Fronius Symo GEN24 6.0 Plus inverter, an advanced device that allows a network connection system.
The FRONIUS Symo GEN24 6.0 Plus Hybrid Inverter is an advanced device that allows us to have a grid connection system with all possible features. This 6kW three-phase model is capable of working with batteries for self-consumption and offers a backup energy solution when the network fails. With 2 MPPT and a very wide operating range to have a very flexible solar installation.
Features of the FRONIUS Symo GEN24 6.0 Plus Hybrid Inverter
The FRONIUS Symo GEN24 6.0 Plus Hybrid Inverter is a 6kW output power, three-phase, transformerless grid connection inverter with a series of additional features compared to the normal Symo three-phase range. The new generation of Fronius GEN24 Inverters offers state-of-the-art technical characteristics for direct self-consumption installations, both with and without accumulation.
Among the most notable features of the FRONIUS Symo GEN24 6.0 Plus Hybrid Inverter are the following:
PV Point: It is an emergency power function built into the inverter itself. In the event of a power outage, the FRONIUS Symo GEN24 6.0 Plus Hybrid Inverter can automatically generate an output of up to 3kW in single-phase even without having to install batteries.
Total Backup Power: by combining the inverter with a storage system, you can supply emergency power for single-phase consumption through the battery, with a time variation of less than 90 seconds. This produces a high autonomy and flexibility in situations in which there is a power outage. To make use of this function it is necessary to decouple from the network by means of contactors, thus preventing the Fronius from working in parallel with the electrical network and there being voltage in the line upstream of the meter.
Controlled active cooling: Through a dissipation system that has forced ventilation, we will have a longer useful life of the components. We will also have IP66 protection that will allow us to install it both indoors and outdoors.
Data sheet
| Input Data |
SYMO GEN24 6.0 Plus |
SYMO GEN24 8.0 Plus |
SYMO GEN24 10.0 Plus |
| Number of MPP followers |
2 |
| Max input current (Idc max 1/ Idc max 2) |
25 A / 12,5 A |
| Maximum short-circuit current of MPP1 / MPP2 (Isc pv)* |
37,5 A / 18,75 A |
| DC input voltage range (Udc min. - Udc max.) |
80 V - 1.000 V |
| Rated input voltage (Udc,r) |
595 V |
| Commissioning voltage (start Udc) |
150 V |
| MPP voltage range |
80 V - 800 V |
| Number of DC inputs |
2 / 1 |
| Max. PV generator output (Pdc max.) |
9 kWpico |
12 kWpico |
15 kWpico |
| OUTPUT DATA |
SYMo GEN24 6.0 Plus |
SYMO GEN24 8.0 PLUS
|
SYMO GEN24 10.0 PLUS |
| Rated AC power (Pac,r) |
6.000 W |
8.000 W |
10.000 W |
| maximum power output |
6.000 VA |
8.000 VA |
10.000 VA |
| Max. AC output current (Iac nom.) |
16,4 A |
| Grid coupling (voltage range) |
3~NPE 400 V / 230 V ó 3~NPE 380 V / 220 V (+20 % / - 30%) |
| Frequency (frequency range) |
50 Hz / 60 Hz (45 Hz – 66 Hz) |
| Nonlinear distortion coefficient |
< 3 % |
| Power factor (cos φac,r) |
0,7 - 1 ind. / cap. |
| emergency power |
3~NPE 400 V / 230 V |
| PV POINT OUTPUT DATA |
SYMO GEN24 6.0 Plus |
SYMO GEN24 8.0 PLUS |
SYMO GEN24 10.0 PLUS |
| rated output power |
3.000 VA |
| Rated output current (Iac max) |
13 A (25 A) |
| Grid coupling (voltage range) |
1 ~ NPE 220 V / 230 V |
| Frequency (frequency range) |
53 Hz / 63 Hz |
| transition time |
> 30 seconds |
| CONEXIÓN A BATERÍA |
SYMO GEN24 6.0 PLUS |
SYMO GEN24 8.0 PLUS |
SYMO GEN24 10.0 PLUS |
| Number of DC inputs |
1 |
| Max input current (Idc max) |
22A |
| DC input voltage range (Udc min - Udc max) |
160 V - 700 V |
| Max input / output power 1) |
6.250 W |
8.330 W |
10.420 W |
| Max AC charging power |
6.000 W |
8.000 W |
10.000 W |
| GENERAL DATA |
SYMO GEN24 6.0 PLUS |
SYMO GEN24 8.0 PLUS |
SYMO GEN24 10.0 PLUS |
| Dimensions (height x width x depth) |
594 x 527 x 166 mm |
| Weight |
25 / 27 kg |
| Protection type |
IP 66 |
| Protection class |
1 |
| Loss of power overnight |
< 10 W |
| Overvoltage category (DC / AC) 1) |
2/3 |
| Investor concept |
without transformer |
| Refrigeration |
Regulated air cooling |
| Facility |
Indoor and outdoor installation |
| Ambient temperature range |
-25 - +60 °C |
| Permissible air humidity |
0 - 100 % |
| Maximum altitude |
3,000 m / 4,000 m (unrestricted / restricted voltage range) |
| DC connection technology |
3x DC+ and 3x DC quick connect terminal blocks 1.5 - 10 mm² |
| Main connection technology |
1x BATTERY+ and 1x BATTERY quick connection terminals 1.5 - 10 mm² |
| AC connection technology |
5-pole CA quick connect terminals 1.5 - 10 mm² 5x PE screw terminals 2.5 - 16 mm |
| Certificates and compliance |
VDE V 0126-1-1, VDE-AR-N 4105, ÖVE/ÖNORM E 8001-4-712 |
| Emergency Power Features |
PV Point, emergency power function 1) |
| Compatible batteries |
BYD BATTERY-BOX HV, LG CHEM RESU7H / RESU10H 3) |
| PERFORMANCE |
SYMO GEN24 6.0 PLUS |
SYMO GEN24 8.0 PLUS |
SYMO GEN24 10.0 PLUS |
| Maximum performance |
98,1% |
| European Yield (ηEU) |
97,1 % |
| MPP Fitting Performance |
> 99,9 % |
| SAFETY EQUIPMENT |
SYMO GEN24 6.0 PLUS |
SYMO GEN24 8.0 PLUS |
SYMO GEN24 10.0 PLUS |
| DC insulation measurement |
Yes |
| Overload behavior |
Displacement of the working point. power limitation |
| DC disconnector |
Yes |
| Reverse polarity protection |
Yes |
| INTERFACES |
SYMO GEN24 6.0 PLUS |
SYMO GEN24 8.0 PLUS |
SYMO GEN24 10.0 PLUS |
| WLAN / Ethernet LAN |
Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON) |
| 4 digital inputs/outputs and 6 digital inputs |
Wave control receiver interface, power management |
| USB 2.0 (Socket-A) |
1A supply |
| Emergency stop (WSD) |
Yes |
| Datalogger and web server |
Including |
| 2x RS485 |
Modbus RTU SunSpec or controller connection, SunSpec, Smart Meter |
1) Depending on the connected battery. 2) According to IEC 62109-1 3) Supported soon.
