Solar equipment with 3cv mono or three-phase 230v pump

Product no.: KIT-BOMBA-3CV
3,979.00

Tax included and free shipment to spain



If we add solar panels to the solar equipment with a 3cv mono or three-phase 230v pump, we add hours of irrigation or use of the pump.

 

The direct solar pumping kit without batteries, is valid to operate a pump of up to 3cv single-phase or three-phase 230v and with a generator or light input to power the system also on cloudy days. The direct solar pumping kit has IP 65 protection and inputs with solar connectors for easy mounting.

The solar kit for pumping up to 3 hp works like this:

  • The solar pumping kit for single-phase or three-phase 230v pumps up to 3hp allows the use of energy from solar panels to run a pump up to 3hp. The 3cv INVT pumping panel starts and operates the pump when solar energy is available.
  • Using this direct solar pumping kit we can run a 3cv pump for up to 5 hours a day in summer months at full 50Hz performance. Calculated for a central area of ​​Spain.

Equipo_solar_con_bomba_de_3cv_mono_o_trifasica_230v

Direct solar pumping kit is expandable
With this direct solar pumping kit we can add more solar panels if we want to increase the hours of irrigation or use of the pump. using 4 more panels we can reach 8 hours of daily operation at 50Hz
The pumping panel allows the use of pumps up to 3cv.

Components of the solar kit for direct pumping up to 2 hp

  • 14 340w PERC CSUN solar panels: It is a high efficiency polycrystalline solar panel, it has a high transmission of electricity thanks to its 5 bus bar connections in the cells. The PERC cells of the module are a dielectric layer that allows to take advantage of radiation that before it ended in the last layer of aluminum of the panel. By taking advantage of it to increase power, we reduce the heat that is transmitted to this last layer in a conventional cell and improve performance. CSUN is a TIER 1 manufacturer with a high quality in the production processes of its solar panels.
  • Invit 3cv pump controller: It is a control panel for single-phase and three-phase 230v pumps with a maximum power of 3cv). It has a screen for viewing and adjusting the pumping parameters, it also has different inputs for well probes to stop and start the pump depending on the level conditions. It has an input to use an alternative source such as a generator or 230v light.
  • Structure for 14 panels 30º floor or roof: In the kit we include an aluminum structure for photovoltaic modules with a 30º inclination prepared to be installed on the ground or on metal sandwich-type roofs. The structure comes with all the hardware for assembly and the instruction manual with a detailed plan.
  • Solar cabling and connectors: The kit includes 40 meters of 6mm unipolar RV-K solar cable for connecting the panels to the controller and the pump, as well as a set of Pv stick mc weidmuller connectors for easy mounting.

 

 

Browse these categories as well: Water pumping solar kit, Full catalogue