Victron 10A PWM-Light 12/24V dimmer

Product no.: 2008001
59.00

Tax included and free shipment to spain



The Victron 10A PWM-Light 12/24V Regulator, advanced solar charge controller for isolated installations. Adjust the charging current.

 

Characteristics of the Victron 10A PWM-Light 12/24V Regulator

The Victron 10A PWM-Light 12/24V Solar Charge Controller is a charge controller for low power panels, with a maximum of 150W of power in 12V. It is PWM type, which means that it has pulse width modulation to charge a battery.

The Victron 10A PWM-Light 12/24V Regulator is capable of charging batteries in three stages, initial stage, absorption stage and a final float stage. The Victron 10A PWM-Light 12/24V Regulator is protected against over current, short circuits and reverse connection of solar panels or batteries, it also incorporates an internal temperature sensor to preserve its proper functioning.

 

Victron 10A PWM-Light 12/24V Regulator Applications

The Victron 10A PWM-Light 12/24V Regulator is in charge of controlling the state of charge of the battery, since the charge controllers are installed between the solar panels and the batteries within the photovoltaic solar installation, thus allowing control of the battery overloads and also discharges, as long as we use the consumption output that integrates the Victron 10A PWM-Light 12/24V Regulator itself.

The purpose of this Light range is to also provide control over the consumption output, either manually or automatically, ideal for controlling lights or small scheduled consumption. Using a charge regulator in our solar installation will provide greater durability to the battery, avoiding inappropriate discharges or overvoltages.

 

Victron 10A PWM-Light 12/24V Regulator Programming

The Victron 10A PWM-Light 12/24V Regulator has several LED lights that indicate the state of charge of the batteries in real time and also the state of the consumption output. It indicates three states: low battery, charging battery, and charged battery.

The Victron 10A PWM-Light 12/24V Regulator has a small 2-digit display to program the consumption output in direct current. It can be set as a timer with automatic disconnection or as a lighting function so that the consumption output is activated at night. You can find how to set it in the attached manual.

This charge regulator is a guarantee of the proper functioning of the photovoltaic system, in addition to protecting and caring for the batteries, thus prolonging their useful life.

Browse these categories as well: Solar regulators, Full catalogue, PWM solar regulators without