The Blue Solar MPPT 100/50 charge regulator, controller with charge current up to 50A and panel voltage up to 100V. It has maximum power.

The VICTRON Blue Solar 100V 50A MPPT Controller is capable of reaching a charge current of up to 50A and a photovoltaic panel voltage of up to 100V.

What is a charge controller? And how is an MPPT controller different?

The VICTRON Blue Solar 100V 50A MPPT Controller is capable of charging a battery with a lower rated voltage from photovoltaic panels with a higher rated voltage.

The VICTRON Blue Solar 100V 50A MPPT Regulator automatically adjusts the nominal voltage of the battery to 12 or 24V, that is, we should not worry if we have a solar installation with 12V or 24V batteries, since the Blue Solar 100V 50A MPPT Regulator VICTRON will be able to detect it automatically.

When the weather conditions are adverse, with clouds or rain, the intensity of the light changes continuously, with the VICTRON MPPT Blue Solar 100V 50A Controller we can adapt to new situations that arise at all times quickly and efficiently.

Advanced maximum PowerPoint detection MPPT Blue Solar 100V 50A VICTRON

When the light intensity is not constant, the VICTRON Blue Solar 100V 50A MPPT Controller improves energy collection by up to 30% compared to a PWM controller and even 10% compared to other MPPT controllers. It incorporates an algorithm to always maximize energy collection, reaching the optimal maximum PowerPoint for that moment.

The VICTRON Blue Solar 100V 50A MPPT Controller has exceptional conversion efficiency.

MPPT Blue Solar 100V 50A VICTRON charging output

When we have consumption in direct current, we can use the load output that incorporates the MPPT Blue Solar 100V 50A VICTRON controller. This incorporates short circuit protection and will protect the battery from deep discharge by cutting off the supply to that connection.

Technical characteristics MPPT Blue Solar 100V 50A VICTRON

- Photovoltaic power limitation for 12V battery: 700W (MPPT range 15 and 70V) and for 24V: 1400W (MPPT range 30 and 70V).

- Maximum voltage of the photovoltaic open circuit: 100V.

- No fan. Maximum efficiency of 98%.

- Own consumption of 10mA.

- Working temperature between -30 and +60ºC. Full output current up to 40°C. IP43 protection and IP22 connectors

- Reverse polarity protection of batteries and PV panels (fuse not accessible).

- Protection against overheating, power reduction due to excess temperature.

- Short-circuit protection at the input of PV panels.

- VE compatible. Direct for communications.

- 1.25Kg weight and dimensions of 130x186x70mm.

- There is a version with integrated Bluetooth for an additional €30 with which all regulator parameters can be monitored and configured from the mobile phone.