12/24 / 48v 60A 150v Cynetic Solar Mppt Regulator

Product no.: CYNETIC-2440-12/24
289.00

Tax included and free shipment to spain



The 12/24 / 48v 60A 150v Cynetic Mppt Solar Controller allows you to monitor and configure data wirelessly and connect it to the PC.

 

 

The new Solar Regulator Mppt 12/24 / 48v 60A 150v Cynetic has a large screen for monitoring and adjusting the system, it is fully configurable and has a series of bluetooth and a free Android and Apple mobile application. It allows use at 12, 24 and 48v with an input voltage increased to 150v. We can monitor and configure the solar controller wirelessly. 5-year historical record. Passive cooling of the mppt regulator with aluminum heatsink. Allows you to adjust voltages, charge times and equalization intervals.

 

 

Main features of the new 12/24 / 48v 60A 150v Cynetic Mppt Solar Regulator

  • Multi-peak technology: With its advanced "multi -peak" technology, the mppt voltage regulator allows mppt tracking even when shadows affect the solar panels causing rapid I-V peaks in production. Its mppt charging algorithm significantly increases the efficient use of energy in solar systems and achieves improvements of between 20 and 30% in charging efficiency compared to PWM technology The combination of multiple tracking algorithms allows optimal mapping from the working point of the IV curve in an extremely short time.
  • Series connection of panels: Supports up to 150 volts input, allowing 60 and 72 cell panels to be used in series of 3 panels. 12, 24 and 48v operation allowing the use of 24 volt panels in 12 volt systems.
  • Fully configurable: They allow the use of any type of lead acid, gel or agm battery. User mode to customize the load parameters. You can modify voltages, charging times, automatic equalization intervals ... it also allows the use of lithium batteries (consult). Supports maximum equalization voltages of 17v on 12v systems, 34v on 24v systems and 68v on 48v systems.
  • Historical records: The equipment stores up to five years of system records including minimum voltage, maximum voltage, kilowatts loaded, maximum load current.
  • Protections: The equipment has protection against lightning by TVS diodes. It also has protection against overtemperature, reducing the charging current if it reaches more than 65 degrees without damaging the equipment, although more power than allowed. Protection against reverse polarity and short circuit. IP 32 protection against dusty environments and splashing water.
  • Error codes: Through the error code screen we can easily see when there is an anomaly and identify the cause. Reverse polarity connection, photovoltaic field overvoltage, overload ... all have an error code duly identified in the manual.
  • Programmable consumption output: The 20 amp "load" output allows the use of consumptions directly connected to the equipment that operate at battery voltage (lighting at 12v, 24v, 48v pumps ...) in this mppt solar charge controller In addition, the use of capacitive loads such as small pumps is allowed because the output allows pickup peaks. The output can be programmed for lighting or street lamps with an automatic activation mode from twilight.
  • Software: Using the data cable and the software we can connect the equipment to a PC and monitor, configure voltages, configure charging times, access the historical record, etc. Allows communication by modbus.

 

Regulador_Solar_Mppt_de_12-24-48v_60A_150v_Cynetic_1

The 12/24 / 48v 60A 150v Cynetic Mppt Solar Regulator
On the market there are two types of solar regulators, maximizers or mppt such as the cynetic 20 amp 100v and there are also so-called pwm (pulse width modulation). Solar mppt regulators have many advantages over pwm and are the recommended option as long as the budget allows.

  • In the first place, an mppt regulator allows the series connection of panels, that is, we can enter the regulator at a voltage higher than that of the battery. In this 60Ah cynetic regulator we have a maximum of 150 volts in photovoltaic input open circuit, so for example in a 24 volt system we can connect three 275w Amerisolar panels in series. We will have an input of 90 volts in closed circuit and 110v in open circuit and about 8.7 amps. The mppt regulator will lower that voltage to charge the battery and raise the amps. with what we will have at the output (depending on the charging stage) for example 27 volts and 30 amps of battery charging. By being able to enter a higher voltage, we facilitate series connection by reducing the wiring section and minimizing losses due to voltage drop.
  • Secondly, with a mppt photovoltaic regulator we obtain more production than with a pwm solar charge controller, the mppt takes advantage of 100% of what the photovoltaic panel produces, obtaining yields of up to 30% higher than pwm. With fewer panels we obtain the same performance as with a pwm regulator and more panels, so the higher investment of the mppt is justified by lowering the investment in the photovoltaic panel. For example, 8 300w panels with a pwm dimmer will perform roughly the same as 6 300w panels with a mppt dimmer.
  • Thirdly, we have that the mppt charges more on cloudy days since by connecting panels in series and entering a higher voltage, on cloudy days the mppt solar charge controller will charge earlier thanks to the fact that it will always have enough voltage to overcome to the battery. In an mppt regulator like the cynetic we enter 60 volts, if it is cloudy we can go down to 40-50v which is higher than the 24 volts of the system and therefore it will contribute the load that the panels produce. In the pwm we enter 35 volts, so if it is cloudy we can have less than 24 volts at certain times and we cannot exceed the battery voltage and therefore charge.

Regulador_Solar_Mppt_de_12-24-48v_60A_150v_Cynetic

 

Bluetooth connector and free mobile app on the 12/24 / 48v 60A 150v Cynetic Mppt Solar Regulator
The mppt cynetic controller includes the BT-1 Bluetooth connector that allows synchronization with the mobile phone and through the application we can regulate all the functions and see the status of our system. If we have an Android mobile we must enter google play and search for "solarlink app". We download the application on the mobile and install it. If we have an apple mobile we have to go to the app store and search for "solar app". We download and install on the mobile. Once installed we open the app and in the upper right corner we select add device. Here the bluetooth will appear and we select it. We enter the password that it asks us to be 135790123 and in 10 seconds it will be synchronized with the controller.
To modify parameters we must enter settings and in the upper right corner press + and administrator entering the password 135790123. Once entered we can modify with the SET key as long as the battery type is in user.

 

The most complete mppt solar controller at the best price on the grid
There is no better value display mppt voltage regulator on the market with the configuration and display features of the cynetic mppt. At the price of a pwm solar controller, we can now access the latest generation mppt technology and start getting more performance out of our solar panels.

 

PC SOFTWARE

In addition to the mobile app, if we buy the data cable for the cynetic voltage regulator, we can connect the regulator to a computer to configure and monitor the data.

Browse these categories as well: MPPT Solar regulators, Solar regulators, Full catalogue