The Solar Kit Isolated Installation 3000W 24V 6000Whdia, system suitable for a small energy system, ideal for summer.

Characteristics of the Solar Kit system Isolated Installation 3000W 24V 6000Whdia

The photovoltaic system provided in the attachment can generate 4.86 kWh per day in winter (3 hours of sun) and 11.34 kWh in summer (7 hours of sun).

The characteristics of the proposed system are the following:

•   Installed solar generation: 1,620 W
•   Maximum output power to the box: 3000W
•   Daily production in winter: 4.86 kWh
•   Summer: daily production: 11.34 kWh
•   Annual average daily production: 8.10 kWh

Solar Kit Components Isolated Installation 3000W 24V 6000Whdia

4 x 405W Deep Blue 3.0 JA Solar Mono Solar Panel: The 405W Deep Blue 3.0 JA Solar Mono Solar Panel has very particular characteristics. It contains half cells that offer very high efficiency with 405W of power. It has PERC technology and is from the world-renowned manufacturer JA Solar.

1 x Structure 4 Panels 30-45mm Coplanar Falcat: It is a support to be able to place four solar panels on a roof that has a correct inclination and orientation. The panels are placed vertically on the structure, and this will have the same inclination as the surface to which it is installed. In this case, the structure is designed for panels of any length and has universal clamps that accept a panel profile of between 30 and 45mm. It is the perfect type of structure for roofs with metal decks, sandwich panels or concrete slabs. This product is shipped in a single pack and can be joined to more of the same structures using the corresponding joining kit.

2 x Blue 260Ah 12V Tensite Sealed Battery: Perfect option to power lighting, laptop, television, etc. Being a monoblock type, it has minimal maintenance. It is very easy to transport and install thanks to its compact design. 

1 x Must Solar 3000W 24V Inverter Charger Pre-Assembled with Guards - This is a pre-assembled kit containing the Must Solar 3000W 24V Isolated Inverter which provides up to 3000W of output power from a 24V battery. The inverter has an input for the solar panel and is used to supply power and charge the 24V battery. This energy passes through an internal MPPT type charge controller with a charging power of 50A and is used to boost the battery charge and make it ready for use. A 24V battery charger with a charging force of up to 30A is also included in case you need to charge the battery using a compatible generator or external power source. The entire set is pre-assembled and wired on a metal plate that can be easily hung on the wall. Simply connect the input of the solar panel to the corresponding input of the fuse that protects it, and connect the load to the output of the circuit breaker. The iron shield should be placed high enough so that the battery cables can reach the battery terminals well.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 5m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 5m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Roll Unifilar Cable 10mm2 H1Z2Z2-K 10m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Roll Unifilar Cable 10mm2 H1Z2Z2-K 10m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Watertight Box 150x110x70mm: Perfect for installing the Legrand Current Distributor inside, both 40A and 100A for larger installations. 

1 x 100A Modules Parallel connection distributor: Perfect for gathering the cables coming from the solar panels and connecting them to the distributor. From this moment, we can go with only 2 cables (1 positive and 1 negative) to the charge regulator. Produces significant savings in meters of wiring. 

1 x Interconnection Cable with Battery Terminals: Cable to interconnect monoblock batteries when used in 24V or 48V installations, or to double the amperage of the batteries if desired.

2 x WEIDMULLER PVStick Connectors: They are the most recommended in the case of not having a crimper to be able to connect the usual MC4 connectors. They are compatible with all connector models that are offered as standard in solar panels and do not require any type of tool to be able to assemble them on the cable. 

2 x 50mm Cable Eye Terminal - 10mm Eye: Used to crimp 50mm section cables and make the connection on a 10mm diameter screw.

1 x Set of Terminals with M10 nut: Contacts to connect and transmit power from a battery that incorporates metric 8 nuts.