With the 410w 24V Csun Mono Perc Solar Panel you will have energy all day without producing pollution.

The 410 W Csun Mono Perc Solar Panel will help us to have energy by supporting the care of the environment, reducing the generation of polluting gases. The panel is split cell. It is a last generation panel with a 20.4% efficiency in the module and the advantages of split cell technology in managing partial shading and improving temperature dissipation. CSUN is a TIER 1 manufacturer with more than 15 years of experience and 9 factories around the world. Its annual production is more than 2GW. Csun 400w 144 Mono perc solar panel has one of the highest efficiencies on the market.

The Csun 410 W mono perc Solar Panel has new split cell technology that improves the performance of the photovoltaic system in many aspects, here we can see the main ones:

• Reduction of thermal resistance: Thanks to the use of the split cell, the current that circulates through the panel is divided into two parts and the losses due to thermal resistance decrease. Simply with this configuration change in the panel we have a gain of up to 10w compared to a conventional module.
• Panel temperature decrease: Split cells have better heat dissipation compared to a conventional cell, so there is also a lower possibility of having a hot spot in the future. In addition, Perc technology, thanks to the use of the reflection, further reduces losses due to temperature.
• Better performance in shadows: Because the panel is divided into two chains connected to each other in parallel, if we have the effect of a partial shading, half of the panel continues to work, so we reduce losses considerably.
• MBB technology: The multi bus bar of its cells has the advantage of reducing electrical resistance by limiting the distance between the electrical current transfer of the conductors. The gain is between 5 and 10w per solar panel and the chances of having defects such as "microcracks" decrease significantly.

Csun Panels obtain the highest score in the DNV GL test.- DNV GL certification is among the most prestigious independent laboratory tests to demonstrate the qualities of solar panels. Among others, tests of degradation, thermal cycle and resistance to heat and humidity are carried out. Csun obtains the first positions in numerous tests together with manufacturers of recognized prestige.

Charge regulators for CSUN 410w panels

• Mono perc split cell Csun 410 W panels have very similar electrical characteristics to 72 cell panels. In fact, although the panel is made up of 144 split cells, in reality, being in two strings in parallel, we have 144/2 = 72 cells.
• The charge regulators that we can use with these panels are therefore the same as with the 72-cell panels. We recommend using mppt for its higher performance and to take full advantage of the features of the high-performance Csun board.
• Pwm regulators can be used with these panels in 24 and 48 volt systems although we must consider that the technology of these panels increases the voltage slightly compared to a standard 72 cell panel. It is necessary to check the maximum admissible voltages by the pwm and mppt regulators for a correct connection without exceeding the limits.

Solar Panel  de 410 W Csun Mono Perc Datasheet