Grid inverter Fronius Primo 8.2 - 1 Light is a grid-connected, single-phase, transformer-free inverter.
Characteristics of the Grid Connection Inverter FRONIUS Primo 8.2-1 light 8.2kW
The FRONIUS Primo 8.2-1 light 8.2kW Grid-Connection Inverter is a single-phase, transformer-free grid-connected inverter.
Primo grid connection inverters that have the name “Light” are those that do not have the WLAN communication module installed to be able to view the inverter data over the Internet, those inverters that do not have the name “Light” do they have incorporated
Applications and features of the FRONIUS Primo 8.2-1 light 8.2kW Grid Connection Inverter:
The FRONIUS Primo 8.2-1 light 8.2kW Grid Connection Inverter is a single phase grid connection inverter. All Primo models incorporate two MPPT and have IP65 protection, but the light variants lack Wlan communications for remote monitoring and management. It is ideal to meet the needs of any home.
Primo models have a standard internet interface via Wlan or Ethernet and easy integration with components from other manufacturers, including data manager and free connection to the solarweb portal.
It has a Meter interface that allows dynamic power management and consumption display.
The FRONIUS Primo 8.2-1 light 8.2kW Grid Connection Inverter is an inverter that allows us to interconnect with the electrical grid without the need for batteries, which is why this type of installation is economical and very profitable in the long term, given its low cost from a simple installation and with few electronic devices that make the system more expensive.
For a grid connection installation to work correctly, we will need a group of solar panels, previously calculated to suit the needs of each case, and a grid connection inverter, which will allow us to transform energy from the solar panels to be able to make use of it
Fronius inverters have a zero grid injection system, this means that in the event that the solar installation is producing more energy than the home or industrial building is consuming, the zero injection system will allow us to reduce at will the power of the inverter only in the event that there is an energy surplus.
In short, the functionality of zero injection systems is to reduce the power of the inverter when the energy produced is greater than the energy consumed, thus preventing it from being discharged into the general electrical network.
TECHNICAL DATA FRONIUS PRIMO
DATA IMPUT |
PRIMO 5.0-1 |
PRIMO6.0-1 |
PRIMO 8.2-1 |
Number of MPP followers |
2 |
Max input current (Idc max 1/ Idc max 2) |
12A/12A |
18A/18A |
Maximum short circuit current of MPP1/MPP2 (Isc pv) * |
24 A / 24 A |
36A/36A |
DC input voltage range (Udc min. - Udc max.) |
80 - 1000 V |
Commissioning voltage (start Udc) |
80 V |
MPP voltage range |
80 - 800 V |
Number of DC inputs |
2 + 2 |
Max PV generator output (Pdc max.) |
7,5 kWpico |
9,0 kWpico |
12,3 kWpico |
OUTPUT DATA |
PRIMO 5.0-1 |
PRIMO 6.0-1 |
PRIMO 8.2-1 |
Rated AC power (Pac,r) |
5.000 W |
6.000 W |
8.200 W |
maximum power output |
5.000 VA |
6.000 VA |
8.200 VA |
AC output current (Iac nom.) |
21,7 A |
26,1 A |
35,7 A |
Grid coupling (voltage range) |
1 ~ NPE 220 V / 230 V (180 V - 270 V) |
Frequency (frequency range) |
50 Hz / 60 Hz (45 - 65 Hz) |
Nonlinear distortion coefficient |
< 3 % |
Power factor (cos φac,r) |
0,85 - 1 ind. / cap |
GENERAL DATA |
PRIMO 5.0-1 |
PRIMO 6.0-1 |
PRIMO 8.2-1 |
Dimensions (height x width x depth) |
645 x 431 x 204 mm |
Weight |
21,5 kg |
protection type |
IP 65 |
protection class |
1 |
Overvoltage category (DC / AC) 1) |
2 / 3 |
nocturnal consumption |
< 1 W |
investor concept |
without transformer |
Refrigeration |
Regulated air cooling |
Facility |
Indoor and outdoor installation |
Ambient temperature range |
-40 - +55 °C |
Permissible air humidity |
0 - 100 % |
maximum altitude |
4.000 m |
DC connection technology |
4x X+ and 4 x DC screw terminals 2.5 - 16 mm² |
Main connection technology |
CONNECTION 3-pole AC screw terminals 2.5 - 16 mm² |
Certificates and compliance |
DIN V VDE 0126-1-1/A1, IEC 62109-1/-2, IEC 62116, IEC 61727,
AS 4777-2, AS 4777-3, G83/2, G59/3, CEI 0-21, VDE AR N 4105 2)
|
Country of manufacture |
Austria |
PERFORMANCE |
PRIMO 5.0-1 |
PRIMO 6.0-1 |
PRIMO 8.2-1 |
Maximum performance |
98,1 % |
98,1 % |
98,1 % |
European Yield (ηEU) |
97,1 % |
97,3 % |
97,5 % |
MPP Fitting Performance |
> 99,9 % |
SAFETY EQUIPMENT |
PRIMO 5.0 |
PRIMO 6.0-1 |
PRIMO 8.2-1 |
DC insulation measurement |
Yes |
Overload behavior |
Duty point displacement, power limitation |
DC disconnector |
Yes |
Reverse polarity protection |
Yes |
INTERFACES |
PRIMO 5.0-1 |
PRIMO 6.0-1 |
PRIMO 8.2-1 |
WLAN / Ethernet LAN |
Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON) |
6 inputs and 4 digital inputs/outputs |
Wave Control Receiver Interface |
USB (Conector A) 2) |
Datalogging, inverter update via USB |
2 RJ 45 connectors (RS422) 2) |
Fronius Solar Net |
Warning output 2) |
Energy management (potential free relay output) |
Datalogger and web server |
Including |
External input 2) |
S0-Meter / Input interface for overvoltage protection |
RS485 |
Modbus RTU SunSpec or meter connection |
1) According to IEC 62109-1.
2) Also available in the light version.