The Victron 5000W 48V 16000Whdia Solar Kit, this system combines the reliability and durability of Victron inverters.

Characteristics of the Victron 5000W 48V 16000Whdia Solar Kit system

The photovoltaic system proposed in the annex can generate 12.00 kWh per day (3 hours of sun) in winter and 28.00 kWh per day (7 hours of sun) in summer.

The total storage capacity of the batteries provided is 10.80 kWh. For reasons of durability and maintenance, it is not recommended to discharge the battery beyond 91% of its total capacity, so the available energy stored in the battery is 9.83 kWh.

The recommended system characteristics are as follows.

• Installed solar power generation: 4,000W
• Daily production in winter: 12.00 kWh
• Summer daily production: 28.00 kWh
• Average annual daily production: 20.00 kWh
• Accumulated storage battery: 10.80kWh
• Practical battery accumulation: 9.83 kWh

Components of the Victron Solar Kit 5000W 48V 16000Whdia

8 x Solar Panel 500W Deep Blue 3.0 JA Solar: It has some very special features. It contains a half cell that provides a very high level of efficiency at 500W of power. It uses PERC technology and is made by the world-famous manufacturer JA Solar. The 500W Deep Blue Solar Panel is a JA Solar brand panel, one of the best manufacturers seen in the industry today. This range has PERC-type monocrystalline cells that give the panels magnificent technical properties. These cells offer the potential for higher productivity and efficiency than regular panels with the same number of cells.

1 x Victron MultiPlus-II 48V 5000VA 48V 70+50A Inverter: a pure sine wave inverter providing continuous power output up to 5000VA and a high capacity battery charger. It can also work with battery only in isolated mode like the classic Multiplus and connect and store network energy for self-consumption systems. With a battery charger you can also connect a generator. When the battery runs out, it uses the same inverter that starts the generator (if the generator has an auto start function) or an inverter that feeds into the mains to charge the battery. We never run out of power and our state of charge never bothers us. To use the solar panel, you will need to purchase a charge controller separately or connect a grid-tied inverter to this Multiplus II. The charger of this inverter is 70A at 48V.

1 x Victron Smart Solar MPPT 250V 70A regulator: regulator with charge current up to 70A and voltage up to 250V. In addition, the Smart Solar 250V 70A charge controller features ultra-fast maximum PowerPoint tracking (MPPT). The Smart Solar 250V 70A charge controller features advanced maximum PowerPoint detection in partly cloudy conditions. For its part, the Autosolar.es Smart Solar 250V 70A charge controller model stands out for its conversion efficiency, flexible charging algorithms, reprogrammable auxiliary relays and comprehensive electronic protection. It comes with a 5-year warranty. All Smart models have built-in Bluetooth, so you can connect to the Victron app to set up and monitor your controller from your phone, tablet or PC.

1 x Victron Cerbo GX Monitoring: is an accessory that provides complete surveillance of the entire solar system. Connect countless Victron devices, including a full range of inverters, MPPT controllers, chargers, battery monitors and more. Likewise, you can connect to the internet and have all the information available on the VRM portal or monitored locally; includes Bluetooth and an optional GX Touch 50 display, allowing for remote firmware updates and configuration changes of connected components.

3 × 3.5kWh Pylontech US3000C 48V Lithium Battery: advanced Lithium-ion Phosphate batteries available with lithium technology batteries with very attractive technical characteristics at a very competitive price. Thanks to the easily stackable format, up to 80 batteries can be connected in parallel in groups of 16 units, as technology allows. Everything is monitored by an internal BMS that distributes power between cells and modules to prevent overcharging or overdischarging. This characteristic of lithium batteries is important to ensure a long life.

3 x Brackets Pylontech 3.5kWh US3000 48V: securely connects lithium battery modules and ensures ventilation between modules and the space required for proper installation. These are required if you do not have a rack cabinet for this battery model.

1 x Pylontech LV Battery-Inverter Cables: allow power and data to be connected between the Pylontech batteries and the inverters that connect them. 2 meter long 4 AWG cables supporting up to 120A and 3 meter communication cable with crimp for CAN communication.

2 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.

1 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.

1 x Busbar box for 250A parallel connection: this small power rail is designed to easily group several lithium batteries. Thanks to this product, up to 3 groups of batteries can be connected to the same inverter. Thanks to the features offered by the 250A lithium bar box for parallel connection, the autonomy of your photovoltaic system can be tripled.

1 x RJ45 UTP Cable 1.8m: This is a standard network cable with 4 twisted copper pairs at each end and a standard connection sequence. It has RJ45 connectors on each end and is used for communication between compatible devices or between a computer and a router.

1 x Victron VE.Direct 1.8m Cable - The Victron VE.Direct 1.8m cable is the interface you need to connect the Victron MPPT Control monitor to the controller itself and the BMV700 Battery Monitor to the Color Control GX along with other equipment to join them. 1.8 meter cable to connect Victron products using VE.Direct connectors. This 1.8m cable allows you to connect your Victron products and monitor all your data.

1 x VE.Can to CAN-bus BMS Type A 1.8m Victron: is for connecting CAN-Bus enabled batteries to non-Victron brands. to the Victron system. This model is compatible with BYD B-Box, Pylontech US2000C/US3000C/Force-L. Autosolar offers both Type A and Type B, and 1.8m and 5m.

1 x LEGRAND Splitter Parallel connection 40A Modules: ideal for connecting solar panel cables to the splitter. From this point on, only two wires (one positive and one negative) can go to the charge controller. Get significant savings on cable meters.

1 x Waterproof Box 150×110×70mm: ideal for installing the Legrand energy distributor inside. Both 40A and 100A are available for large installations.

2 x WEIDMULLER PVStick Connectors – Most recommended if you don't have crimp tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and do not require tools to connect to the cable.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.

15 x Single Wire Cable 16 mm2 SOLAR PV ZZ-F Red: special for electrical installations. Halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial needs.

15 × 16 mm2 SOLAR PV ZZ-F Black Single Wire Cable: special for electrical installations. Halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial needs.

2 × 35 mm2 single-wire POWERFLEX RV-K Green Cable: 35 mm² Solid Green POWERFLEX RV-K Cables are specially designed for electrical installations. Low halogen power cable. Flexible cables designed to meet the most demanding industrial needs such as low voltage industrial connections, urban networks and indoor installations.

2 x 35mm2 Black POWERFLEX RV-K Single Wire Cable: the 35mm2 Black Unipolar POWERFLEX RV-K Cable is specially designed for electrical installations. Low halogen power cable. Flexible cables designed to meet the most demanding industrial needs such as low voltage industrial connections, urban networks and indoor installations.

2 x 35mm Cable Eye Terminal - 8mm Eye: used to crimp 35mm gauge cables and connect 8mm diameter screws.

1 x Single Wire Cable 50 mm2 POWERFLEX RV-K Red: special for electrical installations. Halogen-free power cable. It is a flexible power cable designed for the most demanding industrial needs, such as: low voltage industrial connections, urban networks, building installations.

1 × 50 mm2 Single Wire Cable POWERFLEX RV-K Black: special for electrical installations. Halogen-free power cable. It is a flexible power cable designed for the most demanding industrial needs, such as: low voltage industrial connections, urban networks, building installations.

2 x 50mm Cable Eye Terminal - 8mm Eye: used to crimp 50mm gauge cables and connect 8mm diameter bolts.