The Grid Inverter Fronius Primo 6.0 - 1 Light have an IP65 degree of protection and snapinverter technology.
The Fronius Solar Inverter from the Primo series is a grid connection inverter without a transformer that allows the synchronization of the solar installation with the electrical grid.
All the models of the Fronius Primo series incorporate two and have an IP65 degree of protection. The Primo Lite/Light solar inverter models do not include Wlan communications for remote management and monitoring. The Primo series solar inverters have a standard interface to the internet via a Wlan or easy to integrate Ethernet cable. The Fronius Primo include datamanager and free connection to the solarweb portal.
Fronius solar inverters have a zero grid injection system which allows us to reduce the power of the inverter to prevent energy from being poured into the grid in the event that the solar installation produces more electricity than is being consumed.
The main advantages of the Fronius Primo series are:
- SnapInverter technology: The primo solar inverter is attached to the fixed wall bracket. In case of service it is not necessary to remove the entire inverter, but only the power stage to access the interior of the device. All wiring is kept in place to be able to handle the inverter wiring quickly and easily
- Integrated Data Communication: The Primo inverter can be connected to the internet via WLAN, ethernet without the need for additional modules. It can be connected via Modbus TCP SunSpec, Modbus RTU SunSpec or the Fronius Solar API (JSON).
- Smart Grid Ready: The Fronius solar inverter of the Primo series is ready to connect to smart grids so that they can remotely control the active and reactive energy injected into the grid.
TECHNICAL DATA FRONIUS PRIMO
DATA IMPUT |
PRIMO 5.0-1 |
PRIMO6.0-1 |
PRIMO 8.2-1 |
Number of MPP followers |
2 |
Max input current (Idc max 1/ Idc max 2) |
12A/12A |
18A/18A |
Maximum short circuit current of MPP1/MPP2 (Isc pv) * |
24 A / 24 A |
36A/36A |
DC input voltage range (Udc min. - Udc max.) |
80 - 1000 V |
Commissioning voltage (start Udc) |
80 V |
MPP voltage range |
80 - 800 V |
Number of DC inputs |
2 + 2 |
Max PV generator output (Pdc max.) |
7,5 kWpico |
9,0 kWpico |
12,3 kWpico |
OUTPUT DATA |
PRIMO 5.0-1 |
PRIMO 6.0-1 |
PRIMO 8.2-1 |
Rated AC power (Pac,r) |
5.000 W |
6.000 W |
8.200 W |
maximum power output |
5.000 VA |
6.000 VA |
8.200 VA |
AC output current (Iac nom.) |
21,7 A |
26,1 A |
35,7 A |
Grid coupling (voltage range) |
1 ~ NPE 220 V / 230 V (180 V - 270 V) |
Frequency (frequency range) |
50 Hz / 60 Hz (45 - 65 Hz) |
Nonlinear distortion coefficient |
< 3 % |
Power factor (cos φac,r) |
0,85 - 1 ind. / cap |
GENERAL DATA |
PRIMO 5.0-1 |
PRIMO 6.0-1 |
PRIMO 8.2-1 |
Dimensions (height x width x depth) |
645 x 431 x 204 mm |
Weight |
21,5 kg |
protection type |
IP 65 |
protection class |
1 |
Overvoltage category (DC / AC) 1) |
2 / 3 |
nocturnal consumption |
< 1 W |
investor concept |
without transformer |
Refrigeration |
Regulated air cooling |
Facility |
Indoor and outdoor installation |
Ambient temperature range |
-40 - +55 °C |
Permissible air humidity |
0 - 100 % |
maximum altitude |
4.000 m |
DC connection technology |
4x X+ and 4 x DC screw terminals 2.5 - 16 mm² |
Main connection technology |
CONNECTION 3-pole AC screw terminals 2.5 - 16 mm² |
Certificates and compliance |
DIN V VDE 0126-1-1/A1, IEC 62109-1/-2, IEC 62116, IEC 61727,
AS 4777-2, AS 4777-3, G83/2, G59/3, CEI 0-21, VDE AR N 4105 2)
|
Country of manufacture |
Austria |
PERFORMANCE |
PRIMO 5.0-1 |
PRIMO 6.0-1 |
PRIMO 8.2-1 |
Maximum performance |
98,1 % |
98,1 % |
98,1 % |
European Yield (ηEU) |
97,1 % |
97,3 % |
97,5 % |
MPP Fitting Performance |
> 99,9 % |
SAFETY EQUIPMENT |
PRIMO 5.0 |
PRIMO 6.0-1 |
PRIMO 8.2-1 |
DC insulation measurement |
Yes |
Overload behavior |
Duty point displacement, power limitation |
DC disconnector |
Yes |
Reverse polarity protection |
Yes |
INTERFACES |
PRIMO 5.0-1 |
PRIMO 6.0-1 |
PRIMO 8.2-1 |
WLAN / Ethernet LAN |
Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON) |
6 inputs and 4 digital inputs/outputs |
Wave Control Receiver Interface |
USB (Conector A) 2) |
Datalogging, inverter update via USB |
2 RJ 45 connectors (RS422) 2) |
Fronius Solar Net |
Warning output 2) |
Energy management (potential free relay output) |
Datalogger and web server |
Including |
External input 2) |
S0-Meter / Input interface for overvoltage protection |
RS485 |
Modbus RTU SunSpec or meter connection |
1) According to IEC 62109-1.
2) Also available in the light version.