The THERMIKO AI 500 model Inertia Accumulator for heating and cooling, are inertia accumulators built in carbon steel.
The THERMIKO AI 500 model Inertia Accumulator is an inertia tank for heating and cooling, built in ST37-2 pickled carbon steel.
The assembly is carried out vertically with suitable tanks for the accumulation of hot and cold water, for refrigeration and heating systems. These inertia connections have a drain/safety valve/probes and with gray enameled sheet metal.
Technical Description of The Inertia Accumulator model THERMIKO AI 500
General characteristics:
- 500 liter buffer tank.
- Made of carbon steel, prepared for installations on vertical floors.
- Suitable to be installed indoors and outdoors. In case of external mounting, the accumulator must be protected from inclement weather.
- Height-adjustable legs allow leveling.
- Possibility of adding electrical resistance.
Technical characteristics:
- Maximum accumulator pressure: 6 bar.
- Working range: -10º C to 100º C.
- Exterior finish: White lacquered galvanized steel.
- Insulation: Injected rigid polyurethane. Thickness 50 mm. Density 42 kg/m3.
- Diameter: 700mm.
- Height: 1910mm.
- Empty weight 95 kg.
- Boiler material: ST37-2 pickled carbon steel.
