Enjoy the advantages of solar energy for hot water, electricity or heating your pool. +34652 97 69 15 / +34 925 710 433
Tax included and free shipment to spain
SOLARTERMIC HIGH SELECTIVE photothermal collectors guarantee hot water independently, cleanly and free of charge, for more than 20 years even on cloudy or low radiation days.
The most efficient flat collectors on the market.
With an optical factor of 83.5% and thermal losses of 3.80 W / m2K and 0.009 W / m2K2, the SOLARTERMIC HIGH SELECTIVE collectors produce up to 1,400 KWh / m2 per year, becoming the maximum exponent of the market in this type of technology.
This is achieved thanks to:
|EQUIPMENT||150 TI||200 TI||300TI||450 TI|
|Nº de users||From 1 to 3||4||From 3 to 6||From 5 to 8|
|Nº of solar collector||1||2||2||2|
Flexibility and versatility
Up to 6 SOLARTERMIC HS 2.7 collectors can be connected in parallel, maintaining a uniform flow, thus becoming a single collector of 15.42 m2.
The SOLARTERMIC HS sensors and their accessories are specially designed to facilitate the quick and easy installation of them, guaranteeing maximum safety in adverse environmental conditions and any overpressure caused by steam boiling.
Composed of 4 clamps and 4 silicone O-rings High quality, 2 NPT female connectors with ¾ "thread and 2
Composed of two sleeves flexible stainless steel 4 clamps and 4 O-rings high quality silicone.
Each collector has a hole in contact with the absorber, especially indicated to house the temperature probe.
Maximum durability and protection to the outdoor
The collector frame is coated aluminum powder with a special treatment to get the maximum resistance in coastal areas.
The 0.4 mm thick back plate is made of Aluzinc high durability (7 times more resistant to corrosion than galvanized steel).
The compression and sealing materials used are made of high quality silicone and polyurethane, especially
designed for resistance to extreme temperatures and Water.
The transparent 3.2 mm cover is tempered glass anti-hail with low iron content.
Supports made of aluminum for inclined and flat roofs, light and easy to transport and install, as well as guaranteeing maximum protection against corrosion in saline environments such as coastal areas.
SOLARTERMIC solar packs are designed to facilitate the selection and installation of individual ACS solutions, including everything necessary for the execution of the same:
The Solartermic HS sensors and their accessories are specially designed to facilitate the quick and easy installation of them, guaranteeing maximum safety in adverse environmental conditions and any overpressure caused by steam boiling.
The Connection Kit consists of 4 clamps and 4 high quality silicon gaskets, 2 NPT female connectors with ros "thread and 2 plugs and the Union Kit consists of 2 flexible stainless steel sleeves, 4 clamps and 4 O-rings high quality silicone.
In addition each collector has a hole in contact with the absorber, especially suitable to house the temperature probe.