With the 230v single-phase or three-phase solar pumping equipment, a 0.75 hp pump will work up to 6 hours a day in summer.

Direct solar pumping equipment without batteries. Valid to operate a pump up to 0.75cv single-phase or three-phase 230v and with generator or light input to power the system also on cloudy days. The direct solar pumping kit allows operation with only 4 solar panels thanks to its internal voltage booster. Up to 5 hours a day at 50Hz of operation.

Operation of the solar pumping kit up to 0.75 hp

• The solar pumping kit for single-phase or three-phase 230v pumps up to 0.75hp allows the use of energy from solar panels to operate a pump of up to 0.75hp. The INVT 0.75hp pumping panel starts and operates the pump when solar energy is available.
• Through this direct solar pump kit we can run a 0.75 hp pump for up to 6 hours a day in summer months at full 50Hz performance. Calculated for a central area of ​​Spain.

Direct solar pumping kit is expandable
With this direct solar pumping kit we can add more solar panels if we want to increase the hours of irrigation or use of the pump. Using 2 more panels we can reach 8 hours of daily operation at 50Hz. The pumping panel allows the use of pumps up to 0.75kw.

Components of the solar kit for direct pumping up to 0.75 hp

• 4 solar panels 340w PERC CSUN: It is a high efficiency polycrystalline solar panel, it has a high transmission of electricity thanks to its 5 bus bar connections in the cells. The PERC cells of the module are a dielectric layer that allows to take advantage of radiation that before it ended in the last layer of aluminum of the panel. By taking advantage of it to increase power, we reduce the heat that is transmitted to this last layer in a conventional cell and improve performance. CSUN is a TIER 1 manufacturer with a high quality in the production processes of its solar panels.
• Invert 0.75cv pump controller: It is a control panel for single-phase and three-phase 230v pumps with a maximum power of 0.75cv). It has a screen for viewing and adjusting the pumping parameters, it also has different inputs for well probes to stop and start the pump depending on the level conditions. It has an input to use an alternative source such as a generator or 230v light.
• Structure for 4 panels 30º floor or roof: In the kit we include an aluminum structure for photovoltaic modules with 30º inclination prepared to be installed on the ground or on metal sandwich-type roofs. The structure comes with all the hardware for assembly and the instruction manual with a detailed plan.
• Solar wiring and connectors: The kit includes 20 meters of 6mm unipolar RV-K solar cable for connecting the panels to the controller and the pump, as well as a set of easy-to-mount Pv stick mc weidmuller connectors.