The Huawei SUN2000-5KTL-L1 5000W Inverter, a model prepared for self-consumption installations, between 2kW and 6kW of power.

Characteristics of the Huawei SUN2000-5KTL-L1 5000W Inverter

The Huawei SUN2000-5KTL-L1 5000W Inverter is a modern grid connection inverter prepared for the most advanced self-consumption installations. It represents an evolutionary leap compared to the previous generation, incorporating a series of improvements to keep up with other options on the market.

One of the great features of the outgoing model was its ability to work as a classic grid connection inverter, or it can also be supplemented with high-voltage LG batteries, from the RESU H range. In this case, that compatibility is still maintained, in addition to the ability to use the battery that Huawei is developing.

Thanks to this, we will be able to start with a much cheaper direct self-consumption installation without accumulation, so that in the future we can expand with the inclusion of a battery to reduce our dependence on the electricity grid. Now we can also choose a battery from more options, the current ones from LG of 7 and 10kWh and also the modular ones from Huawei to be able to reach up to 30kWh of capacity.

The Huawei SUN2000-5KTL-L1 5000W Inverter has, like the previous model, 2 MPPT trackers. This means that we can have 2 different orientations for our photovoltaic field without affecting the production of one over the other.

The Huawei SUN2000-5KTL-L1 5000W Inverter now offers a much wider range of operation, with a lower starting voltage. The working range of your regulator is between 90 and 560V, so with 4 panels of 60 cells it can be put into operation.

It has a high limit on its working voltage, so we can use any type of panel as long as we respect the ranges defined by the manufacturer. In addition, it should be noted that we will have a limitation in the maximum working voltage if we use an LG battery, which does not happen with the Huawei battery.

This inverter has an internal Wi-Fi antenna and thanks to it we will only need our smartphone to start it up, configure it and connect it wirelessly to our router. If we need wired connectivity or provide it with 4G connectivity, two accessories can be purchased to provide this type of connection to Huawei's online services.

This inverter is compatible with the single-phase Chint wattmeter and also with other Carlo Gavazzi models. To confirm compatibility with other wattmeters, contact us or consult the technical data sheet in each case.

The Huawei SUN2000-5KTL-L1 5000W Inverter offers high operating efficiency of more than 98% in any of its versions and has the best expansion capabilities at a competitive price.

It is a grid connection inverter, since it needs the grid to work and without it the inverter cannot provide energy. It is a hybrid inverter model thanks to its possibilities in self-consumption with batteries. It is not necessary to purchase any additional plug-ins to later add any of the compatible battery models.

Below is the efficiency curve of the Huawei SUN2000-5KTL-L1 5000W Inverter: 

Huawei SUN2000-5KTL-L1 5000W Inverter Applications

The Huawei SUN2000-5KTL-L1 5000W Inverter requires a connection to the electrical network in order to work. It injects into it the energy that the connected solar panels are capable of generating in real time. It is what is called a grid connection inverter.

To increase our proportion and ratio of self-consumption, if our consumption does not adjust to the hours of photovoltaic production, we have the possibility of storing the surplus production that is not used in a high-voltage lithium battery.

In this case, you have to be especially careful with the maximum working voltages, since in the case of using an LG accumulator, we cannot exceed 495V in open circuit. We do not have this restriction if the battery is not used, or the future battery that Huawei has to bring to the market is connected.

The Huawei SUN2000-5KTL-L1 5000W Inverter incorporates numerous internal electrical protections, including anti-island protection, polarity reversal, short circuits, overcurrent, overvoltage, overtemperature, and many more.

The Huawei SUN2000-5KTL-L1 5000W Inverter has an internal Wi-Fi connection, communications via RS485 and LED indicators on its front for easy start-up and monitoring of its operation.

The Huawei SUN2000-5KTL-L1 5000W Inverter communicates wirelessly with our mobile terminal to be able to start up and also to have detailed monitoring. Once we connect it to the internet, in the Huawei application and portal, we will have at our disposal all the information related to our installation.

Huawei SUN2000-5KTL-L1 5000W Inverter Connection 

1: Informative LED's section.
2: Inverter front casing.
3: Anchor kit.
4: Vertical hanger bracket.
5: Rear heat sink.
6: Vent valve.
7: Safety screw for the disconnector.
8: DC disconnector.
9: PV1 Photovoltaic Terminals.
10: PV2 Photovoltaic Terminals.
11: Battery terminals.
12: Port for GPRS/Ethernet dongle.
13: Antenna.
14: COM ports.
15: Alternate AC output.
16: Grounding.

Huawei SUN2000-5KTL-L1 5000W inverter installation

The installation of the Huawei SUN2000-5KTL-L1 5000W Inverter is very simple and easy, since thanks to its compact and lightweight design, the installation task is much easier.

The Huawei SUN2000-5KTL-L1 5000W Inverter has IP65 protection and does not have moving parts such as fans, so in addition to silent operation, it can be installed outdoors as long as it is not subjected to direct sunlight. Its cooling is by natural convection, which reduces the chances of failure in the ventilation system.

The installation of the Huawei SUN2000-5KTL-L1 5000W Inverter can be done by yourself, by someone you trust, or by the AutoSolar team of installers. If you opt for the latter option, we will inform you without any commitment.