The Victron Multiplus Inverter 24V 800VA 16+16A, pure wave inverter. It also includes a charger with integrated transfer button.
Characteristics of the Victron Multiplus 24V 800VA 16+16A Inverter
The Victron Phoenix 24V / 220V 800VA 16+16A Sine Wave Inverter charger with MultiPlus function, in short, combines a powerful, perfectly pure sinusoidal wave inverter, in addition to having a battery charger that adapts according to the instantaneous requirements of the solar installation. The stability of its electrical wave allows us to feed the most delicate consumption without any problem.
What function does the Victron Multiplus 24V 800VA 16+16A Inverter have?
A Victron Multiplus 24V 800VA 16+16A Inverter has two well-differentiated parts: on the one hand, we have the inverter, which performs the typical functions of a conventional inverter through a reliable toroidal transformer, and, on the other hand, the charger.
This is in charge of being able to charge the battery from an alternate 230V power supply. Through the programmable relay, a remote generator can be activated to provide power when the battery is too low. When the mains input is available, the consumption of up to 16A is bypassed.
Technical aspects of the Victron Multiplus 24V 800VA 16+16A Inverter
Among the most notable features of the Victron Multiplus compact inverters, we can highlight:
- Relay programmable as alarm relay for functions such as low battery, high input ripple, temperature, etc.
- 3-pole Remote Connector.
- Great starting power to deal with peaks of up to, 1600VA of energy.
- Efficiency of 93%.
- Possibilities of parallel or three-phase operation with more identical units duly configured.
- PowerControl function to limit the load intensity from the 230Vac source and avoid generator overloads.
- PowerAssist function to deal with specific power requirements that the alternating current source is not capable of providing. In this case, it is supplemented by battery power.
- Four-stage variable charger with wide input voltage range. The Victron Multiplus 24V 800VA 16+16A Inverter provides a variable battery charging system that can be configured using the Victron software through the VE port. Bus.
Common uses of the Victron Multiplus 24V 800VA 16+16A Inverter
- Use as emergency UPS. The Victron Inverter can continuously power the loads from an unstable 230V power source, switching to battery power in the event of a mains failure. Once restored, it would take care of, leaving the full battery ready for use again.
- Use in boats, caravans and recreational vehicles. It can supply 800VA of consumption from a 24V bank and charge those batteries when a 230Vac power source is available.
- Thanks to its content size and weight, it can be used in small spaces. It incorporates a continuous control of the internal temperature to adapt the maximum output power depending on the environmental conditions.
Other relevant aspects of the Victron Multiplus 24V 800VA 16+16A Inverter
As we can see in the table above, the protections available to Victron's compact Multiplus inverter are of all kinds to cover any scenario. Built-in protections for power output short circuit, power overload, battery voltage too high or too low, over temperature, input ripple abnormal, etc.
The Victron Multiplus 24V 800VA 16+16A Inverter can also be configured at 60Hz and 240Vac to adjust to the characteristics of any electrical network.