.

The transparent 3.2 mm cover is tempered glass anti-hail with low iron content.

Supports made of aluminum for inclined and flat roofs, light and easy to transport and install, as well as guaranteeing maximum protection against corrosion in saline environments such as coastal areas.

SOLARTERMIC solar packs are designed to facilitate the selection and installation of individual ACS solutions, including everything necessary for the execution of the same:

• Collectors, supports and connections thereof.
• Drain Back accumulators with drive units and control incorporated.

The Solartermic HS sensors and their accessories are specially designed to facilitate the quick and easy installation of them, guaranteeing maximum safety in adverse environmental conditions and any overpressure caused by steam boiling.

The Connection Kit consists of 4 clamps and 4 high quality silicon gaskets, 2 NPT female connectors with ros "thread and 2 plugs and the Union Kit consists of 2 flexible stainless steel sleeves, 4 clamps and 4 O-rings high quality silicone.

In addition each collector has a hole in contact with the absorber, especially suitable to house the temperature probe.

Forced circulation system Galem for ACS.

Forced circulation systems are composed of Galem Galem SV solar collectors (vertical) or SH (horizontal), a structure for flat or sloping roof, interacumulador Galem IN / 1, solar control, hydraulic and heat transfer fluid group.

Technical specifications:

• 1 exchanger
• 1 tank of 200 liters
• 1 collector catchment area of 2.37 m2

Forced circulation system Galem for ACS. 300L tank.

Forced circulation systems are composed of Galem Galem SV solar collectors (vertical) or SH (horizontal), a structure for flat or sloping roof, interacumulador Galem IN / 1, solar control, hydraulic and heat transfer fluid group.

Technical specifications:

• 1 exchanger
• 1 tank of 300 liters
• 2 collectors catchment area of 2.37m2 each

Forced circulation system Galem for ACS. 500L tank.

Forced circulation systems are composed of Galem Galem SV solar collectors (vertical) or SH (horizontal), a structure for flat or sloping roof, interacumulador Galem IN / 1, solar control, hydraulic and heat transfer fluid group.

Technical specifications:

• 1 exchanger
• 1 tank of 500 liters
• 3 collectors catchment area of 2.37m2 each

Daitsu forced circulation equipment up to 160 liters for housing 1-3 people. Budget request custom.

• Solar panel
• Intersol deposit 1 160 liters
• Media.
• Switchboard.
• GH20 Hydraulic
• VE Expansion tank 18

Daitsu forced circulation equipment up to 350 liters capacity for housing 4-6 people.

The team includes:

• Solar panel
• Intersol deposit 1 350 liters
• Media.
• Switchboard.
• GH20 Hydraulic
• VE Expansion tank 18
• Ask us for installation if needed.

• Upper: extracts heat from the outside air and transfers it to the inside by means of cooling pipes. 
• Inside part: hydraulic part that is responsible for transferring heat from the fluid to the water and send it to the terminal units (radiators or underfloor heating) and hot water. In the "air conditioning" mode reduces the inside temperature of the cool water and distributed throughout the house. 
• Hot water pump: Hot water storage needs housing. Is heated by a heat exchanger embedded support incorporating a secondary power unit. Optionally, you can insert a solar system with external DHW exchange or double exchange. 

• Capacity: 190 liters 
• Operating Temperature Range: -7/43 ° C 
• Assigned / Power consumption: 1.85 / 0.75 Kw 
• Dimensions: 730/1660 mm (width / length) 
• Net Weight: 91 Kg 
• Maximum working pressure: 7 bar 
• Temp. leaving water: 38 º / 70 º. Preset 65 
• Code: SO 30011

Air-water pump for hot water 300 liters heat. Easy to install Compact model.  Operating all year without additional heating. 

• Upper: extracts heat from the outside air and transfers it to the inside by means of cooling pipes. 
• Inside part: hydraulic part that is responsible for transferring heat from the fluid to the water and send it to the terminal units (radiators or underfloor heating) and hot water. In the "air conditioning" mode reduces the inside temperature of the cool water and distributed throughout the house. 
• Hot water pump: Hot water storage needs housing. Is heated by a heat exchanger embedded support incorporating a secondary power unit. Optionally, you can insert a solar system with external DHW exchange or double exchange. 

• Capacity: 300 liters 
• Operating Temperature Range: -7/43 ° C 
• Assigned / Power consumption: 3 / 0.83 Kw 
• Dimensions: 650/1920 mm (width / length) 
• Net Weight: 105 Kg 
• Maximum working pressure: 7 bar 
• Temp. leaving water: 38 º / 70 º. Preset 65º
• Code: SO 30012

Thermo hybrid solar hot water with solar panels. Get hot water for your home or business clean, simple, and economical manner. 

Its operation is very simple: you have two separate electrical systems, one for connecting to the grid and one for connecting photovoltaic solar panels. Both systems can operate simultaneously or each independently. 

In good weather the water is heated by solar energy. The network connection ensures system operation over long periods of bad weather. 

The heater has 2 thermostats, one for low temperature or other for maximum. The electrical network system is put in place just in case reached that minimum temperature. Between these temperatures only the solar system is activated, automatically turning off east to reach the maximum temperature. 

Electricity costs, therefore, is greatly reduced. In areas with good weather this spending may be reduced to 100%. 

The heater also has a system to connect to other gas or electric boiler for heating and underfloor heating and water Preheat also lowering consumption and increasing their lifespan. 

You can also, if there is excess solar energy advantage for the excess solar energy to electric appliances by connecting the heater to an investor. 

The price includes: Thermo Hybrid, solar panels, structure, cables, connections and switch DC

They deal with 1000W solar panels (4 panels 250W), 1500W (6 panels) and 2000W (8 panels). To consult other powers

Increased thermal maximum in 1 hour

                                                        1kw             1.5 kw             2kw

            Thermo 100 liters             8.8ºC           13.2ºC           17.6ºC

            Thermo 125 liters             7.3ºC            11ºC              17.7ºC

            Thermo 160 liters             5.8ºC            8.8ºC             11.7ºC

            Thermo 200 liters             4.4ºC            6.6ºC              8.8ºC

Advantages over solar panels (solar thermal): 

• Easier and faster installation 
• No pipes between the water heater and panels 
• The panels can be placed up to a distance of 100m from the thermal 
• Security have hot water all year 
• No problems with the excess solar energy 
• Virtually no maintenance 
• Shelf life much longer 

Technical characteristics: 

• Available 100, 125, 160 and 200 liters. 
• Built-in thermometer 
• Mediate temperature control 2 thermostats 
• Vertical wall Intalación 
• Depot in fritted steel 
• Cover painted electrostatically 
• Built-exchange coil 
• Corrosion protection by magnesium anode 
• CFC-free polyurethane insulation. 42mm thick 
• Minimum heat loss 
• 2 resistors ceramic independent: for one system. Solar and network 
• Enamelled resistors pods 
• Electrical protection IP45