The Victron Smart Solar MPPT 100V 15A Regulator, maximizer that provides maximum performance in any panel of solar installations.

The Victron Smart Solar MPPT 100V 15A Regulator is capable of charging a battery with a charge current of up to 15A and admits a voltage in photovoltaic panels of up to 100V.

What is a charge controller? And how is an MPPT controller different?

The Victron Smart Solar MPPT 100V 15A Regulator is capable of charging a battery from photovoltaic panels. You need a solar voltage higher than the nominal battery voltage to be able to carry out this process.

The Victron Smart Solar MPPT 100V 15A Regulator automatically adjusts the nominal voltage of the battery to 12 or 24V, although thanks to its Bluetooth interface, we can select it manually, as well as set charging parameters based on our needs.

Thanks to the Victron Smart Solar MPPT 100V 15A Regulator, we can use 24V or 60 cell panels to charge 12V batteries without any problem or loss of energy. The regulator will increase the charging intensity by reducing the voltage so as not to lose a single watt (W) of power.

As it is an MPPT regulator, when the weather conditions are adverse, even with clouds or rain, the intensity of the light changes continuously, with the Victron Smart Solar MPPT 100V 15A Regulator we can adapt to the new situations that arise at all times a fast and efficient way to get the most out of the solar panel in any situation.

Advanced maximum PowerPoint detection MPPT Smart Solar 100V 15A VICTRON

When the light intensity is not constant, the Victron Smart Solar MPPT 100V 15A Controller improves energy collection by up to 30% compared to a PWM controller and even 10% compared to other MPPT controllers.

It incorporates an algorithm to always maximize energy collection, reaching the optimum maximum PowerPoint for that moment, thanks to which the Victron Smart Solar MPPT 100V 15A Regulator has an exceptional conversion efficiency.

Technical characteristics MPPT Smart Solar 100V 15A VICTRON

- Photovoltaic power limitation for 12V battery: 220W, for 24V: 440W.

- Maximum voltage of the photovoltaic open circuit: 100V.

- No fan. Maximum efficiency of 98%.

- Own consumption of 10mA.

- Working temperature between -30 and +60ºC. Full output current up to 40°C. IP43 protection and IP22 connectors

- Reverse polarity protection of batteries (fuse) and PV panels.

- Protection against overheating, power reduction due to excess temperature.

- Compatible with VE. Direct for communications.

- 0.65Kg in weight and dimensions of 100x113x60mm.

- Built-in Bluetooth for configuration and monitoring with real-time and historical data.