The Victron BlueSolar 12/24V PWM-Pro 5A Regulator is an advanced solar charge controller for isolated installations.
Description of the Regulator PWM-Pro 5A Victron BlueSolar 12/24V
Victron's range of PWM-Pro BlueSolar regulators consists of charge regulators between 5A and 30A for 12 and 24V systems. These regulators have several characteristics of their own; however, the notable particularities are that they have a total programming capacity, although they do have optional devices such as the LCD screen or the communication cable with the PC.
Suitable for charging batteries in 3 stages (initial, absorption and float) as well as equalization depending on the type of battery that requires it. The consumption output has a button to be able to activate or deactivate it directly on the dimmer itself, although it can also be programmed as a luminaire or with an activation delay.
As additional qualities, the Victron BlueSolar 12/24V PWM-Pro 5A Regulator incorporates a series of protections such as against reverse polarity, to prevent short circuits, and to ensure battery integrity against charges and discharges outside safety limits.
It also incorporates a load output to connect direct current consumption to prevent the battery from being excessively discharged by connecting all the loads to the load output. This output will disconnect the load when the battery has been discharged to a preset voltage.
Some loads, especially inverters, must be connected directly to the battery, since we must not overload the intensity requested from the Victron PWM-Pro Regulator. The connection and disconnection voltage are adjustable through the programming of the product, with any of the optional accessories.
The Victron BlueSolar 12/24V PWM-Pro 5A Regulator also has day and night programming of the load output, this option allows the ON-time to be readjusted after twilight, optimizing the operation of the system. The battery charging algorithm is programmable, as stated above, for AGM, GEL and open lead acid batteries.
Installation and Start-up Regulator PWM-Pro 5A Victron BlueSolar 12/24V
It is recommended that the PWM-Pro 5A Victron BlueSolar 12/24V Regulator be installed by a professional or someone with basic knowledge in this regard, because although the configuration is simple, the instructions must be followed and the parameters programmed so that the PWM-Pro Regulator Pro 5A Victron BlueSolar 12/24V is compatible with the rest of the elements of the photovoltaic system.
In addition, you have to keep in mind its connection order, since you first have to connect the battery before anything else. Likewise, if we need to turn off the system, the battery is the last thing we need to turn off.
It is convenient that the PWM-Pro 5A Victron BlueSolar 12/24V Regulator be installed on a flat horizontal surface located indoors or in a place protected from high temperatures, direct sunlight or humidity that could interfere with its correct operation.
You can consult the installation manual along with the description of this product and if you have any questions, contact us and our technical team will advise you to regard your purchase of the PWM-Pro 5A Victron BlueSolar 12/24V Regulator.
