The "SunTracer OG+" solar motor with structure is valid for trackers up to 2 m2 of panels and works at 12V

The Solar Motor "SunTracer OG+" with rear structure 0135, is suitable for grid panels up to dimensions of 2m x 1m, use in houses on the roof of houses, for traffic signaling, for public lighting use, for power supply in country houses, for power plants.

The wind resistance is 130 km/h. All metal gear parts inside ensure high destruction forces.

Also, this sun tracker includes the function of anti-shade software, however, the ground screw and main pole are not part of this sun tracker package. You can purchase it separately.

Description of the Solar Motor "SunTracer OG+" with rear frame 0135

• Movement Axis Number: Single Axis
• Astro Tracking Algorithm: Yes, but only one axis
• CPV Usage (Concentrated PV Usage): Yes, but only a straight or a straight parabolic
• Weight: 25Kg
• Dimensions: 1 piece of 2.0 m x 1.0 m in total 2.0 m2
• Solar panel area: 2 m2
• Real time clock and date with bck. battery: yes
• USB or RS485 interface to PC: Yes
• Network communication type: RS485
• Type of application program for monitoring and adjustment: Web monitors via Helios analysis.
• Configuration via PC: Yes
• Tracking via PC: Yes
• Update via PC: Yes
• Control and driving via PC: Yes
• Expected lifetime: 800-1000h motor running (DC motor is replaced every 8 years if every day is cycle), backup battery is replaced every 3–5 years if battery is on, the other 15 years.
• Hour angle: 92°; 46° East—46° West.

Main pole of the 1-axis Solar Tracker in charge of supporting both the tracker structure and the solar panels

These main pillars are responsible for supporting the solar panels on top of the trackers.

Solar tracker main pole for double moving axes solar tracker w backstr for four solar panels.

The main pole of the solar tracker is a hot-dip galvanized zinc coating per EN - ISO 1461 with an average thickness of 80 um.

Pole support, it is suitable for the 2-axis solar tracker with 4 panels: photovoltaic, concentrators—CPV and/or heliostats.

With the Pole Mount, you can install the 4-panel 2-axis solar tracker, which will be perfect for connecting to the grid on the roof of houses, traffic signals, street lighting, country houses, power plants.

The solar panels are connected in series and the output is directly connected to the inverter or an external charging device.

Technical description of the Pole mount for 4-panel 2-axis solar tracker/solar tracker

Set of parts without metallic structure for the two-axis solar tracker w backstr of 15 solar panels.

Set of pieces without metallic construction, weighing: 37.2 kg.

You can build the rear structure of the solar tracker yourself using this Kit, which provides you with the following parts:

• Rotating parts
• Actuators
• positioner
• Connections Box
• Cables
• Wind sensor.

To build the steel reinforcement, plans and all documentation to build are available through the purchase of the “license to build” with a minimum purchase of 5 licences.

Solar tracker 1 axis inclined 20 degrees for 16m2 panels, it is suitable for photovoltaic panels, concentrators—CPV, heliostats.

The 1 axis solar tracker inclined 20 degrees for 16m2/8 panels, is perfect for connecting to the network on the roof of houses, cabins, power plants.

The solar panels are connected in series and the output is directly connected to the inverter or an external charging device.

Wind resistance is a minimum of 144 km/h.

Also, this sun tracker includes the function of anti-shade software, however, the ground screws are not part of this sun tracker package. You can purchase it separately.

Description of the Solar tracker 1 axis inclined 20 degrees-panels 16m2/8

• Movement axis number: 1 axis
• Single axis, inclined 20° for 16m2/8
• Astronomical Tracking Algorithm: Yes, 0.5 degree accuracy (0.1 ****)
• CPV Usage (Concentrated PV Usage): Yes, all types including round parabolic dishes, but mainly served by 12 flat solar panels
• Dimensions 1.00m × 2.00m
• Maximum weight 25 kg each (300 Kg)
• Real time clock and date with bck. battery: yes, included
• USB or RS485 interface to PC: yes, included
• Network communication type: RS485
• Type of application program for monitoring and adjustment: Helios or Sigma
• Configuration via PC: yes, included
• Tracking via PC: yes, included
• Update via PC: yes, included
• Control and driving via PC: yes, included
• Expected lifetime: 25 years, except DC brush motors, which have about 1500h lifespan or about 10 years of follow-up.
• Hour angle: 100°.

Solar tracker 1 axis online for 24 panels with pillar, it is a cost-effective tracking for commercial photovoltaic plants.

The 1-axis online Solar Tracker system for 24 panels with pillars offers optimal tracking control in commercial solar power plants. Also, higher reliability and features lower power consumption than positioning sensor.

The sun tracker features an anti-back shadow function. Its intelligent design allows the use of the plot for agricultural purposes.

Characteristics of the Solar Tracker 1 axis online for 24 panels with pillar

• 25 years of operational life
• Up to 10 years warranty—optional
• ultra low maintenance
• Low energy consumption
• Easy installation setup
• Equipped with powerful analytics
• back function included
• Designed and manufactured in the EU.

Description of the Solar Tracker 1 axis online for 24 panels with pillar

• Movement axis number: 1 axis
• Astronomical Tracking Algorithm: Yes, 0.5 degree accuracy (0.1 ****)
• CPV Usage (Concentrated PV Usage): Yes, all types including round parabolic dishes, but mainly served by 15 flat solar panels.
• Real time clock and date with bck. battery: yes, included
• USB or RS485 interface to PC: yes, included
• Network communication type: yes, included
• Type of application program for supervision and adjustment: yes, included
• Configuration via PC: yes, included
• Tracking via PC: yes, included
• Update via PC: yes, included
• Control and driving via PC: yes, included
• Expected lifetime: 800-1000h of motor running (DC motor is replaced every 7–10 years if every day is one cycle), all other 25 years.
• Hour angle: 100˚, software and hardware limit 50°E to 50°W; Elevation angle horizontal line tracker.

1-axis solar tracker with structure for 12 panels for isolated or self-consumption solar installations.

The Sun Tracer 1-axis solar motor, perfect for connecting to the grid on the roof of houses, traffic signals, public lighting, country houses, power plants.

The solar panels are connected in series and the output is directly connected to the inverter or an external charging device.

Wind resistance is a minimum of 180 km/h. In one year with a single shaft motor 25% more energy revenue can be obtained compared to a fixed system.

Also, this sun tracker includes the function of anti-shade software, however, the ground screw is not part of this sun tracker package. You can purchase it separately.

Technical description of the Sun Tracer 1-axis solar motor

• Movement axis number: 1 axis
• Astronomical Tracking Algorithm: Yes, 0.5 degree accuracy
• Rear structure: 12 solar panels
• Dimensions: 0.82m x 1.604m
• Maximum weight of 25 kg each.
• Solar panel area: 20m
• Real time clock and date with bck. Battery: Yes, Included
• USB or RS485 interface to PC: Yes, Included
• Network communication type: CAN Bus, RS485
• Application program type for monitoring and adjustment: Web monitors via website
• Configuration via PC: Yes, Included
• Tracking via PC: Yes, Included
• Update via PC: Yes, Included
• Control and driving via PC: Yes, Included.