The Isolated Housing Solar Kit 2000W 24V 6400Whdia, a suitable system for a small energy system, ideal for summer.

Characteristics of the Solar Kit system Isolated House 2000W 24V 6400Whdia

The photovoltaic system provided in the attached file can generate 4.86 kWh per day in winter (3 hours of sunshine) and 11.34 kWh in summer (7 hours of sunshine).

The characteristics of the proposed system are the following:

• Installed solar generation: 1,620 W
• Maximum output power to the box: 2000VA
• Daily production in winter: 4.86 kWh
• Summer: daily production: 11.34 kWh
• Annual average daily production: 8.10 kWh

Components of the Solar Kit Isolated House 2000W 24V 6400Whdia

4 x 405W Deep Blue 3.0 JA Solar Mono Solar Panel:  has very particular characteristics. It contains half cells that offer very high efficiency with 405W of power. It has PERC technology and is from the world-renowned manufacturer JA Solar.

1 x Structure 4 Panels 30-45mm Coplanar Falcat: It is a support to be able to place four solar panels on a roof that has a correct inclination and orientation. The panels are placed vertically on the structure, and this will have the same inclination as the surface to which it is installed. In this case, the structure is designed for panels of any length and has universal clamps that accept a panel profile of between 30 and 45mm. It is the perfect type of structure for roofs with metal decks, sandwich panels or concrete slabs. This product is shipped in a single pack and can be joined to more of the same structures using the corresponding joining kit.

4 x 6V 600Ah Tensite OPzS Stationary Battery: contains tubular plates that offer very high performance and at the best price. It is perfectly indicated for medium-sized photovoltaic installations. It is a battery with long life and excellent discharge characteristics. You can only find it at AutoSolar.

1 x VICTRON Blue Solar 100V 50A MPPT Regulator: It is a controller with a charge current of up to 50A and a voltage of up to 100V. In addition, the Blue Solar MPPT 100/50 charge controller has ultra-fast Maximum PowerPoint Tracking (MPPT). The Blue Solar MPPT 100/50 charge controller has advanced detection of the maximum PowerPoint in the event of partial cloud cover. On the other hand, the BlueSolar MPPT 100/50 charge controller model offered by Autosolar.es has exceptional conversion efficiency, a flexible charging algorithm, reprogrammable auxiliary relay, as well as extensive electronic protection. It has a 5-year guarantee.

1 x Phoenix Smart 24V 2000VA Victron Energy Inverter: Ideal for solar installations. Victron inverters are used together with batteries, so the most recommended is to install as close as possible, to minimize the loss of voltage through the cables. The Victron Inverter is recommended to be installed in an area where it is not exposed to direct sunlight. Inverters warranty is 2 years.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

Unifilar Cable Roll 6mm2 H1Z2Z2-K 10m black
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Roll Unifilar Cable 10mm2 H1Z2Z2-K 10m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Roll Unifilar Cable 10mm2 H1Z2Z2-K 10m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Unifilar Cable 50 mm² POWERFLEX RV-K Red: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements, such as low voltage industrial connections, urban networks, installations in buildings.

1 x Unifilar Cable 50 mm² POWERFLEX RV-K Black: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements, such as low voltage industrial connections, urban networks, installations in buildings.

1 x Watertight Box 150×110x70mm: Perfect for installing the Legrand Current Distributor inside, both 40A and 100A for larger installations.

1 x LEGRAND 40A Module Parallel Connection Splitter: perfect for gathering the cables coming from the solar panels and connecting them to the splitter. From this moment, we can go with only 2 cables (1 positive and 1 negative) to the charge regulator. Produces significant savings in meters of wiring.

2 x WEIDMULLER PVStick Connectors: they are the most recommended in the case of not having a crimper to be able to connect the usual MC4 connectors. They are compatible with all connector models that are offered as standard in solar panels and do not require any type of tool to be able to assemble them on the cable.

4 x 50mm Cable Eye Terminal - 8mm Eye: Used to crimp 50mm section cables and make the connection on a 8mm diameter screw.

3 x Battery Interconnection Cable: it is made to measure with the requested terminals, depending on the diameter of the battery screw to which it is going to be connected. It has all the technical characteristics that allow the interconnection of batteries with total safety.