PWM Controller BlueSolar 12/24V 5A LCD USB Victron

Product no.: 2008020
59.00

Tax included and free shipment to spain



The Victron BlueSolar 12/24V 5A LCD USB PWM Regulator, glass screen facilitating the monitoring and configuration of the regulator.

 

Characteristics of the Victron BlueSolar 12/24V 5A LCD USB PWM Regulator

The range of Victron BlueSolar LCD USB PWM regulators is made up of charge regulators between 5A and 30A for 12 and 24V systems and three PWM models that work at 48V and up to 30A.

These regulators have several characteristics of their own; however, the notable features are that they have an integrated screen and are also compatible with lithium batteries.

As specified above, the Victron BlueSolar 12/24V 5A LCD USB PWM controller incorporates a liquid crystal display to monitor and configure the device, as well as a load output to prevent the battery from being over-discharged by connecting all the loads at the load output.

This output will disconnect the load when the battery has been discharged to a preset voltage. Some loads, especially inverter loads, are best connected directly to the battery, and the remote control of the inverter to the load output.

A special interface cable may be required, in this case consult the manual where these details are detailed. The connection and disconnection voltage are adjustable.

The Victron BlueSolar 12/24V 5A PWM regulator has day and night programming of the load output, this option allows you to preset the ON-time after twilight, optimizing the operation of the system.

The battery charging algorithm is programmable, as stated above, for AGM batteries, GEL, open lead acid batteries and lithium batteries. The compatibility of charge regulators with lithium batteries that integrate an LCD screen is an added value for this manufacturer, which is recently developing with the aim of reaching a more varied public.

The Victron BlueSolar 12/24V 5A PWM regulator has two 5-volt USB outputs with a maximum current of both outputs together of 2A.

 

Install PWM Regulator BlueSolar 12/24V 5A Victron

It is convenient that the Victron BlueSolar 12/24V 5A PWM regulator be installed on a flat horizontal surface located indoors or in a place protected from high temperatures, direct sunlight or humidity that could interfere with its correct operation.

It is recommended that the Victron BlueSolar 12/24V 5A PWM regulator be installed by a professional or someone with basic knowledge about it, because although the configuration is simple, you must follow the instructions and program the parameters so that the BlueSolar 12/24V PWM regulator 24V 5A Victron is compatible with the rest of the elements of the photovoltaic system.

You can consult the installation manual along with the description of this product, if you have any questions, contact us and our technical team will advise you on the matter.

If you buy the Victron BlueSolar 12/24V 5A PWM regulator together with the rest of the elements to achieve self-consumption in your home, our installers department can carry out the installation and commissioning with a guarantee of operation of both the BlueSolar 12/24V 5A PWM regulator Victron like the rest of the elements of the solar kit.

Browse these categories as well: Solar regulators, Full catalogue, PWM solar regulators without