The Solar Kit 3000W 24V 6000Whdia, energy consumption system for lighting and electrical equipment for sporadic use.

Characteristics of the Solar Kit 3000W 24V 6000Whdia system

The photovoltaic system provided in the attachment can generate 4.86 kWh per day in winter (3 sun hours) and 11.34 kWh in summer (7 sun hours).

The characteristics of the proposed system are the following:

• Installed solar generation: 1,620 W
• Maximum output power to the box: 3000W
• Daily production in winter: 4.86 kWh
• Summer: daily production: 11.34 kWh
• Annual average daily production: 8.10 kWh

Components of the Solar Kit 3000W 24V 6000Whdia

4 x 405W Deep Blue 3.0 JA Solar Mono Solar Panel:  has very particular characteristics. It contains half cells that offer very high efficiency with 405W of power. It has PERC technology and is from the world-renowned manufacturer JA Solar.

1 x Structure 4 Panels 30-45mm Coplanar Falcat: It is a support to be able to place four solar panels on a roof that has a correct inclination and orientation. The panels are placed vertically on the structure, and this will have the same inclination as the surface to which it is installed. In this case, the structure is designed for panels of any length and has universal clamps that accept a panel profile of between 30 and 45mm. It is the perfect type of structure for roofs with metal decks, sandwich panels or concrete slabs. This product is shipped in a single pack and can be joined to more of the same structures using the corresponding joining kit.

4 x ROLLS 6V S6 L16-HC S550 battery: It has a 2-year warranty plus a 5-year extendable warranty. They are special for solar energy, which means that they withstand slow discharges very well every day. They have an average life of about 1,500 cycles, understanding a cycle as a process of complete charging and discharging of the battery. It is highly recommended that the battery is not usually discharged more than 30% of its total capacity, since in this way we will extend its duration and we will be able to reach 8–10 years of estimated useful life. The battery connection bridges are included with them. To correctly connect the stationary battery, you have to join the different batteries with each other, as we will attach in the installation manual.

1 x Must Solar 3000W 24V Inverter Charger Pre-Assembled with Guards - This is a pre-assembled kit containing the Must Solar 3000W 24V Isolated Inverter which provides up to 3000W of output power from a 24V battery. The inverter has an input for the solar panel and is used to supply power and charge the 24V battery. This energy passes through an internal MPPT type charge controller with a charging power of 50A and is used to boost the battery charge and make it ready for use. A 24V battery charger with a charging force of up to 30A is also included in case you need to charge the battery using a compatible generator or external power source. The entire set is pre-assembled and wired on a metal plate that can be easily hung on the wall. Simply connect the input of the solar panel to the corresponding input of the fuse that protects it, and connect the load to the output of the circuit breaker. The iron shield should be placed high enough so that the battery cables can reach the battery terminals well.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 5m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 5m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Roll Unifilar Cable 10mm2 H1Z2Z2-K 10m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Roll Unifilar Cable 10mm2 H1Z2Z2-K 10m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.

1 x Watertight Box 150x110x70mm: Perfect for installing the Legrand Current Distributor inside, both 40A and 100A for larger installations.

1 x 100A Modules Parallel connection distributor: Perfect for gathering the cables coming from the solar panels and connecting them to the distributor. From this moment, we can go with only 2 cables (1 positive and 1 negative) to the charge regulator. Produces significant savings in meters of wiring.

2 x WEIDMULLER PVStick Connectors: They are the most recommended in the case of not having a crimper to be able to connect the usual MC4 connectors. They are compatible with all connector models that are offered as standard in solar panels and do not require any type of tool to be able to assemble them on the cable. 

3 x Battery Interconnection Cable: It is made to measure with the requested terminals, depending on the diameter of the battery screw to which it is going to be connected. It has all the technical characteristics that allow the interconnection of batteries with total safety.