Inversor Fronius Primo Gen24 4.0 Plus

Product no.: BET3932
1,999.00

Tax included and free shipment to spain



The Fronius Primo Gen24 4.0 Plus Inverter with Superflex design makes it simple and flexible.

 

 

with technology

INTEGRATED DATA COMMUNICATION

We are the first inverter manufacturer to offer a communications package with data logging, wireless WLAN connection, Ethernet, power management, a web server and numerous interfaces. Thus, the inverter connects to the Internet via a network cable or WLAN without the need for additional wiring and a perfect visualization of the operation of the PV installation is obtained. It can be connected to components from other manufacturers thanks to interfaces such as Modbus TCP SunSpec, Modbus RTU SunSpec or the Fronius Solar API (JSON). In addition, open interfaces can be used in parallel to Fronius Solar.web.

DYNAMIC PEAK MANAGER

The Dynamic Peak Manager is a novel GMPP intelligent tracking algorithm capable of dynamically adapting its behavior while searching for the optimum operating point. The particularity of the Dynamic Peak Manager is that it automatically checks the entire characteristic curve periodically and finds the maximum power point (GMPP), even in partial shading.

MULTI-FLOW TECHNOLOGY

Multi Flow Technology allows different DC and AC power flows in parallel. Thus, any home can have power from the modules and the battery at the same time. It is also possible to feed power from the modules to the battery and to the home network at the same time. Furthermore it is possible to charge the battery not only from the AC side but also from the DC side (eg from existing PV installations or from other energy sources a wind turbine). This means that the inverter can also be retrofitted with AC coupling. The inverter manages these energy flows to achieve the highest self-consumption rate.

SUPERFLEX DESIGN

The Fronius SuperFlex design combines all the technical requirements to make designing your PV system very easy and flexible. The most important factors of the SuperFlex design are the following: Two Maximum Power Point Trackers (MPPT) in combination with the high system voltage and the wide range of DC input voltage. Each direct current input, and therefore each MPP tracker, is capable of adapting to the nominal power of the inverter. The result is an inverter for every application. Thanks to the SuperFlex design, a single inverter can handle any challenge, including different roof orientations, shading one or two PV module strings, or using residual modules. A Fronius inverter with the integrated SuperFlex design allows you to cover any configuration situation with a single inverter model in terms of the company's PV planning practice.

FULL BACKUP*

With the "Full backup" option, all single-phase and three-phase devices in the home can continue to receive power in the event of a power outage. *The Full Backup option is only available for Primo GEN24 Plus versions from 3.0 to 6.0 Plus and Symo GEN24 Plus from 6.0 to 10.0.

PV POINT

The basic built-in emergency power function, a dedicated outlet to supply electricity in an emergency, ensures that important loads can continue to operate during power outages.

ACTIVE COOLING

Active cooling technology is based on one or more fans that not only prevent heat fields, but also regulate the air circulation inside the inverter, thus keeping the temperature of the power electronics low. This has a positive effect on the useful life of the devices, optimizes performance and reduces costs. At Fronius, Active Cooling is a technology standard in all devices.

Data Sheet

PRIMO GEN24 PLUS
Input Data
Models 3.0 3.6 4.0
Number of MPP followers   2
DC input voltage range (Udc min - Udc max) V 65-600
Rated input voltage (Udc,r) V 400
Commissioning voltage (start Udc) V 80
MPP voltage range V 65 - 530 65 - 530 65 - 530
    MPPT1 MPPT2 MPPT1 MPPT2 MPPT1 MPPT2
Max input current per MPPT (Idc max.) A 22 12 22 12 22 12
Maximum input current per MPPT (Idc max) A 36  19 36 19 36 19
Number of DC entries in the module field   2 2 2
    MPPT1 MPPT2 Total MPPT1 MPPT2 Total MPPT1 MPPT2 Total
Max DC power W 3110 3810 4140
Max PV generator output Wpico 3750 3110 4500 4600 3810 5520 5000 4140 6000

 

 

Output Data
Models 3.0 3.6 4.0
Rated AC power (Pac,r) W 3000 3680 4000
Apparent power VA 3000 3680 4000
Max output power VA 3000 3680 4000
    220 VCA 230 VCA 220VCA 230 VCA 220VCA VCA
AC output current nom. (@ 220 / 230V) A 13,6 13 16,7 16 18,2 17,4
Grid coupling (Uac,r) V 1~ NPE 220/230 (+20 %/-30 %)
Frequency (frequency range fmin - fmax) Hz 50/60 (45 - 65)
Nonlinear distortion coefficient % < 2 
Power factor (cos φac,r)   0,8 - 1 ind. / cap

 

Models 3.0 3.6 4.0
PV Point Output Data
Rated Output Power PV Point VA 3000 3600 4000
Coupling to the PV Point network V 1~ NPE 220/230
Transition time Seg. < 35

 

 

Models 3.0 3.6 4.0
Output Data Full Backup2
rated output power "Full Backup" VA 3000 3600 4000
Coupling to the grid "Full Backup V 1~ NPE 220/230
Transition time Seg. < 35

 

 

Models 3.0 3.6 4.0
Battery Connection
Number of DC inputs   1
Max input current (Idc max.) A 22
DC input voltage range (Udc min - Udc max)3 V 150-455
Battery DC connection technology   Quick connectors by pressure of 2.5-10 mm² (1 unit BAT+ and 1 unit BAT-)
Max DC input/output power 4 W 3110 3810 4140
Max load power with AC4 coupling W 3000 3680 4000
Compatible Batteries 5    BYD Battery-Box Premium HVS/HVM y LG RESU FLEX6
  1. Isc pv = Isc max. ≥ Isc (STC) x 1.25, according to, for example, IEC 60364-7-712, NEC 2020, AS/NZS 5033:2021
  2. The "Full Backup" option is available for Primo GEN24 from 3.0 to 6.0 Plus. For "Full Backup", additional external components are required for network switching. More detailed information can be found in the instruction manual.
  3. The inverter's AC derating occurs with a DC battery input voltage of 419.7V and higher.
  4. Depending on the connected battery.
  5. Depending on country-specific certification and availability 6 Except BYD Battery-Box Premium HVS 10.2, HVS 12.8, HVM 8.3, HVM 22.1 and LG RESU FLEX 17.2
Models 3.0 3.6 4.0
General data
Dimensions (height × width × depth) mm 530 X 474 X165
Weight (inverter / with packaging) kg 15,4/19 15,4/19 15,4/19
protection type   IP66
protection class   1
nocturnal consumption W < 10
Overvoltage category (DC/AC)7   2/3
investor concept   without transformer
refrigeration   Active Ventilation Technology
Facility   Indoor and outdoor installation
Ambient temperature range ºC -40a +60
Permissible air humidity % 0-100
noise emission dB (A) <42
Max altitude M 4000
DC PV connection technology   Quick connectors by pressure of 2.5-10 mm² (4 units CC+ and 4 units CC-)
AC connection technology   3-pole AC push-in quick connector 2.5-10 mm² 3-pole push-in quick connector for emergency power 1.5-10 mm² PE screw terminals (2 pieces 2.5-16 mm² and 3 pieces 2.5-10mm²)
Certificates and compliance 8   IEC 62109, IEC 62909, AS/NZS 4777.2, CEI 0-21, ABNT BNR 16149 y 16150, IEC 62116, IEC61727, G98/99
Emergency Power Features   "PV Point" o "Full Backup"
Country of manufacture   Austria
Life Cycle Analysis   According to ÖNORM EN ISO 14040 and 14044 (verified by staff of the Fraunhofer IZM Institute)

 

Models 3.0 3.6 4.0
Performance
Max performance % 97,6 97,6 97,6
European performance (ηEU) % 96,8 97,0 97,1
MPP Fitting Performance % >99,9 >99,9 >99,9

 

Models 3.0 3.6 4.0
Safety equipment
DC insulation measurement Integrated
Overload behavior Travel to duty point, power limitation
DC disconnector Integrated
Reverse polarity protection Integrated

 

Models 3.0 3.6 4.0
interfaces
WLAN/2 × Ethernet LAN Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON)

6 digital inputs

6 digital inputs/outputs

Wave control receiver interface, power management
Emergency stop (WSD) Integrated
Datalogger and web server Integrated
2 × RS485 Modbus RTU SunSpec (from another manufacturer) / Fronius Smart Meter, battery (GEN24 Plus), Fronius Ohmpilot

 

We also recommend

*
Tax included and free shipment to spain

Browse these categories as well: Hybrid solar inverters, Solar inverters, Full catalogue