Stainless steel heat recovery unit with ECOHOT 1-IN-R heating element harnesses the heat from your fireplace to warm your living room.
AIR HEATER FOR FIREPLACE, STAINLESS STEEL PAINT, WITH RESISTANCE, SMALL SIZE
The fireplace fan heater provides you with maximum economy, taking advantage of heat losses to the fireplace, converting it into valuable heat in your space with little firewood.
Its portable construction and easy installation make it a useful tool in your hands.
It is made of Φ42 AISI 304 stainless steel tube providing maximum heat resistance.
Top Uses
-
Distribute Fireplace Heat Efficiently
Place it at the chimney outlet to redirect hot air that would otherwise escape upward—keeping your living room warmer for longer.
-
Boost Heating Efficiency
By recycling leftover heat, your fireplace works less to reach your comfort temperature—meaning lower fuel consumption and higher savings.
-
Perfect for Living Rooms & Large Areas
Ideal for heating open spaces or rooms up to 45 m², ensuring a cozy atmosphere without turning up the heat.
-
Even Out Room Temperature
Move warm air from the fireplace to adjacent rooms or cold corners to eliminate uneven temperatures and cold spots.
-
Portable and Easy to Install
With its lightweight (≈ 18 kg) and adjustable design, you can set it up quickly without major renovations—ideal for seasonal or temporary use.
Advantages & Benefits
-
Energy Savings: Reuses wasted chimney heat to reduce firewood or fuel use, cutting both energy bills and environmental impact.
-
Premium Build Quality: Made from AISI 304 stainless steel, resistant to heat and corrosion for long-term durability.
-
Quick Installation: Adjustable length (50 – 77 cm) makes it easy to fit existing fireplaces—no complex setup needed.
-
Silent and Efficient Operation: A 290 m³/h airflow powered by a 62 W motor delivers strong, quiet performance.
-
Enhanced Comfort: Enjoy an evenly heated room and a pleasant temperature without hot-and-cold zones.
-
Certified Safety and Quality: CE certified and manufactured under ISO 9001 standards for peace of mind.
Technical Specifications
-
Airflow: 290 m³/h
-
Fan speeds: 2
-
Power consumption: 62 W
-
Heating capacity: ≈ 45 m²
-
Resistance: 2,000 Ω
-
Weight: ≈ 18 kg
-
Dimensions: Width ~ 50 cm | Length adjustable 50–77 cm | Height ~ 47 cm
-
Material: Stainless steel AISI 304
-
Certifications: CE | ISO 9001
Recommendations for Use
-
Install the unit right at the fireplace outlet to capture the maximum heat.
-
Keep your chimney clean and well-maintained for optimal airflow.
-
Check that the adjustable tube fits your chimney (50–77 cm) to avoid leaks.
-
Use only with standard domestic fireplaces—avoid corrosive or non-compatible fuels.
-
Periodically inspect the exterior temperature and clean the fan area to maintain peak performance.
-
Switch it off when not using the fireplace to save electricity.
Frequently Asked Questions
1. Can it be installed on any fireplace?
Yes! As long as your chimney allows access to the hot airflow and fits the 50–77 cm adjustable tube. Always measure before installation.
2. Does it require maintenance?
Minimal—just clean the fan area and chimney once or twice per year to keep it running efficiently.
3. Is electricity consumption high?
Not at all. It only consumes 62 W, far less than most heating devices—and helps you save fuel costs, too.
4. Can it heat very large or open-plan rooms?
It’s ideal for spaces up to 45 m². For larger rooms, you may combine it with another heat source for best results.
5. Is it safe and certified?
Absolutely. It’s CE-certified, built with AISI 304 stainless steel, and produced under ISO 9001 standards for quality and safety.
If you need more information, please do not hesitate to contact us: Contact
Operating characteristics: motor
- Size: 290 m³/hour
- Rates: 2
- Power: 62W
- Power level: kW/h
- Heating capacity: 45 m2.
- Thermostat-Filter: NO
- Resistance: 2,000 Ω
- Weight: 18 kilos
- Size: 50 cm, Size: 50-77 cm, Height: 47 cm
