Heated anemometer with NPN / PNP or RS485 MODBUS digital output with a heater to work in applications with negative temperatures.

APPLICATIONS

The ANEMO5H25 V3 RS485 MODBUSOUTPUT has been designed for use in industrial applications, cranes, solar panels, wind turbines, weather stations, greenhouses, irrigation systems ...
It is usually connected to tachometric equipment (see references WM44-EVO11 V3, WM44-P V3, WM44-DRM V3), automata (PLCs) or
dataloggers to view the wind speed and / or program alarms at predefined values ​​or obtain records during predetermined periods of time.

OPERATION

• Up to 180 km / h wind speed.
• The output is via RS485 MODBUS RTU communication.
• The anemometer must be placed in a vertical position, leaving the
• cable down.
• Heater runs from -20 ° C with ice and turns off
• automatically at +6 ºC to avoid unnecessary consumption

TECHNICAL CHARACTERISTICS

• Power supply: 15-24Vdc
• Maximum intensity: 1.8A @ 24Vdc

                                            1.2A @ 15Vdc

• Output type: RS485 Modbus
• Consumption with heater: <0.5W (ambient temperature> 6ºC + - 3ºC)
• Average consumption with heating: <17W (ambient temperature> 6ºC + - 3ºC)

MEASURE:

• Range: 3-180 Km / h
• Starting speed: 8 km / h
• Maximum speed: 200 Km / h
• Accuracy: 1 km / h (3-15 Km / h) 3% (15-180 Km / h)

GENERAL

• Material: PZ + FV
• Bearings: X65Cr13 stainless steel
• Connection type: Pre-wired hose 4x0.65 mm2 25m
• Weight: 160g (without hose)
• Dimensions 125 x 139 mm
• Storage temperature: -35º C + 80º C
• Operating temperature without ice: -20º C + 70º C
• EMC: EN 61000-6-2: 2001   /  EN 55022: 2001, Class B
• Protection. IP65 (UNE 20324: 1993)